W00c0n Badge Production
Worked for 11 mins 43 sec
Created 2 threads; Cloned 2 projects
w00c0n 30 badge — RED top board production export
Production-intent two-board clamshell badge for w00c0n 30th anniversary: red top art board with inward-facing addressable LEDs and black bottom electronics/art board for JLCPCB turnkey assembly.
w00c0n 30 badge — BLACK bottom board production export
Production-intent two-board clamshell badge for w00c0n 30th anniversary: red top art board with inward-facing addressable LEDs and black bottom electronics/art board for JLCPCB turnkey assembly.
RED board production completion/export
Starting...
View Thread
BLACK board production completion/export
Starting...
View Thread
I’m blocked now because the account has no available ACUs, so I can’t continue executing tools or wait on the spawned board-completion threads.
Accomplished so far:
- Updated production docs to make the coin-cell/WS2812 voltage, runtime, firmware-cap, P-MOS fault-scope, and one-cell-reversed risks explicit blockers: Production Release Risk Review.
- Re-sourced/updated BOM metadata for the JLCPCB/LCSC parts and documented the audit: JLCPCB BOM Sourcing Audit.
- Updated the firmware, bring-up, stackup/alignment, project specification, and blocker notes with low-battery, validation, and per-board export side/orientation gates.
- Cloned the master into separate RED and BLACK production-export projects and started board-specific completion/export threads, but those did not finish before ACUs became unavailable.
Open items:
- Finish the RED and BLACK board-specific layout/export threads.
- Apply/import artwork and shared outline, or document exact tooling blockers.
- Place aligned standoff holes and correct component sides.
- Route both boards, run/fix ERC/DRC, and export separate JLCPCB Gerber/drill/BOM/CPL packs.
- Validate the CR2032/WS2812 voltage/runtime and parallel-cell fault behavior before any production-ready claim.
Manual export steps
Validation checklist
JLCPCB file list
Production warning notes
