# Arduino Nano Barebones - SMD ## Description Important Note: You must connect your own SPI/ICSP programming header if you want to burn the Arduino bootloader to the MCU. SMD Manufacturing: Need a hotplate and solderpaste Good to haves: - Oscillator Decoupling Caps Expose UART via connector Programming Button Onboard LED Reset Button You don't have to populate everything! Only these are mandatory: Reset Button Find the reference schematic here: https://www.arduino.cc/en/uploads/Main/ArduinoNano30Schematic.pdf ## Project Details - **Owner:** stephank - **Created:** 7/9/2024 - **Last Updated:** 8/19/2024 - **Visibility:** Public - **Forks:** 5 --- *Generated from [https://www.flux.ai/stephank/arduino-nano-barebones-smd](https://www.flux.ai/stephank/arduino-nano-barebones-smd)*