This error means via Through-hole - 1 overlaps pad Red-:Red-. The usual fix is to move the via clear of the pad and reconnect it with a short trace, preserving its net and layer connections—not disable the check.

Switch to Agent mode so I can inspect the exact overlap, adjust the routing, and verify that the error is cleared.

What is Agent mode?

Agent mode lets Flux build, do deep research, validate designs, and work through complex assignments.

Chat mode is just as smart and has the same engineering knowledge, but it cannot work autonomously.

Only Agent mode consumes your plan's included AI usage (measured in ACUs).

I’ll inspect the flagged via and pad, make a local routing correction, then run fresh checks to confirm the overlap is gone without breaking connectivity.

Fixed the Red- via-in-pad error and a second identical issue by removing redundant vias—the plated through-hole pads already provide the layer connections. Fresh checks confirm zero via-in-pad errors, airwires, copper shorts, or floating copper, with existing traces and component positions unchanged.

Separately, 46 redundant-trace warning groups remain untouched; those can be reviewed as a cleanup task.