Wearable Audio Streaming PCB Design

flux

This is the most relevant entry I found related to the topic:
Positioning
To move a component, left-click on it and drag it to the desired position. For rotating a part, there are two options:
  • Right-click on the part you want to rotate and select "Rotate right" or "Rotate left."
  • To rotate parts quickly, use the open or close square brackets [ ]
Note: you will see that moving or rotating a component creates an Object-Specific Layout Rules with the desired position or rotation. You can edit the rule directly instead of using the UI elements.
How do I rotate or flip components?
  • Rotate: Use the ] or [ keys or the context menu.
  • Flip: Press F while a component is selected.
Source
Source
Step 1
Place J1.
  • Move J1 to X = 20 mm, Y = 0 mm
  • Put it on the front side
  • Rotate it so the connector opening faces outward/down off the bottom edge
  • Center it horizontally on the bottom edge
When J1 is placed, reply done and I’ll give you Step 2 for U2.
sme12435

sme12435

yo do it for me

flux

I can’t do that for you directly.
I could not find relevant documentation showing that Flux AI can directly place and orient PCB components for you in the PCB editor, which probably means that feature is not available in Flux.
You can browse:
Inspect current placement
Set board rules
Check DRC issues
Show placement docs
Route planning next
Sign up to send

To get started, talk to Flux or create a New Document.

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    No assets added.

    Remarkable Salmon Sonic Screwdriver

    Remarkable Salmon Sonic Screwdriver thumbnail
    ESP32-S3 Wearable Audio Streaming Pendant (USB-C + LiPo + I2S Mic + microSD + OLED)

    Properties

    40mm x 45mm

    USB-C on one edge; OLED header opposite edge; buttons on sides; keep mic away from power/USB; antenna keepout per ESP32-S3-MINI datasheet

    JLCPCB min trace/space 0.127mm, min drill 0.3mm. Signal trace >=0.2mm, power trace >=0.4mm. USB D+/D- short, matched length. Antenna keepout no copper on all layers. Ground pours on both layers.

    0.2mm

    USB-C USB 2.0 (native ESP32-S3)

    2

    0.4mm

    flowchart TD USB_C["USB-C Receptacle"] --> VBUS["VBUS 5V"] VBUS --> Charger["LiPo Charger TP4056"] Charger --> Protect["Battery Protection DW01A + FET"] Protect --> VBAT["VBAT 3.0-4.2V"] VBAT --> LDO["3.3V LDO"] LDO --> V3V3["3V3 Rail"] USB_C --> USB_DPDM["USB D+ D-"] USB_DPDM --> ESP["ESP32-S3-MINI-1-N8R2"] V3V3 --> ESP V3V3 --> MIC["INMP441 I2S Mic"] V3V3 --> OLED["I2C OLED Header"] V3V3 --> SD["MicroSD Slot"] V3V3 --> UI["Buttons + Status LED"] MIC --> ESP OLED --> ESP SD --> ESP UI --> ESP

    USB_DP/USB_DM, VBUS_5V, VBAT, 3V3

    1S LiPo 3.7V nominal 500mAh (JST-PH-2)

    0.3mm

    ESP32-S3-MINI-1-N8R2 (8MB flash, 2MB PSRAM, onboard antenna)

    2

    TP4056 + DW01A protection, 500mA charge current (PROG=2k)

    0.127mm

    2mm

    2mm radius

    JLCPCB

    Pricing & Availability

    Distributor

    Qty 1

    Arrow

    $0.14–$1.95

    Digi-Key

    $5.46–$7.64

    LCSC

    $33.97–$34.27

    Mouser

    $7.66

    TME

    $0.86

    Verical

    $1.99–$11.38

    Controls