Oscillators
An oscillator is an electronic circuit that generates a periodic, oscillating signal, often a sine wave or a square wave. Oscillators are used in a wide range of applications, including clocks, radios, and sound synthesis. Flux.ai has the world's largest community-driven public library of oscillators, with footprints, symbols, datasheets, and simulation models. This comprehensive resource allows engineers and designers to easily find the oscillator they need for their specific application and use it with confidence. Whether you are working on a simple clock circuit or a complex radio transmitter, Flux.ai's oscillator library has you covered. So, if you are in need of an oscillator for your next project, be sure to check out Flux.ai's extensive collection.
ICM7555IPA+
Timer ICM7555IPA+ DIP-8_L10.1-W6.3-P2.54-LS7.6-BL LCSC Part Number: C1520201 ICM7555 / ICM7556 CMOS Precision Timer – low-power general-purpose timer IC compatible with the classic 555 timer architecture. Available as a single timer (ICM7555) or dual timer (ICM7556). Designed for accurate timing, pulse generation, pulse-width modulation (PWM), frequency generation, delay circuits, oscillators, and sequential timing applications. Features ultra-low supply current, wide operating voltage range (2 V to 18 V), TTL compatibility, adjustable duty cycle, and improved CMOS performance compared to standard bipolar 555 timers. Search Keywords: ICM7555, ICM7556, CMOS 555 Timer, Precision Timer IC, Low Power Timer, General Purpose Timer, PWM Generator, Pulse Generator, Oscillator IC, Delay Timer, Monostable Multivibrator, Astable Multivibrator, Frequency Generator, Timing Circuit, CMOS Timer, Analog Timer IC, Low Power Oscillator, Dual Timer IC, Single Timer IC, 555 Compatible Timer Hashtags: #ICM7555 #ICM7556 #CMOS555 #555Timer #TimerIC #PrecisionTimer #PulseGenerator #PWMGenerator #OscillatorIC #FrequencyGenerator #DelayCircuit #Monostable #Astable #CMOS #LowPowerElectronics #AnalogIC #EmbeddedSystems #ElectronicsDesign #CircuitDesign #PCBDesign
13 Uses0 StarsCD4046BE
Phase Lock Loop (PLL) IC 2.4MHz 1 16-DIP (0.300", 7.62mm) CD4046BE is a CMOS Micropower Phase-Locked Loop (PLL) integrated circuit that combines a linear Voltage-Controlled Oscillator (VCO), two phase comparators, a source follower, and a Zener diode in a single package. It is designed for frequency synthesis, frequency detection, FM demodulation, clock recovery, motor speed control, and other synchronization applications. The device operates over a wide supply voltage range and offers low power consumption, high noise immunity, and excellent VCO linearity. Key Features Wide operating supply voltage range: 3 V to 18 V Integrated Voltage-Controlled Oscillator (VCO) Two selectable phase comparators for flexible PLL design Operating frequency range up to approximately 1.4 MHz Very low power consumption High VCO linearity (typically <1%) Low frequency drift with temperature VCO inhibit control for ON/OFF keying applications Built-in source follower output for demodulation applications High noise immunity characteristic of CMOS technology Available in 16-pin PDIP (CD4046BE) package Typical Applications Frequency synthesis and multiplication FM modulation and demodulation Frequency discrimination Clock recovery and data synchronization Tone decoding Voltage-to-frequency conversion FSK modulation/demodulation Motor speed control systems Signal tracking and phase synchronization circuits Hashtags #CD4046BE #PLL #PhaseLockedLoop #VCO #ClockRecovery #FrequencySynthesizer #FMDemodulator #FSKModulation #CMOS #TexasInstruments #AnalogIC #TimingIC #SignalProcessing #EmbeddedSystems #ElectronicsDesign
3 Uses0 StarsABM8-272-T3
Crystal, 12 MHz, SMD, 3.2mm x 2.5mm, 30 ppm, 10 pF, 30 ppm, ABM8 Series ABM8-272-T3 is an ultra-miniature surface-mount quartz crystal from Abracon designed for precision clock generation in embedded systems and microcontroller applications. The crystal operates at 12.000MHz in fundamental AT-cut mode and is packaged in a compact 3.2mm × 2.5mm × 0.8mm ceramic SMD package. It features ±30ppm frequency tolerance and stability, 10pF load capacitance, 50Ω maximum ESR, and low drive power requirements. The device operates across an industrial temperature range of -40°C to +85°C and is hermetically sealed with MSL1 moisture sensitivity rating. The ABM8-272-T3 is approved for use with Raspberry Pi RP2040 and RP235x microcontrollers and is suitable for embedded controllers, IoT devices, communication equipment, industrial electronics, and precision timing applications. Search Keywords: ABM8-272-T3, Abracon ABM8, 12MHz crystal, 12.000MHz crystal, quartz crystal, SMD crystal, ceramic crystal resonator, RP2040 crystal, RP2350 crystal, Raspberry Pi crystal, clock crystal, oscillator crystal, timing crystal, MCU clock source, embedded crystal, surface mount crystal, AT cut crystal, 10pF crystal, 3.2x2.5mm crystal, frequency reference Hashtags: #ABM8272T3 #Abracon #12MHzCrystal #QuartzCrystal #SMDCrystal #ClockSource #Oscillator #TimingCircuit #RP2040 #RP2350 #RaspberryPi #Microcontroller #EmbeddedSystems #IoT #Electronics #ElectronicComponents #PCBDesign #HardwareDesign #FrequencyReference #CrystalOscillator
109 Uses0 Stars
