Microcontrollers
A microcontroller is a small, low-cost computer-on-a-chip that can be used to control electronic devices and systems. It consists of a central processing unit (CPU), memory, input/output (I/O) ports, and other peripherals integrated onto a single chip. Microcontrollers are commonly used in a wide range of applications, including automotive systems, home appliances, industrial automation, and consumer electronics. One of the key benefits of microcontrollers is their ability to interact with their environment through sensors and actuators, making them well-suited for use in embedded systems. These systems are often found in devices that require real-time control or data processing, such as medical equipment, aircraft, and factory automation systems. Flux.ai is home to the world's largest community-driven public library of microcontrollers, with footprints, symbols, datasheets, and simulation models for a wide range of devices. Whether you're a professional engineer looking for a specific microcontroller for your next project, or a hobbyist exploring the possibilities of microcontroller-based systems, Flux.ai has the resources you need to get started.
TPS54531DDA
The TPS54531DDA is a high-efficiency step-down switching regulator designed for converting higher input voltages into regulated lower output voltages. It integrates a power MOSFET, control circuitry, and protection features into a compact package, enabling simplified power supply design for a wide range of industrial, consumer, communication, and embedded applications. The device utilizes current-mode control architecture to provide fast transient response, stable operation, and straightforward loop compensation. It supports a wide input voltage range and delivers efficient power conversion while minimizing external component count. Built-in protection mechanisms enhance system reliability by safeguarding against fault conditions such as overcurrent, undervoltage, and thermal overload. The TPS54531DDA is commonly used in distributed power systems, industrial controllers, networking equipment, telecommunications hardware, battery-powered devices, and embedded computing platforms requiring efficient voltage regulation. Features Integrated high-side power MOSFET High-efficiency buck regulator architecture Wide input voltage operating range Current-mode control operation Adjustable output voltage capability Fast transient response performance Internal soft-start functionality Cycle-by-cycle current limiting protection Thermal shutdown protection Undervoltage lockout protection Frequency compensation support Low standby current operation Compact surface-mount package Suitable for industrial temperature environments Electrical Characteristics Step-down DC/DC conversion topology Fixed switching frequency operation Adjustable output regulation High conversion efficiency across load conditions Stable operation with ceramic output capacitors Integrated power switch architecture Low output voltage ripple performance High load regulation accuracy Applications Industrial automation systems Embedded processors and microcontrollers Communication equipment Networking hardware Distributed power architectures Point-of-load regulators Consumer electronic products Measurement and instrumentation equipment Battery-powered systems Digital control platforms Package Information Package Type: SO PowerPAD package Surface-mount assembly compatible Thermally enhanced package construction Optimized for automated PCB manufacturing Compact footprint for space-constrained designs #commonpartslibrary #integratedcircuit #powermanagement #powersupply #buckconverter #dcdcconverter #switchingregulator #voltageregulator #embeddedsystems #industrialelectronics #powerelectronics #texasinstruments #energyefficiency #electronicsdesign #powersupplycontroller
38 Uses0 Stars7805
5V Positive Fixed TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators RoHS The 7805 is a fixed positive linear voltage regulator IC that provides a regulated +5 V DC output from a higher DC input voltage. It belongs to the widely used 78xx series of voltage regulators, where "05" indicates the 5 V output voltage. The device is commonly used in power supplies for microcontrollers, digital logic circuits, sensors, communication modules, and other electronic systems requiring a stable 5 V supply. It typically requires only a few external capacitors for reliable operation and includes built-in protection features for enhanced robustness. Key Features Fixed 5 V regulated output voltage Output current capability up to 1 A to 1.5 A (depending on manufacturer, package, and thermal conditions) Wide input voltage range (typically up to 35 V maximum) Internal thermal overload protection Internal short-circuit current limiting Safe Operating Area (SOA) protection Requires minimal external components Good line and load regulation Available in common packages such as TO-220, TO-263, and others Suitable for embedded systems, industrial controls, instrumentation, and general-purpose power supplies Typical Applications 12 V to 5 V power conversion Microcontroller and development board power supplies Embedded and IoT devices Digital logic circuits (TTL/CMOS) Sensor and communication module power regulation Educational and hobby electronics projects #CommonPartsLibrary #IntegratedCircuit #PowerManagement
200 Uses0 StarsLSM6DSOXTR
The LSM6DSOXTR is a low-power inertial measurement unit integrating a three-axis accelerometer and a three-axis gyroscope within a compact surface-mount package. Designed for motion tracking, gesture recognition, activity monitoring, and sensor fusion applications, the device incorporates embedded machine learning capabilities and programmable finite state machines to enable intelligent edge processing with reduced host processor workload. The sensor supports high-performance motion sensing while maintaining low power consumption, making it suitable for wearable devices, IoT products, industrial monitoring systems, smart home equipment, and portable electronics. Engineering Specification Device Type Six-axis inertial measurement unit featuring a three-axis accelerometer and three-axis gyroscope. Sensor Functions Motion sensing, orientation detection, vibration monitoring, gesture recognition, activity tracking, tilt sensing, and sensor fusion. Integrated Features Embedded machine learning core, finite state machine engine, sensor hub functionality, timestamp generation, event detection, and programmable interrupt generation. Communication Interface Supports digital communication through I²C, SPI, and I³C interfaces for integration with microcontrollers and embedded processors. Power Characteristics Optimized for low-power operation with multiple performance modes supporting battery-powered and always-on applications. Measurement Capabilities Provides configurable acceleration and angular rate measurement ranges with programmable output data rates and digital filtering options. Embedded Intelligence Includes on-chip machine learning and event classification capabilities to enable local data processing and reduce system power consumption. Package Style Compact surface-mount LGA package suitable for space-constrained electronic designs. Applications Wearable electronics, asset tracking devices, industrial sensors, robotics, smart appliances, navigation systems, handheld devices, health monitoring equipment, and IoT products. Manufacturer STMicroelectronics. Hashtags #LSM6DSOXTR #STMicroelectronics #IMU #MotionSensor #Accelerometer #Gyroscope #SensorFusion #MachineLearningCore #EmbeddedSystems #WearableElectronics #IndustrialAutomation #IoT #SmartDevices #MEMS #CommonPartsLibrary
162 Uses0 StarsSIM800L
The SIM800L is a compact quad-band GSM/GPRS cellular communication module designed for embedded wireless applications requiring voice, SMS, and packet data connectivity. It integrates a complete GSM/GPRS protocol stack and supports communication over standard cellular networks, enabling reliable remote monitoring, control, telemetry, asset tracking, and Internet of Things deployments. The module features low power consumption, a compact surface-mount package, and a UART-based AT command interface for straightforward integration with microcontrollers, processors, and embedded systems. It supports voice calls, SMS messaging, GPRS data transmission, and network services while providing flexible interfacing options for audio and peripheral connectivity. Designed for industrial and consumer electronic applications, the SIM800L delivers dependable wireless communication performance in compact and power-sensitive designs. Its broad network compatibility and extensive software support make it a widely adopted solution for GSM-based connected devices. Features Quad-band GSM/GPRS cellular connectivity Voice call functionality with integrated audio interface SMS text messaging support GPRS packet data communication capability Standard AT command interface UART serial communication interface Low-power operating modes Compact surface-mount package Embedded TCP/IP protocol support Real-time clock functionality DTMF detection and generation Caller identification support SIM card interface integration Antenna interface for cellular communication Wide operating temperature capability Suitable for battery-powered applications Applications Internet of Things devices Remote monitoring systems Wireless telemetry equipment Smart metering solutions Asset tracking systems Vehicle tracking devices Industrial automation equipment Security and alarm systems Wireless data loggers Remote control applications Point-of-sale terminals Embedded communication systems Electrical Characteristics GSM/GPRS cellular network operation Low-voltage power supply architecture Serial UART host interface Integrated RF transceiver SIM card support interface Audio input and output connectivity Low standby power consumption Hardware and software power management support Mechanical Characteristics Compact SMT module package PCB-mountable design Integrated RF connection interface Embedded system integration optimized Lightweight construction Compliance and Reliability GSM standard compliant GPRS standard compliant Industrial embedded communication suitable Designed for long-term operational reliability Compatible with standard cellular infrastructure #commonpartslibrary #wirelesscommunication #gsmmodule #gprs #sim800l #cellularmodule #iot #embeddedsystems #telemetry #wirelessconnectivity #industrialelectronics #communicationmodule #remotecontrol #trackingdevice #machinetomachine #smtmodule
46 Uses0 StarsTPS3839G33DBZT
The TPS3839G33DBZT is an ultra-low-power voltage supervisor designed to monitor system supply rails and provide reliable reset signaling for microcontrollers, processors, FPGAs, and other digital systems. The device continuously supervises the supply voltage and asserts a reset output when the monitored voltage falls below the factory-programmed threshold, ensuring proper system startup, shutdown, and fault recovery. Its low quiescent current makes it particularly suitable for battery-powered, portable, and energy-efficient applications where power consumption is critical. The device features a precision voltage monitoring architecture with a fixed reset threshold optimized for nominal logic supply rails. It provides a stable reset output with an internally defined reset timeout period, eliminating the need for external timing components. The compact package and robust noise immunity make it ideal for embedded systems, industrial controls, consumer electronics, IoT devices, medical equipment, and wireless communication platforms. Key Features Ultra-low quiescent current operation Precision fixed-voltage supervision Factory-programmed reset threshold for logic supply monitoring Active-low reset output Internal reset timeout delay High threshold accuracy over temperature Fast response to undervoltage conditions Push-pull reset output configuration No external components required for operation Compact surface-mount package Wide operating temperature range High reliability and low power consumption Applications Microcontroller reset generation Embedded control systems Battery-powered electronics Industrial automation equipment IoT and wireless sensor nodes Portable medical devices Consumer electronics Data acquisition systems Power management subsystems Communication and networking equipment Electrical Characteristics Fixed supply voltage monitoring Precision undervoltage detection Low operating current Integrated reset timing circuitry Stable reset assertion during power-up and brownout conditions Noise-tolerant voltage supervision Reliable operation across specified temperature range Package Information Surface-mount package Compact footprint for space-constrained designs RoHS-compliant construction Suitable for automated assembly processes #commonpartslibrary #integratedcircuit #powersupervisor #voltagesupervisor #resetcontroller #powermanagement #embeddedsystems #microcontroller #lowpower #batterypowered #industrialelectronics #iot #electronicsdesign #semiconductor #texasinstruments
87 Uses0 StarsB0505S-1WR3
The B0505S-1WR3 is a compact isolated DC-DC power converter module designed to provide regulated power conversion while maintaining galvanic isolation between input and output circuits. The module incorporates high-frequency switching technology and transformer isolation to deliver stable power with reduced noise coupling and improved system safety. It is widely used in industrial control systems, communication equipment, instrumentation, data acquisition devices, medical electronics, and embedded applications where isolated power rails are required to eliminate ground loops and enhance signal integrity. Engineering Specification Device Type Isolated DC-DC Converter Module Power Conversion Topology Transformer-Isolated Switching Regulator Input Configuration Single DC Input Output Configuration Single Isolated DC Output Isolation Method Internal High-Frequency Transformer Isolation Regulation Characteristics Regulated Output Voltage High Conversion Efficiency Low Output Ripple and Noise Electrical Features Galvanic Isolation Between Input and Output Enhanced Noise Immunity Stable Load Regulation Reliable Power Transfer Performance Protection Characteristics Short-Circuit Resistant Design Input-to-Output Isolation Protection Thermal Reliability Enhancement Package Style Single In-Line Through-Hole Package Mounting Type Through-Hole Mounting Environmental Characteristics Industrial-Grade Reliability Long Operational Lifetime High Resistance to Electrical Interference Suitable for Harsh Operating Environments Applications Industrial Automation Equipment Data Acquisition Systems Sensor Signal Conditioning Communication Interfaces Medical Electronics Embedded Control Systems Power Supply Isolation Instrumentation Equipment Process Control Devices Microcontroller-Based Systems Features Compact Integrated Module Isolated Power Distribution High Reliability Design Low Electromagnetic Interference Simple Circuit Integration Efficient Power Conversion Stable Output Performance Wide Application Compatibility RoHS Compliant Construction Manufacturer MORNSUN #commonpartslibrary #powermodule #dcdcconverter #isolatedpower #galvanicisolation #powermanagement #powersupply #powerelectronics #industrialelectronics #instrumentation #communications #embeddedsystems #medicalelectronics #throughhole #electroniccomponents
151 Uses0 StarsTTP223-BA6
The TTP223-BA6 is a single-channel capacitive touch sensor integrated circuit designed to replace traditional mechanical push buttons with a reliable touch-sensitive interface. The device utilizes capacitive sensing technology to detect human touch through conductive and non-conductive surfaces, enabling sleek and durable user interface designs. It features low power consumption, stable operation, high sensitivity, and simple implementation, making it suitable for consumer electronics, home appliances, industrial controls, smart devices, and embedded applications requiring touch-based input functionality. Engineering Specification Device Type Capacitive Touch Sensor Controller Sensing Method Capacitive Touch Detection Channel Configuration Single Touch Input Channel Output Configuration Digital Logic Output Operating Mode Momentary Touch Mode Toggle Touch Mode Sensitivity Control External Adjustment Capability Response Characteristics Fast Touch Detection Response Noise-Resistant Operation Stable Capacitive Sensing Performance Power Characteristics Low Power Consumption Optimized for Battery-Powered Applications Low Standby Current Operation Interface Compatibility Microcontrollers Embedded Processors Digital Logic Systems Human-Machine Interface Circuits Protection Characteristics High Immunity to Environmental Interference Reliable Touch Detection Performance Package Style SOP Surface-Mount Package Mounting Type Surface Mount Technology Applications Touch Buttons Consumer Electronics Home Appliances Smart Switches Control Panels Portable Devices IoT Products Industrial User Interfaces Lighting Controls Interactive Embedded Systems Features Single-Key Capacitive Touch Interface Mechanical Button Replacement Low Power Operation High Sensitivity Detection Adjustable Touch Parameters Compact Package Design Simple Circuit Integration Stable Environmental Performance Long Operational Life RoHS Compliant Construction Manufacturer TONTEK Design Technology #commonpartslibrary #integratedcircuit #touchsensor #capacitivetouch #humanmachineinterface #embeddedsystems #consumerelectronics #industrialelectronics #iot #controlpanel #smartdevices #sensorinterface #digitalinterface #lowpower #electroniccomponents
94 Uses0 StarsNRF52832-QFAB-R
The NRF52832-QFAB-R is a multiprotocol wireless system-on-chip manufactured by Nordic Semiconductor, designed for low-power Bluetooth and embedded wireless communication applications. This highly integrated microcontroller combines a powerful ARM Cortex-M4 processor with advanced wireless connectivity, low-energy operation, and extensive peripheral functionality within a compact surface-mount package. The device supports Bluetooth Low Energy, proprietary wireless protocols, and advanced embedded processing capabilities, making it suitable for IoT devices, wearable electronics, industrial sensors, medical equipment, smart home products, and battery-powered wireless systems. Its integrated radio architecture and optimized low-power design enable extended battery life while maintaining reliable wireless communication performance. The NRF52832-QFAB-R integrates flash memory, RAM resources, analog and digital peripherals, security features, and flexible GPIO functionality to simplify system-level design and reduce external component requirements. The device is widely used in wireless sensor networks, portable electronics, beacon systems, HID devices, and low-power connected embedded applications. Engineering Specification Device Type Wireless microcontroller system-on-chip Processor Architecture ARM Cortex-M4 embedded processor Wireless Connectivity Bluetooth Low Energy and proprietary wireless communication support Radio Features Integrated low-power wireless transceiver architecture Memory Resources Integrated flash memory and RAM Power Characteristics Ultra-low-power operation optimized for battery-powered devices Communication Interfaces SPI I2C UART PWM ADC GPIO NFC support Wireless Features Low-energy wireless networking and secure communication capability Security Features Hardware-based security and encryption support Processing Features Embedded DSP and floating-point processing capability Package Type QFN surface-mount package Mounting Style Surface mount technology Reliability Features Industrial-grade wireless and embedded system reliability Applications IoT devices Wearable electronics Wireless sensor nodes Smart home systems Medical electronics Industrial automation Beacon devices Portable electronics Human interface devices Embedded wireless systems Manufacturer Nordic Semiconductor #commonpartslibrary #nrf52 #nrf52832 #wirelessmcu #bluetoothlowenergy #iot #embeddedhardware #nordicsemi #wirelesscommunication #microcontroller #surfaceountcomponents #wearableelectronics #smarthome #industrialelectronics #lowpowerelectronics
71 Uses0 StarsESP32-S3R8
IC RF TxRx + MCU Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 2.412GHz ~ 2.484GHz 56-VFQFN Exposed Pad The ESP32-S3R8 is a high-performance wireless microcontroller system-on-chip manufactured by Espressif Systems. This device integrates dual-core processing, Wi-Fi connectivity, Bluetooth Low Energy communication, embedded memory resources, and advanced peripheral interfaces within a compact package optimized for embedded and IoT applications. The microcontroller is based on the Xtensa LX7 architecture and is designed to support edge computing, wireless communication, human-machine interfaces, audio processing, AI acceleration, and low-power connected systems. The ESP32-S3R8 includes integrated flash and RAM resources, advanced security functions, vector instruction acceleration, and extensive GPIO/peripheral capability for modern embedded development. The device is widely used in IoT devices, industrial automation systems, smart home equipment, wearable electronics, wireless sensor nodes, edge AI applications, USB-enabled embedded systems, and portable consumer electronics. Its integrated wireless functionality and high processing performance reduce external component count while simplifying system-level design for connected embedded platforms. Engineering Specification Device Type Wireless microcontroller system-on-chip Processor Architecture Dual-core Xtensa LX7 microcontroller architecture Wireless Connectivity Integrated Wi-Fi and Bluetooth Low Energy communication Processing Features High-performance embedded processing with vector instruction acceleration Memory Resources Integrated RAM and embedded memory architecture Communication Interfaces SPI I2C UART I2S USB PWM ADC GPIO interfaces Wireless Features Secure wireless networking and low-power communication support USB Capability Integrated USB communication and device functionality AI and DSP Features Vector instruction support for AI and digital signal processing workloads Security Features Hardware encryption and secure boot support Power Characteristics Low-power operating modes for battery-powered systems Package Type QFN surface-mount package Mounting Style Surface mount technology Applications IoT devices Wireless embedded systems Industrial automation Smart home electronics Edge AI applications Wearable devices Consumer electronics USB-enabled systems Sensor networks Embedded communication platforms Manufacturer Espressif Systems #commonpartslibrary #esp32 #esp32s3 #wirelessmcu #microcontroller #iot #embeddedhardware #wifi #bluetoothlowenergy #espressif #surfaceountcomponents #electronicsdesign #edgeai #wirelesscommunication #consumerelectronics
91 Uses0 StarsMAX3232ECWE+T
2/2 Transceiver Full RS232 16-SOIC The MAX3232ECWE+T is a dual-channel RS-232 transceiver manufactured by Analog Devices under the Maxim Integrated product family. This integrated circuit is designed to provide reliable bidirectional communication between TTL or CMOS logic-level devices and RS-232 serial communication interfaces. The device integrates charge-pump voltage converters and line drivers/receivers, enabling full RS-232 signal compliance using a single low-voltage power supply. The transceiver supports high-speed serial data communication while maintaining low power consumption and robust signal integrity. It is widely used in embedded systems, industrial automation equipment, communication interfaces, instrumentation systems, microcontroller platforms, portable electronics, and legacy serial communication applications. The MAX3232ECWE+T enables seamless voltage-level translation between modern low-voltage digital electronics and traditional RS-232 communication standards. Its compact surface-mount package and integrated functionality reduce external component requirements and simplify serial interface implementation in space-constrained electronic systems. Engineering Specification Device Type RS-232 transceiver interface IC Communication Standard RS-232 serial communication interface Channel Configuration Dual driver and dual receiver architecture Logic Compatibility TTL and CMOS logic-level interface support Voltage Conversion Integrated charge-pump voltage generation Data Communication Bidirectional asynchronous serial communication support Signal Characteristics Compliant RS-232 voltage-level transmission and reception Power Characteristics Low-voltage single-supply operation Data Rate Performance High-speed serial communication capability Protection Features Robust communication interface tolerance and stable signal operation Package Type SOIC surface-mount package Mounting Style Surface mount technology Applications Embedded systems Industrial automation Serial communication interfaces Microcontroller systems Instrumentation equipment Portable electronics Communication gateways Legacy serial devices Data acquisition systems RS-232 interface conversion Manufacturer Analog Devices / Maxim Integrated #commonpartslibrary #rs232 #serialcommunication #transceiver #interfaceic #maximintegrated #analogdevices #embeddedhardware #communicationinterfaces #surfaceountcomponents #electronicsdesign #industrialelectronics #microcontroller #datacommunication #signalconversion
72 Uses0 Stars
