Battery Management ICs

Buck-Boost Regulator Positive Output Step-Up/Step-Down I2C DC-DC Controller IC 40-VQFN (6x6) The LM51772RHAR is a high-performance multi-phase bidirectional buck-boost controller designed for power conversion systems requiring efficient energy transfer between two voltage domains. The device supports seamless operation in both step-up and step-down modes and is optimized for battery-powered, automotive, industrial, and energy storage applications. The controller enables bidirectional current flow, making it suitable for battery charging, backup power systems, supercapacitor management, and high-power USB Type-C power delivery applications. The device integrates advanced control architecture for high efficiency across a wide operating range while supporting programmable current regulation, voltage regulation, and protection features. Multi-phase capability allows reduced input and output ripple currents, improved thermal distribution, and higher overall power capability. The controller supports external MOSFETs for scalable power design flexibility and includes comprehensive monitoring and fault management functions. The LM51772RHAR is designed for operation in demanding environments with robust protection features including overvoltage protection, undervoltage lockout, cycle-by-cycle current limiting, thermal shutdown, and fault reporting. Its flexible configuration and high integration level reduce external component count and simplify implementation in high-density power systems. Key Features Bidirectional synchronous buck-boost controller architecture Supports power transfer in both forward and reverse directions Multi-phase operation for increased power capability and reduced ripple Wide input and output voltage operating range High-efficiency synchronous control using external MOSFETs Programmable current and voltage regulation Peak and average current control capability Seamless transition between buck, boost, and buck-boost operating modes Integrated current sensing support Programmable switching frequency synchronization Phase interleaving support for thermal and ripple optimization External clock synchronization capability Soft-start and controlled startup sequencing Comprehensive fault detection and protection functions Overcurrent protection and short-circuit protection Overvoltage and undervoltage protection Thermal shutdown protection Fault status reporting and system monitoring support Designed for automotive and industrial power applications Compact thermally enhanced package Typical Applications Bidirectional battery charging systems Energy storage systems Automotive dual-battery architectures USB Type-C Power Delivery systems Backup power and UPS systems Supercapacitor charging and balancing Industrial DC power conversion Renewable energy power management High-power portable electronics Telecom and server power systems Electrical Characteristics Wide operating supply voltage range High switching frequency operation capability High-current multi-phase scalability Precision current regulation accuracy Low standby power consumption High-efficiency synchronous rectification support Programmable dead-time and switching parameters Stable operation across wide temperature range Package Information Package Type: VQFN Package Suffix: RHA Thermally enhanced exposed pad package Surface-mount implementation Suitable for automated assembly processes #commonpartslibrary #integratedcircuit #powermanagement #buckboost #dcdcswitchingcontrollers

Mobile Communications PMIC 30-WLP (2.62x3.07) The MAX77958EWV+ is a highly integrated USB Type-C and USB Power Delivery (USB PD) controller designed for portable and battery-powered electronic systems. Manufactured by Analog Devices/Maxim Integrated, the device provides complete USB Type-C Configuration Channel (CC) detection, USB PD protocol management, and power path control functionality within a compact wafer-level package. It is optimized for applications requiring flexible USB charging, power negotiation, and accessory support while minimizing external component count and system complexity. The device integrates a USB Type-C Port Controller (TCPC), Power Delivery Policy Engine, BC1.2 charger detection, VCONN management, dead battery support, and integrated protection features. It supports both sink and dual-role power operation, enabling intelligent power negotiation between connected devices and external power adapters. The controller communicates with the host processor through an I²C interface, allowing firmware-based configuration and monitoring. The MAX77958EWV+ is intended for smartphones, tablets, wearable devices, portable computing platforms, docking stations, embedded systems, and other USB Type-C enabled consumer electronics requiring reliable power delivery and advanced USB connectivity management. Electrical Characteristics The device operates from a low-voltage supply optimized for portable electronic systems. It supports USB Type-C and USB Power Delivery specifications with integrated CC line monitoring and protocol handling. The controller includes internal voltage regulation and protection mechanisms to ensure reliable operation during attachment, detachment, and fault conditions. The integrated USB Power Delivery engine supports multiple power profiles and dynamic voltage negotiation. The device supports sink functionality for charging applications and can be configured for dual-role operation depending on system requirements. Low standby current operation enables efficient battery-powered system implementation while maintaining USB attach detection capability. Functional Features Integrated USB Type-C Port Controller compliant with USB Type-C standards USB Power Delivery protocol engine supporting power negotiation and role management Support for sink and dual-role power configurations Integrated BC1.2 charger detection capability Dead battery support for autonomous attachment detection Integrated VCONN switch and cable orientation detection Automatic CC pin monitoring and cable attach detection I²C interface for host processor communication and configuration Integrated interrupt generation for event handling Support for programmable power profiles and policy management Internal fault monitoring and protection features Compact wafer-level package suitable for space-constrained applications Protection Features Overvoltage monitoring on USB Type-C interface lines Short-circuit protection support Thermal protection and fault detection mechanisms Integrated VCONN current limiting ESD protection for external USB interface connections Safe attach and detach handling during cable insertion events Interface Characteristics USB Type-C CC interface compliant with USB Type-C specifications I²C serial communication interface for host control Interrupt output for event notification Integrated support for orientation detection and cable identification Programmable configuration registers accessible through I²C Package Information Package type is wafer-level package optimized for compact portable designs RoHS compliant and suitable for lead-free manufacturing processes Designed for automated surface-mount assembly Applications Smartphones and mobile devices Tablet computers Wearable electronics Portable battery-powered equipment USB Type-C charging systems Embedded USB PD controllers Docking stations and accessories Consumer electronic products requiring USB Type-C connectivity #commonpartslibrary #integratedcircuit #powermanagement #mobilecommunications

OR Controller N+1 ORing Controller N-Channel 1:1 TSOT-23-8 The LM74700QDDFRQ1 is an automotive-qualified ideal diode controller designed to provide reverse polarity protection, reverse current blocking, and input power path management in low-voltage DC power systems. The device controls an external N-channel MOSFET to emulate an ideal diode with very low forward voltage drop and reduced power dissipation compared to conventional Schottky diodes. It is optimized for automotive and industrial applications requiring robust protection against negative supply voltages, load dump conditions, and reverse battery events. The controller supports wide input voltage operation and integrates fast response circuitry for fault handling and transient protection. The device is suitable for power OR-ing, hot-swap, redundant power supply systems, and battery-connected applications where efficiency, reliability, and thermal performance are critical. Engineering Specification Device Type Automotive ideal diode controller with reverse battery and reverse current protection Qualification Standard AEC-Q100 qualified for automotive applications Control Topology External N-channel MOSFET controller for ideal diode operation Input Voltage Range Supports wide automotive and industrial supply voltage ranges Reverse Polarity Protection Provides protection against negative input voltage conditions and reverse battery connection Reverse Current Blocking Actively prevents reverse current flow during output-to-input fault conditions Forward Voltage Drop Low conduction losses through external MOSFET control for high-efficiency power delivery Transient Protection Capable of handling automotive transient events including load dump conditions Gate Drive Control Integrated gate driver optimized for fast MOSFET switching and protection response Power Path Management Supports power OR-ing and redundant supply architectures Fault Response Fast turn-off during reverse current and fault events Current Consumption Low operating quiescent current suitable for always-on systems Thermal Performance Designed for efficient thermal operation with external MOSFET-based power dissipation Operating Temperature Range Automotive-grade extended temperature operation Package Type Small-outline automotive package suitable for compact PCB layouts #commonpartsLibrary #integratedcircuit #powermanagement #orcontroller

Charger IC Lithium Ion/Polymer 16-WQFN (3x3) The BQ25302RTER is a highly integrated single-cell lithium-ion and lithium-polymer battery charger and power-path management IC developed by Texas Instruments. The device is optimized for compact portable and wearable applications requiring efficient battery charging from USB or low-voltage DC power sources. It integrates a switching charger, power-path management, system voltage regulation, battery FET, and protection features into a compact package suitable for space-constrained designs. The device supports programmable charging current and voltage regulation while maintaining high power conversion efficiency through its switching charger architecture. Integrated power-path management allows the system load to operate simultaneously while charging the battery, improving system reliability and startup behavior when the battery is deeply discharged or absent. The BQ25302RTER includes input current limiting, thermal regulation, battery temperature monitoring support, and multiple safety timers to ensure safe charging operation. The charger automatically manages preconditioning, fast charging, charge termination, and recharge cycles for lithium-based battery chemistries. The device also supports USB-compliant input operation and includes configurable features through an I2C-compatible interface. Its compact WQFN package and high integration level reduce external component count and PCB area, making it suitable for wearable electronics, portable medical devices, IoT products, handheld instruments, wireless accessories, and battery-powered embedded systems. Electrical Characteristics Input operating voltage supports standard USB and low-voltage DC input sources suitable for portable electronics applications. Supports single-cell lithium-ion and lithium-polymer battery charging with programmable charge voltage regulation. Integrated high-efficiency switching charger architecture minimizes power dissipation and improves thermal performance compared to linear chargers. Programmable fast-charge current supports flexible battery capacity scaling and application-specific charging requirements. Integrated power-path management allows simultaneous battery charging and system power delivery. Includes programmable input current limiting to support USB current compliance and adapter protection. Automatic charge cycle management includes precharge, fast charge, termination, and recharge operation. Supports battery temperature qualification using external thermistor monitoring. Integrated thermal regulation dynamically reduces charge current during high-temperature operating conditions. Low quiescent current operation improves standby battery life in portable products. Protection Features Integrated overvoltage protection for input power safety. Battery overcurrent and short-circuit protection enhance system reliability. Thermal shutdown circuitry protects the device during excessive junction temperature conditions. Safety timers monitor charging duration and prevent abnormal charging operation. Input current limiting protects USB ports and weak power adapters from overload conditions. Undervoltage lockout prevents improper operation during insufficient input supply conditions. Interface and Control I2C-compatible serial interface enables configuration and monitoring of charger parameters. Status reporting supports system-level battery and charging management. Programmable charging parameters allow firmware-controlled optimization for different battery chemistries and capacities. Interrupt and status functions support embedded power management architectures. Package Information Supplied in a compact WQFN package optimized for portable and space-constrained PCB layouts. Package design supports efficient thermal dissipation and automated surface-mount assembly processes. RoHS-compliant and suitable for modern lead-free manufacturing requirements. Typical Applications Wearable electronics Wireless earbuds and audio accessories Portable medical devices IoT and embedded battery-powered systems Handheld consumer electronics Portable instrumentation Rechargeable sensor modules Compact USB-powered battery charging systems #CommonPartsLibrary #IntegratedCircuit #PowerManagement #battery charger

Charger IC Multi-Chemistry 32-QFN (4x4) The BQ25730RSNR is a highly integrated synchronous buck battery charger and system power management IC developed by Texas Instruments for applications requiring efficient charging of multi-cell lithium-ion and lithium-polymer batteries. The device is optimized for USB Type-C, USB Power Delivery, industrial, and portable embedded systems where high charging efficiency, flexible power management, and compact implementation are required. The charger integrates high-side and low-side MOSFET gate drivers along with advanced power path management features, enabling efficient battery charging while simultaneously powering the system load. The architecture supports NVDC power path operation, allowing stable system voltage regulation even when the battery is deeply discharged or absent. The device supports a wide operating input voltage range and programmable charging parameters suitable for various battery chemistries and capacities. Integrated input current optimization and dynamic power management help maximize available adapter power while preventing overload conditions. The BQ25730RSNR communicates with the host processor through an I²C interface, enabling software configuration, telemetry monitoring, and fault management. Internal ADC functionality provides real-time monitoring of charging voltage, current, temperature, and system operating conditions. Its high integration level reduces external component count and PCB area, making it suitable for compact industrial and portable power applications. Electrical Characteristics Wide input voltage operating range compatible with USB PD adapters and industrial power sources. Supports multi-cell lithium-ion and lithium-polymer battery charging configurations. High-efficiency synchronous buck charging architecture. Programmable charge current and charge voltage through digital control interface. Integrated ADC for system telemetry and power monitoring. Dynamic power management optimizes adapter utilization and system stability. Low standby current operation for battery-powered systems. Charging Features Constant current and constant voltage charging modes. Programmable input current limiting for USB and adapter compliance. Battery preconditioning and charge termination functionality. Support for fast charging operation with thermal regulation. Power path management enables simultaneous battery charging and system operation. Automatic recharge and battery maintenance functionality. Protection Features Input overvoltage protection. Battery overvoltage and overcurrent protection. Thermal regulation and thermal shutdown protection. Short-circuit and fault condition protection. Battery temperature monitoring support using external NTC thermistors. Reverse current protection and adapter isolation. Interface and Control I²C serial communication interface for configuration and monitoring. Programmable charging profiles and operating parameters. Interrupt and status reporting capabilities. Integrated telemetry reporting for voltage, current, and temperature measurements. Autonomous operation capability with minimal host intervention. Package Information Package type is WQFN. Compact thermally enhanced surface-mount package. Optimized for automated PCB assembly and high-density layouts. Applications USB Type-C and USB Power Delivery systems. Industrial portable electronics. Embedded computing platforms. Portable medical and instrumentation equipment. Battery-powered industrial controllers. Handheld terminals and data acquisition systems. Portable consumer and commercial electronics. #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

Charger IC Lithium Ion 16-VQFN (3x3) The BQ24075RGTR is a standalone linear charger and power-path management integrated circuit developed by Texas Instruments for single-cell lithium-ion and lithium-polymer battery applications. The device is designed for portable and space-constrained electronic systems requiring efficient battery charging, USB compatibility, and simultaneous system power delivery. The integrated dynamic power-path management architecture enables the system load to be powered while independently charging the battery. The charger supports operation from either a USB power source or an external adapter and includes programmable charging and input current limiting functions for optimized power management. The device incorporates multiple protection and monitoring features including thermal regulation, overvoltage protection, reverse current protection, battery temperature monitoring, and safety timers. The BQ24075RGTR also provides battery disconnect capability through the SYSOFF control function, making it suitable for low-power and portable embedded designs. Typical applications include portable consumer electronics, handheld instruments, wearable devices, wireless accessories, battery-powered IoT equipment, medical portable systems, and embedded rechargeable products. Device Features Standalone single-cell lithium-ion and lithium-polymer battery charger Integrated power-path management architecture Simultaneous battery charging and system power support USB-compatible input current limiting Programmable fast-charge current capability Dynamic power management for unstable or limited input sources Battery temperature monitoring through external thermistor input Integrated thermal regulation and protection mechanisms Reverse current, short-circuit, and input overvoltage protection Programmable safety timers for pre-charge and fast-charge modes Charging status and power-good indication outputs Battery disconnect functionality through SYSOFF control Compact surface-mount VQFN package implementation Electrical Characteristics Designed for single-cell lithium-ion or lithium-polymer batteries Fixed battery regulation voltage suitable for standard single-cell charging Supports USB and external adapter input operation Linear charging topology Wide operating temperature range for portable and industrial applications Programmable input current limit for USB compliance and adapter compatibility Package Information Package Type: VQFN Pin Configuration: Sixteen-pin package Mounting Style: Surface mount Package Dimensions: Compact three-millimeter square footprint Functional Overview The BQ24075RGTR manages power distribution between the external input source, the system load, and the rechargeable battery. When external power is present, the device prioritizes powering the system while charging the battery according to programmable charging parameters. Dynamic power management prevents excessive loading of weak USB or adapter sources by automatically reducing charging current when necessary. Thermal regulation circuitry continuously monitors device temperature and adjusts charging operation to maintain safe operating conditions. Additional integrated protection functions ensure reliable operation during fault conditions such as input overvoltage, battery temperature abnormalities, reverse current flow, and output short circuits. #commonpartslibrary #integratedcircuit #powermanagement

FS8205A dual N-channel enhancement mode MOSFET, 20V drain-source voltage, 6A drain current, low RDS(on) 22.5mΩ at VGS=4.5V and 27mΩ at VGS=2.5V, low gate charge, ±12V gate-source voltage, 26A pulsed drain current, 2W power dissipation, suitable for battery protection, load switch and power management applications, SOT-23-6L surface mount package.

USB Controller USB 2.0 I2C Interface 24-QFN (4x4) The STUSB4500QTR is a standalone USB Type-C Power Delivery (PD) controller from STMicroelectronics designed for power sink applications (devices that receive power, like chargers, IoT devices, or battery-powered systems). It enables automatic negotiation of USB Power Delivery contracts (up to 100 W: 20 V / 5 A) without requiring an external microcontroller, thanks to its built-in auto-run algorithm. Power profiles (PDOs) can be pre-configured and stored in internal non-volatile memory, simplifying system design and reducing component count. The device is optimized for modern USB-C designs, offering robust protection, high-voltage tolerance, and support for operation even from a dead battery state. Key Features Power Delivery & Control Standalone USB Type-C™ and USB PD sink controller Supports up to 100 W (20 V, 5 A) power negotiation Auto-run mode (no MCU required) for PD negotiation Up to 3 configurable sink PDO profiles stored in NVM Power Management Dead battery mode support (can start with no battery power) Dual power supply inputs: V_SYS: 3.0 V – 5.5 V V_DD: 4.1 V – 22 V Integrated VBUS monitoring and control Integrated Functions Built-in VBUS switch gate drivers (PMOS) Internal/external VBUS discharge paths I²C interface for configuration and monitoring Protection & Reliability Short-to-VBUS protection on CC pins (up to 22 V) High-voltage tolerance: Up to 28 V on VBUS pins ESD protection: 3 kV HBM / 1.5 kV CDM Physical & Environmental Package: QFN-24 (4×4 mm) Operating temperature: –40°C to +105°C Industrial-grade reliability Compliance & Compatibility Certified for: USB Type-C Rev 1.2 USB PD Rev 2.0 Interoperable with USB PD 3.0 #commonpartslibrary #integratedcircuit #usbcontroller