Motor Drivers
A motor driver is a device that controls the speed and direction of a motor. It takes in electrical signals and converts them into motion, allowing the motor to operate as desired. Motor drivers are commonly used in a variety of applications, including robotics, automation, and transportation systems. One company that specializes in motor drivers is Flux.ai, which has the world's largest community-driven public library of motor drivers with footprints, symbols, datasheets, and simulation models. Whether you're a professional engineer or a hobbyist, Flux.ai's comprehensive library can help you find the right motor driver for your project. With a wide range of options available, you're sure to find the perfect fit for your needs.
STDRIVEG600
High voltage half-bridge gate driver for GaN transistors Features • dV/dt immunity ±200 V/ns • Driver current capability: – 1.3/2.4 A source/sink typ @ 25 °C, 6 V – 5.5/6 A source/sink typ @ 25 °C, 15 V • Separated turn on and turn off gate driver pins • 45 ns propagation delay with tight matching • 3.3 V, 5 V TTL/CMOS inputs with hysteresis • Interlocking function • UVLO on low-side and high-side sections • Dedicated pin for shut down functionality • Over temperature protection Applications • High-voltage PFC, DC-DC and DC-AC converters • Switch-mode power supplies • UPS systems • Solar power • Motor driver for home appliances, factory automation and industrial drives. #CommonPartsLibrary #IntegratedCircuit #powermanagement
19 Uses0 StarsTDA1085C
Motor Driver Parallel 16-PDIP The TDA1085C is a universal motor speed controller IC designed for phase-angle control of AC universal motors. It is commonly used in washing machines, power tools, and other appliances requiring closed-loop motor speed regulation using a TRIAC drive stage. Key Features Closed-loop motor speed control TRIAC phase-angle control output Integrated frequency-to-voltage converter Built-in soft-start function Dual acceleration ramp generator Load current limiting protection Tachogenerator feedback sensing Direct AC line supply capability Motor stall and tachometer failure protection Wide operating temperature range Available in DIP-16 package Typical Applications Washing machine motor control AC universal motor drives Industrial motor speed regulators Power tools Sewing machines Small appliance motor controllers Package Information Package Type: PDIP-16 / SOIC-16 Operating Voltage: Typically up to 15 V regulated supply Manufacturer: Originally Motorola / ON Semiconductor #CommonPartsLibrary #IntegratedCircuit #motor-driver
0 Uses0 StarsMMBT2222ALT3G
Bipolar (BJT) Transistor NPN 40V 600 mA 300MHz 300 mW Surface Mount SOT-23-3 (TO-236) The MMBT2222ALT3G is a NPN general-purpose bipolar junction transistor (BJT) manufactured by onsemi, designed in a SOT-23 surface-mount package. It is the SMD version of the well-known 2N2222A transistor family, used for switching and signal amplification in compact electronic circuits. It is widely used in industrial, automotive (AEC-Q101 qualified variants), and general embedded systems due to its reliability, small size, and good electrical performance. Key Features NPN General-Purpose Transistor Suitable for switching and low-power amplification Collector-Emitter Voltage (Vceo) Up to 40 V Collector Current Up to 600 mA Power Dissipation Around 225–300 mW (depending on package conditions) High Frequency Performance Transition frequency up to ~300 MHz DC Current Gain (hFE) Typically ~100 at moderate currents Low Saturation Voltage Efficient switching performance for digital circuits SOT-23 Surface-Mount Package Compact footprint for modern PCB designs Wide Temperature Range Typically -55°C to +150°C RoHS / Lead-Free Compliant Environmentally compliant manufacturing Typical Applications LED switching circuits Relay driver stages MCU signal interfacing (Arduino, ESP32, etc.) Small motor drivers General signal amplification Automotive and industrial control circuits Important Note MMBT2222ALT3G = SMD version (SOT-23) Equivalent to 2N2222A (TO-92 through-hole version) in function, but not in physical package. 2N2222A SOT-23 #commonpartslibrary #transistor #bjt
473 Uses0 Stars2SC5171
Power Bipolar Transistor, 2A I(C), 180V V(BR)CEO, 1-Element, NPN, Silicon, Plastic/Epoxy, 3 Pin The 2SC5171 is a high-voltage, high-speed NPN bipolar junction transistor designed for switching and amplification applications. It is commonly used in power regulation circuits, switching power supplies, and high-voltage driver stages due to its fast switching characteristics and high collector-emitter voltage capability. The device is typically housed in a TO-220 package, providing good thermal performance for medium to high power applications. Key Features High collector-emitter voltage capability Fast switching performance High current handling capability Low saturation voltage Suitable for high-frequency operation Absolute Maximum Ratings Collector-Emitter Voltage (V<sub>CEO</sub>): 1500 V Collector-Base Voltage (V<sub>CBO</sub>): 1500 V Emitter-Base Voltage (V<sub>EBO</sub>): 9 V Collector Current (I<sub>C</sub>): 3 A Collector Power Dissipation (P<sub>C</sub>): 50 W Junction Temperature (T<sub>J</sub>): 150°C Electrical Characteristics (at T<sub>A</sub> = 25°C unless otherwise specified) DC Current Gain (h<sub>FE</sub>): 8 – 40 Collector-Emitter Saturation Voltage (V<sub>CE(sat)</sub>): 3 V (max) Base-Emitter Voltage (V<sub>BE</sub>): ~1.5 V (typ) Collector Cutoff Current (I<sub>CBO</sub>): 1 mA (max) Transition Frequency (f<sub>T</sub>): 4 MHz (typ) Package Information Package Type: TO-220 Mounting Type: Through-hole Pin Configuration: Pin 1: Base Pin 2: Collector Pin 3: Emitter Applications Switching power supplies High-voltage switching circuits CRT display circuits Motor control circuits General-purpose high-voltage amplification #CommonPartsLibrary #Transistors #Bipolar(BJT) #NPN
1 Uses0 Stars
