Motor Drivers
ULN2803ADW
Bipolar (BJT) Transistor Array 8 NPN Darlington 50V 500mA Surface Mount 18-SOIC The ULN2803ADW is a high-voltage, high-current Darlington transistor array designed for interfacing low-level digital logic circuits with high-power loads. The device integrates eight NPN Darlington pairs with common-emitter outputs and suppression diodes for inductive load driving. It is commonly used in relay drivers, LED matrix control, solenoid actuation, motor drivers, lamp control, and industrial automation interfaces. The integrated clamp diodes enable direct driving of inductive loads without requiring additional external protection circuitry. The input stage is compatible with standard TTL and CMOS logic levels, making the device suitable for microcontroller, FPGA, and processor-based systems. The ULN2803ADW provides compact multi-channel switching capability in a wide-body SOIC surface-mount package optimized for automated assembly and high-density PCB layouts. Key Features Eight-channel NPN Darlington transistor array High-current sink driver outputs Integrated flyback suppression diodes TTL and CMOS compatible inputs Open-collector outputs Suitable for inductive and resistive loads High output voltage capability Parallel output operation supported for increased current handling Wide operating voltage range Surface-mount SOIC wide-body package Industrial and embedded control application support Electrical Characteristics Darlington transistor output configuration High DC current gain Low input current requirement Common-cathode clamp diode structure Open-collector output topology Logic-level input compatibility High-voltage output tolerance Multi-channel simultaneous switching support Applications Relay and solenoid drivers Stepper motor interfaces LED and lamp driving Industrial automation systems PLC output stages Embedded control systems Printer and actuator control Automotive electronics Logic buffer and level shifting applications Package Information Package Type: SOIC Wide Body Mounting Type: Surface Mount Multi-pin integrated driver package RoHS compliant options available #commonpartslibrary #integratedcircuit #driveric #darlingtonarray #powermanagement #industrialelectronics #embeddedhardware #relaydriver #motorcontrol #automationelectronics
82 Uses
DRV8833PWR
Dual-channel H-bridge motor driver The DRV8833PWR is a dual H-bridge motor driver IC from Texas Instruments designed for driving small DC motors, stepper motors, solenoids, and other inductive loads in low-voltage battery-powered systems. It integrates two full H-bridge outputs that allow independent or combined control of two motors or one bipolar stepper motor. It is commonly used in robotics, toys, printers, and embedded motion-control applications due to its compact size and built-in protection features. Key Features Dual H-Bridge Motor Driver Drives 2 DC motors independently or 1 bipolar stepper motor Wide Supply Voltage Range Operates from 2.7 V to 10.8 V motor supply (VM) Output Current Capability Up to 2 A peak per H-bridge (package-dependent RMS limits apply) Supports parallel operation for higher current drive Low On-Resistance MOSFET Output Stage Reduces power loss and improves efficiency in battery-powered designs PWM Current Regulation Built-in current limiting and chopping control for better motor performance Multiple Control Modes Forward, reverse, brake, and coast control via simple logic inputs Protection Features Overcurrent protection Short-circuit protection Undervoltage lockout (UVLO) Thermal shutdown Low-Power Sleep Mode Reduces standby current for battery applications Compact Package 16-pin TSSOP (PW package), optimized for space-constrained PCB designs #CommonPartsLibrary #IntegratedCircuit #PowerManagement
194 Uses
STDRIVEG600
High voltage half-bridge gate driver for GaN transistors Features • dV/dt immunity ±200 V/ns • Driver current capability: – 1.3/2.4 A source/sink typ @ 25 °C, 6 V – 5.5/6 A source/sink typ @ 25 °C, 15 V • Separated turn on and turn off gate driver pins • 45 ns propagation delay with tight matching • 3.3 V, 5 V TTL/CMOS inputs with hysteresis • Interlocking function • UVLO on low-side and high-side sections • Dedicated pin for shut down functionality • Over temperature protection Applications • High-voltage PFC, DC-DC and DC-AC converters • Switch-mode power supplies • UPS systems • Solar power • Motor driver for home appliances, factory automation and industrial drives. #CommonPartsLibrary #IntegratedCircuit #powermanagement
4 Uses
TDA1085C
Motor Driver Parallel 16-PDIP The TDA1085C is a universal motor speed controller IC designed for phase-angle control of AC universal motors. It is commonly used in washing machines, power tools, and other appliances requiring closed-loop motor speed regulation using a TRIAC drive stage. Key Features Closed-loop motor speed control TRIAC phase-angle control output Integrated frequency-to-voltage converter Built-in soft-start function Dual acceleration ramp generator Load current limiting protection Tachogenerator feedback sensing Direct AC line supply capability Motor stall and tachometer failure protection Wide operating temperature range Available in DIP-16 package Typical Applications Washing machine motor control AC universal motor drives Industrial motor speed regulators Power tools Sewing machines Small appliance motor controllers Package Information Package Type: PDIP-16 / SOIC-16 Operating Voltage: Typically up to 15 V regulated supply Manufacturer: Originally Motorola / ON Semiconductor #CommonPartsLibrary #IntegratedCircuit #motor-driver
