Interface ICs

USB Controller USB 2.0 I2C Interface 24-QFN (4x4) Standalone USB PD sink controller with short-to-VBUS protections • Auto-run Type-C™ and USB PD sink controller • Dead battery mode support • Up to 3 sink PDO configurable profiles • Dual high power charging path support • Integrated VBUS switch gate drivers (PMOS) • Integrated VBUS voltage monitoring • Internal and/or external VBUS discharge paths • Short-to-VBUS protections on CC pins (22 V) • High voltage capability on VBUS pins (28 V) • Dual power supply (VSYS and/or VDD): – VSYS = [3.0 V; 5.5 V] – VDD = [4.1 V; 22 V] • Debug accessory mode support • Temperature range: -40 °C up to 105 °C • ESD: 3 kV HBM - 1.5 kV CDM • Certified: – USB Type-C™ rev 1.2 – USB PD rev 2.0 (TID #1000133) • Interoperable with USB PD rev 3.0 #CommonPartsLibrary #IntegratedCircuit

IC RF TxRx + MCU Bluetooth Bluetooth v5.3 2.4GHz 48-VFQFN Exposed Pad NRF52832-QFAA-R7 is an ultra-low-power wireless System-on-Chip (SoC) from Nordic Semiconductor, designed for Bluetooth Low Energy (BLE), ANT, NFC, and proprietary 2.4 GHz wireless applications. It integrates a high-performance ARM Cortex-M4F processor, memory, peripherals, and a 2.4 GHz radio into a single chip, making it ideal for IoT devices, wearables, wireless sensors, beacons, and smart peripherals. GHz protocols • 2.4 GHz transceiver • -96 dBm sensitivity in Bluetooth® low energy mode • Supported data rates: 1 Mbps, 2 Mbps Bluetooth® low energy mode • -20 to +4 dBm TX power, configurable in 4 dB steps • On-chip balun (single-ended RF) • 5.3 mA peak current in TX (0 dBm) • 5.4 mA peak current in RX • RSSI (1 dB resolution) • ARM® Cortex®-M4 32-bit processor with FPU, 64 MHz • 215 EEMBC CoreMark® score running from flash memory • 58 μA/MHz running from flash memory • 51.6 μA/MHz running from RAM • Data watchpoint and trace (DWT), embedded trace macrocell (ETM), and instrumentation trace macrocell (ITM) • Serial wire debug (SWD) • Trace port • Flexible power management • 1.7 V–3.6 V supply voltage range • Fully automatic LDO and DC/DC regulator system • Fast wake-up using 64 MHz internal oscillator • 0.3 μA at 3 V in System OFF mode • 0.7 μA at 3 V in System OFF mode with full 64 kB RAM retention • 1.9 μA at 3 V in System ON mode, no RAM retention, wake on RTC • Memory • 512 kB flash/64 kB RAM • 256 kB flash/32 kB RAM • Nordic SoftDevice ready • Support for concurrent multi-protocol • Type 2 near field communication (NFC-A) tag with wakeup-on-field and touchto-pair capabilities • 12-bit, 200 ksps ADC - 8 configurable channels with programmable gain • 64 level comparator • 15 level low power comparator with wakeup from System OFF mode • Temperature sensor • 32 general purpose I/O pins • 3x 4-channel pulse width modulator (PWM) unit with EasyDMA • Digital microphone interface (PDM) • 5x 32-bit timer with counter mode • Up to 3x SPI master/slave with EasyDMA • Up to 2x I2C compatible 2-wire master/slave • I2S with EasyDMA • UART (CTS/RTS) with EasyDMA • Programmable peripheral interconnect (PPI) • Quadrature decoder (QDEC) • AES HW encryption with EasyDMA • Autonomous peripheral operation without CPU intervention using PPI and EasyDMA • 3x real-time counter (RTC) • Single crystal operation • Package variants • QFN48 package, 6 × 6 mm • WLCSP package, 3.0 × 3.2 mm #CommonPartsLibrary #IntegratedCircuit

High-Accuracy, Low-Power, Digital Temperature Sensor With SMBus- and I2C-Compatible Interface The TMP117 is a high-precision digital temperature sensor. It is designed to meet ASTM E1112 and ISO 80601 requirements for electronic patient thermometers. The TMP117 provides a 16-bit temperature result with a resolution of 0.0078 °C and an accuracy of up to ±0.1 °C across the temperature range of –20 °C to 50 °C with no calibration. The TMP117 has in interface that is I 2C- and SMBus™-compatible, programmable alert functionality, and the device can support up to four devices on a single bus. Integrated EEPROM is included for device programming with an additional 48-bits memory available for general use. The low power consumption of the TMP117 minimizes the impact of self-heating on measurement accuracy. The TMP117 operates from 1.7 V to 5.5 V and typically consumes 3.5 μA. For non-medical applications, the TMP117 can serve as a single chip digital alternative to a Platinum RTD. The TMP117 has an accuracy comparable to a Class AA RTD, while only using a fraction of the power of the power typically needed for a PT100 RTD. The TMP117 simplifies the design effort by removing many of the complexities of RTDs such as precision references, matched traces, complicated algorithms, and calibration. The TMP117 units are 100% tested on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 accredited standards. • TMP117 high-accuracy temperature sensor – ±0.1 °C (maximum) from –20 °C to 50 °C – ±0.15 °C (maximum) from –40 °C to 70 °C – ±0.2 °C (maximum) from –40 °C to 100 °C – ±0.25 °C (maximum) from –55 °C to 125 °C – ±0.3 °C (maximum) from –55 °C to 150 °C • Operating temperature range: –55 °C to 150 °C • Low power consumption: – 3.5-μA, 1-Hz conversion cycle – 150-nA shutdown current • Supply range: – 1.7 V to 5.5 V from –55 °C to 70 °C – 1.8 V to 5.5 V from –55 °C to 150 °C • 16-bit resolution: 0.0078°C (1 LSB) • Programmable temperature alert limits • Selectable averaging • Digital offset for system correction • General-purpose EEPROM: 48 bits • NIST traceability • SMBus™, I2C interface compatibility • Medical grade: meets ASTM E1112 and ISO 80601-2-56 • RTDs replacement: PT100, PT500, PT1000 2 Applications • Electronic thermometers • Wireless environmental sensors • Thermostats • Automotive test equipment • Wearable fitness and activity monitors • Cold chain asset tracking • Gas meters and heat meters • Temperature transmitters #CommonPartsLibrary #Sensor

The 15ETYRM-3.5-02P-14-00AH is a pluggable terminal block connector designed for secure wire-to-board interconnection in industrial and embedded electronic systems. This connector is intended for reliable field wiring applications where compact size, robust mechanical retention, and simplified installation are required. The connector utilizes a screw-clamp or tension-clamp termination structure to provide stable electrical connectivity for power and signal transmission in control systems, industrial automation equipment, instrumentation, communication devices, and power distribution modules. Its pluggable architecture enables convenient maintenance, modular system assembly, and rapid field replacement without direct PCB soldering operations. The device is optimized for through-hole PCB mounting and supports durable operation in electrically demanding industrial environments. The compact pitch spacing and reinforced housing design make it suitable for high-density electronic assemblies requiring dependable terminal connections and long-term operational stability. Engineering Specification Device Type Pluggable terminal block connector Connector Configuration Wire-to-board pluggable terminal interface Number of Positions Dual-position terminal connection Pitch Spacing Compact industrial terminal pitch configuration Termination Method Screw-clamp or spring-tension wire termination Mounting Style Through-hole PCB mounting Connection Characteristics Secure removable field wiring interface Mechanical Features High-retention plug and socket mating structure Electrical Characteristics Suitable for low-voltage power and signal transmission Housing Material Flame-retardant insulated connector body Reliability Features Vibration-resistant electrical connection stability Assembly Compatibility Industrial and automated PCB assembly support Applications Industrial automation Control systems Power distribution modules Embedded hardware Communication equipment Instrumentation systems Signal interface boards Factory automation Power supply connections Field wiring systems Manufacturer Commonly associated with DEGSON or compatible terminal block manufacturers #commonpartslibrary #terminalblock #pluggableconnector #wiretoboard #industrialconnectors #embeddedhardware #electronicsdesign #throughholecomponents #industrialautomation #powerelectronics #signalinterfaces #pcbconnectors #fieldwiring #controlsystems #electromechanical

USBPD and Multiple Fast Charging Protocol Receiving Chip CH224 CH224K is a USB Power Delivery protocol controller integrated circuit designed for fast-charging and programmable USB Type-C power negotiation applications. The device enables intelligent voltage trigger and power profile selection from compatible USB Type-C and USB PD power sources, making it suitable for embedded power systems, portable electronics, development boards, and battery-powered devices. This controller supports automatic communication with USB Type-C power adapters to negotiate higher voltage and current profiles for efficient power delivery. It simplifies USB PD implementation by integrating protocol handling, voltage selection logic, and interface control into a compact low-power solution with minimal external component requirements. The CH224K is widely used in DIY electronics, portable charging systems, embedded controllers, IoT hardware, industrial devices, and USB Type-C powered applications requiring stable and configurable DC power input. Its compact surface-mount package and simplified design architecture enable rapid integration into space-constrained PCB layouts. #commonpartslibrary #usbtypec #usbpd #powerdelivery #powermanagement #embeddedhardware #fastcharging #electronicscomponents #portableelectronics #surfacemountdevice

Small Footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support LAN8720A-CP-TR-ABC is a low-power, single-port 10BASE-T/100BASE-TX Ethernet Physical Layer (PHY) transceiver from Microchip Technology. It is designed to connect a microcontroller, processor, or Ethernet MAC to a standard Ethernet network through an RMII (Reduced Media Independent Interface). The device is widely used in embedded networking applications such as industrial controllers, IoT gateways, IP cameras, networked printers, routers, and ESP32-based Ethernet designs. Key Features Single-chip 10/100 Mbps Ethernet PHY Supports both 10BASE-T and 100BASE-TX Ethernet operation. RMII Interface Reduced pin-count interface for easy connection to Ethernet MACs and microcontrollers. IEEE 802.3 / 802.3u Compliant Fully compliant with Fast Ethernet standards. HP Auto-MDIX Support Automatically detects and configures straight-through or crossover Ethernet cables. Auto-Negotiation Automatically selects the best available speed and duplex mode. Flexible I/O Voltage Supports LVCMOS I/O voltages from 1.6 V to 3.6 V, simplifying interfacing with different processors. Integrated 1.2 V Regulator Allows operation from a single 3.3 V supply, reducing external components. Low-Power Architecture Features multiple power-saving modes through Microchip's flexPWR® technology. Built-in Diagnostics and Reliability Features Loopback modes, automatic polarity correction, link-status monitoring, and wake-up detection. Compact Package Available in a 24-pin SQFN/QFN (4 mm × 4 mm) package for space-constrained designs #CommonPartsLibrary #IntegratedCircuit

3D accelerometer and 3D gyroscope The LSM6DS3TR-C is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope performing at 0.90 mA in high-performance mode and enabling always-on low-power features for an optimal motion experience for the consumer. The LSM6DS3TR-C supports main OS requirements, offering real, virtual and batch sensors with 4 kbyte for dynamic data batching. ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers and gyroscopes. The various sensing elements are manufactured using specialized micromachining processes, while the IC interfaces are developed using CMOS technology that allows the design of a dedicated circuit which is trimmed to better match the characteristics of the sensing element. The LSM6DS3TR-C has a full-scale acceleration range of ±2/±4/±8/±16 g and an angular rate range of ±125/±250/±500/±1000/±2000 dps. High robustness to mechanical shock makes the LSM6DS3TR-C the preferred choice of system designers for the creation and manufacturing of reliable products. The LSM6DS3TR-C is available in a plastic land grid array (LGA) package. Features  “Always-on” experience with low power consumption for both accelerometer and gyroscope  Power consumption: 0.90 mA in combo highperformance mode  Smart FIFO up to 4 kbyte based on features set  Android M compliant  Hard, soft ironing for external magnetic sensor corrections  ±2/±4/±8/±16 g full scale  ±125/±250/±500/±1000/±2000 dps full scale  Analog supply voltage: 1.71 V to 3.6 V  Independent IO supply (1.62 V)  Compact footprint, 2.5 mm x 3 mm x 0.83 mm  SPI & I2C serial interface with main processor data synchronization feature  Pedometer, step detector and step counter  Significant motion and tilt function  Standard interrupts: free-fall, wakeup, 6D/4D orientation, click and double-click  Embedded temperature sensor  ECOPACK®, RoHS and “Green” compliant #CommonPartsLibrary #Sensor

LIN Transceiver with Voltage Regulator, 3.3V, DIP-14 #CommonPartsLibrary #IntegratedCircuits #Interface #Drivers #Receivers #Transceivers #MCP2050

LIN transceiver with Integrated Vreg plus windowed Watchdog Timer #CommonPartsLibrary #IntegratedCircuits #Interface #Drivers #Recievers #Transceivers

Ethernet Physical Layer Controller 10/100/1000 Base-TX PHY RGMII, SGMII Interface 48-VQFN (7x7) #commonpartslibrary #integratedcircuit