This will be a macros lider with a nema17 stepper, tps63020, tmc2209.

Single-subsystem 3.3 V synchronous buck-boost regulator reference built around the TI TPS63802DLAR in a 10-pin VSON package. The design accepts a VBUS input rail into VIN, uses a Bourns SRP4020TA-4R7M 4.7 µH power inductor between L1/L2, and generates PP3V3 from the adjustable TPS63802 output path. The TPS63802 metadata lists a 1.3 V to 5.5 V input range, 2 A output current, selectable switching-frequency modes around 1.4 MHz to 2.1 MHz, and -40 °C to +125 °C junction operation. Support circuitry includes 22 µF and 1 µF ceramic input/output capacitors, a 511 kΩ / 91 kΩ feedback divider for the PP3V3_FB node, a VBUS-derived enable divider using 93.1 kΩ and 100 kΩ resistors, MODE tied to GND, and a 100 kΩ pull-up from PP3V3 to the power-good output. Intended as a reusable compact 3.3 V buck-boost power-supply module for USB, battery, portable, IoT, or embedded sensor designs.

This is a reference design of dc converter based on TPS62200 with input 2.5-6V and output 1.8V 0.3A #dcdc #ti #1V8 #power #referenceDesign #powermanagement #texas-instruments #template #reference-design

Cortex v0 tiny AI wearable schematic: Raytac MDBT53V-1M BLE/nRF5340 module, USB-C LiPo charging, TPS63020 3.3V buck-boost, dual microphones, QSPI flash, tactile button, and WS2812B LED on a ~30mm round 4-layer PCB.

TPS61090 - DC/DC, Step Up 1, Non-Isolated Outputs Evaluation Board #PowerBoost #Charger #EvaluationBoard #module

A buck boost converter that can be powered from a Li-ion battery and output 3.3V @500mA. Powered by the TPS63050YFFR and in the same package as a standard Adafruitbuck converter. Input Voltage range: 2.5V to 5.5V