802.15.4, Bluetooth, WiFi 802.11a/b/g/n/ac/ax, Bluetooth v5.3, Zigbee® Transceiver Module 2.4GHz, 5GHz Antenna Not Included, U.FL/MHF, PCB Trace Surface Mount The LBES5PL2EL-923 is a compact, low-power Bluetooth® Low Energy (BLE) module developed by Murata. It integrates a Nordic Semiconductor SoC (nRF52 series) with an onboard antenna, providing a complete RF solution for wireless connectivity in embedded systems. The module is designed for IoT, wearable, and low-power wireless applications, offering reliable communication, small footprint, and minimal external component requirements. Key Features Integrated Bluetooth® Low Energy (BLE) 5.x compliant module Based on Nordic Semiconductor nRF52 series SoC Built-in chip antenna (no external antenna required) Ultra-low power consumption suitable for battery-powered devices Integrated RF matching and shielding Supports multiple BLE roles (Central, Peripheral, Broadcaster, Observer) Compact surface-mount package Pre-certified RF module (reduces certification effort) Electrical Characteristics Supply Voltage Operating Voltage: 1.7 V to 3.6 V Current Consumption TX Mode: ~5–10 mA (depending on output power) RX Mode: ~5 mA Sleep Mode: < 2 µA RF Characteristics Frequency Band: 2.4 GHz ISM (2400–2483.5 MHz) Output Power: up to +4 dBm Sensitivity: approx. -96 dBm Interfaces UART SPI I²C (TWI) GPIO (multiplexed) ADC inputs PWM Mechanical Specifications Package Type: Surface Mount Module (SMD) Dimensions: ~10 mm × 7 mm × 1.4 mm (approx.) Integrated antenna and shielding Environmental Ratings Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +125°C Compliance & Certifications Bluetooth SIG qualified FCC / IC / CE (module-level certification, varies by variant) RoHS compliant Applications IoT devices Wearables Smart home products Wireless sensors Industrial monitoring systems Pin Configuration (Summary) Power: VDD, GND Communication: UART, SPI, I²C GPIOs: Configurable digital I/O RF: Integrated antenna (no RF pin required) Design Considerations Follow recommended PCB layout for antenna clearance Avoid copper under antenna region Provide stable power supply with proper decoupling capacitors Ensure proper grounding for RF performance #commonpartslibrary #integratedcircuit #transceiver #wireless #rf

RF Switch IC General Purpose SP6T 50Ohm 24-QFN (4x4) PE426462 absorptive SP6T RF switch, HaRP-enhanced UltraCMOS SOI technology, 10MHz to 8GHz frequency range, low insertion loss, high isolation, fast RF rise/fall time, high linearity and low harmonics, operating temperature -55°C to +125°C, suitable for harsh industrial RF applications, no DC blocking capacitors required when no DC voltage is present on RF ports. PE426462

Linear Voltage Regulator IC Positive Fixed 1 Output 150mA SOT-23-5 LP2985IM5-2.7 is a low-dropout (LDO) linear voltage regulator designed to provide a stable 2.7 V output with very low quiescent current and excellent noise performance. It is optimized for battery-powered and noise-sensitive applications, offering high power supply rejection ratio (PSRR) and fast transient response. The device is housed in a compact SOT-23-5 package, making it ideal for space-constrained designs. Key Features Fixed 2.7 V output voltage Low dropout voltage Low quiescent current (IQ) High PSRR for noise-sensitive applications Stable with low ESR ceramic capacitors Thermal shutdown and current limit protection Small SOT-23-5 package RoHS compliant Electrical Characteristics Output Voltage: 2.7 V (fixed) Output Voltage Accuracy: ±1.5% (typical) Maximum Output Current: 150 mA Dropout Voltage: ~280 mV at 150 mA (typical) Quiescent Current (IQ): ~65 µA (typical) Line Regulation: 0.04%/V (typical) Load Regulation: 0.2% (typical) PSRR: Up to 70 dB (at low frequency) Operating Input Voltage Range: 2.5 V to 16 V Operating Temperature Range: -40°C to +125°C Mechanical Characteristics Package Type: SOT-23-5 (DBV) Mounting Type: Surface Mount Pin Count: 5 pins Approximate Dimensions: 2.9 mm × 1.6 mm Pin Configuration (Typical) IN: Input voltage GND: Ground OUT: Regulated output (2.7 V) EN: Enable (active high) BYPASS: Noise reduction / bypass capacitor connection Performance Characteristics Excellent output noise performance (low-noise design) Fast transient response to load changes Stable with small ceramic capacitors (typically 1 µF) Suitable for RF and analog circuits Applications Battery-powered devices Portable electronics RF and wireless modules Sensors and analog circuits Microcontroller power supplies #CommonPartsLibrary #IntegratedCircuit #PowerManagement #voltage-regulator #LDO #LP3985

MAX98357A Series 5.5V 3.2W PCM Input Class D Audio Power Amplifier - TQFN-16 The MAX98357A/MAX98357B is an easy-to-use, low-cost, digital pulse-code modulation (PCM) input Class D amplifier that provides industry-leading Class AB audio performance with Class D efficiency. The digital audio interface automatically recognizes up to 35 different PCM and TDM clocking schemes which eliminates the need for I2C programming. Operation is further simplified by eliminating the need for an external MCLK signal that is typically used for PCM communication. Simply supply power, LRCLK, BCLK, and digital audio to generate audio! Furthermore, a novel pinout allows customers to use the cost-effective WLP package with no need for expensive vias (refer to Application Note 6643: Optimize Cost, Size, and Performance with MAX98357 WLP for more information). The digital audio interface is highly flexible with the MAX98357A supporting I2S data and the MAX98357B supporting left-justified data. Both ICs support 8 channel time division multiplexed (TDM) data. The digital audio interface accepts specified sample rates between 8kHz and 96kHz for all supported data formats. The ICs can be configured to produce a left channel, right channel, or (left/2 + right/2) output from the stereo input data. The ICs operate using 16/24/32-bit data for I2S and left-justified modes as well as 16-bit or 32-bit data using TDM mode. The ICs eliminate the need for the external MCLK signal that is typically used for PCM communication. This reduces EMI and possible board coupling issues in addition to reducing the size and pin count of the ICs. The ICs also feature a very high wideband jitter tolerance (12ns typ) on BCLK and LRCLK to provide robust operation. Active emissions-limiting, edge-rate limiting, and overshoot control circuitry greatly reduce EMI. A filterless spread-spectrum modulation scheme eliminates the need for output filtering found in traditional Class D devices and reduces the component count of the solution. The ICs are available in 9-pin WLP (1.345mm x 1.435mm x 0.64mm) and 16-pin TQFN (3mm x 3mm x 0.75mm) packages and are specified over the -40°C to +85°C temperature range. ● Single-Supply Operation (2.5V to 5.5V) ● 3.2W Output Power into 4Ω at 5V ● 2.4mA Quiescent Current ● 92% Efficiency (RL = 8Ω, POUT = 1W) ● 22.8μVRMS Output Noise (AV = 15dB) ● Low 0.013% THD+N at 1kHz ● No MCLK Required ● Sample Rates of 8kHz to 96kHz ● Supports Left, Right, or (Left/2 + Right/2) Output ● Sophisticated Edge Rate Control Enables Filterless Class D Outputs ● 77dB PSRR at 1kHz ● Low RF Susceptibility Rejects TDMA Noise from GSM Radios ● Extensive Click-and-Pop Reduction Circuitry ● Robust Short-Circuit and Thermal Protection ● Available in Space-Saving Packages: 1.345mm x 1.435mm WLP (0.4mm Pitch) and 3mm x 3mm TQFN ● Solution Size with Single Bypass Capacitor is 4.32mm2 Applications ● Single Li-ion Cell/5V Devices ● Smart Speakers ● Notebook Computers ● IoT Devices ● Gaming Devices (Audio and Haptics) ● Smartphones ● Tablets ● Cameras #commonpartslibrary #integratedcircuit #linearamplifier #mono

Multilayer Ceramic Capacitors MLCC - SMD/SMT KGM31BCG1H102GM NEW GLOBAL PN 50V 1000pF A 581-KGM31BCG1H102GM The 12065A102GAT4A is a multilayer ceramic capacitor (MLCC) manufactured by KYOCERA AVX, designed for surface-mount (SMD) applications in compact electronic circuits. It belongs to the 1206 (3216 metric) package size and provides high stability and precision capacitance, making it suitable for timing, filtering, and RF applications where consistent electrical performance is critical. 🔹 Key Features Capacitance 1000 pF (1 nF) Voltage Rating 50 V DC Tolerance ±2% (tight tolerance for precision circuits) Dielectric Type C0G / NP0 Very stable over temperature and voltage (minimal drift) Package Size 1206 (3.2 mm × 1.6 mm) Mounting Type Surface Mount (SMD / SMT) Operating Temperature −55°C to +125°C Construction Multilayer ceramic structure for reliability and compact size Packaging Tape & Reel (TR) for automated assembly RoHS Compliant Environmentally compliant component #CommonPartLibrary #Capacitors #ceramic #SMD

10 µF ±10% 25V Ceramic Capacitor X7R 0805 (2012 Metric) CL21B106KAYQNNE is a multilayer ceramic capacitor from Samsung Electro-Mechanics designed for general-purpose decoupling, filtering, and energy storage applications in compact electronic systems. Built using advanced ceramic dielectric technology, this surface-mount capacitor provides stable capacitance characteristics, low equivalent series resistance, and reliable high-frequency performance suitable for modern digital and analog circuits. The component is commonly used in power supply filtering, noise suppression, signal coupling, and bypass applications across embedded systems, consumer electronics, communication devices, industrial controllers, and portable hardware platforms. Its compact package enables efficient use of PCB space while supporting automated high-density surface-mount assembly processes. This capacitor is optimized for stable operation under varying temperature and voltage conditions and is widely integrated into microcontroller power rails, RF circuits, sensor modules, and power management systems requiring dependable passive component performance. #commonpartslibrary #capacitor #mlcc #ceramiccapacitor #passivecomponents #powermanagement #embeddedhardware #electronicscomponents #surfacemountdevice #samsungelectromechanics

Linear Voltage Regulator IC Positive Fixed 1 Output 300mA SOT-23-5 The TPS7A20 is an ultra-small, low-dropout (LDO) linear regulator that can source 300mA of output current. The TPS7A20 is designed to provide low noise, high PSRR, and excellent load and line transient performance that can meet the requirements of RF and other sensitive analog circuits. Using innovative design techniques, the TPS7A20 offers an ultra-low noise performance without the addition of a noise bypass capacitor. The TPS7A20 also provides the advantage of low quiescent current, which can be ideal for battery-powered applications. With an input voltage range of 1.6V to 6.0V and an output range of 0.8V to 5.5V, the TPS7A20 can be used for a wide variety of applications. The device uses a precision reference circuit to provide a maximum accuracy of 1.5% over load, line, and temperature variations. The TPS7A20 features an internal soft-start to lower the inrush current, thus minimizing the input voltage drop during start up. The device is stable with small ceramic capacitors, allowing for a small overall solution size. The TPS7A20 has a smart enable input circuit with an internally controlled pulldown resistor that keeps the LDO disabled even when the EN pin is left floating and helps eliminate the external components used to pulldown the EN pin • Low output voltage noise: 7μVRMS – No noise-bypass capacitor required • High PSRR: 95dB at 1kHz • Very low IQ: 6.5μA • Input voltage range: 1.6V to 6.0V • Output voltage range: 0.8V to 5.5V • Output voltage tolerance: ±1.5% (max) • Very low dropout: – 140mV (max) at 300mA (VOUT = 3.3V) – 145mV (max) at 300mA (VOUT = 3.3V, DBV) • Low inrush current • Smart enable pulldown • Stable with 1µF minimum ceramic output capacitor • Packages: – 1mm × 1mm X2SON (DQN) – 0.616mm × 0.616mm DSBGA (YCK) – 0.612mm × 0.612mm DSBGA (YCJ) – 2.9mm × 2.8mm SOT23-5 (DBV) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LDO

CAP SAFETY 2.2nF ±20% 400V 250V TH The DCF222M34Y5UQ6BL7A0 is a multilayer ceramic capacitor manufactured for general-purpose electronic filtering, bypassing, and decoupling applications. This surface-mount passive component is designed to provide stable capacitance performance in compact electronic assemblies while supporting high-density PCB layouts and automated manufacturing processes. The capacitor utilizes ceramic dielectric technology to achieve low impedance and reliable high-frequency performance. It is commonly used in power supply filtering, signal coupling, noise suppression, RF circuits, embedded systems, industrial electronics, and consumer devices. Its compact footprint and stable electrical behavior make it suitable for modern digital and analog circuit designs requiring efficient decoupling and transient response characteristics. Engineering Specification Device Type Multilayer ceramic capacitor Capacitor Technology Ceramic dielectric multilayer structure Mounting Style Surface mount technology Electrical Characteristics Stable capacitance performance for filtering and bypass applications Dielectric Characteristics Designed for general-purpose signal and power conditioning applications Frequency Performance Low impedance behavior suitable for high-frequency operation Thermal Characteristics Stable operation across standard electronic operating temperatures Mechanical Characteristics Compact SMT package optimized for automated PCB assembly Reliability Features High insulation resistance and long operational lifetime Construction Monolithic multilayer ceramic structure Applications Power supply decoupling Signal filtering Noise suppression RF circuitry Embedded systems Industrial electronics Consumer devices Communication equipment Analog and digital circuit stabilization Manufacturer Commonly associated with Murata-style MLCC component series #commonpartslibrary #ceramiccapacitor #mlcc #passivecomponents #surfaceountcomponents #powerelectronics #signalfiltering #decouplingcapacitor #electronicsdesign #embeddedhardware #analogdesign #digitalelectronics #rfdesign #industrialelectronics

Linear Voltage Regulator IC Positive Fixed 1 Output 600mA SOT-25 3.3V LDO AP2112K-3.3 The AP2112K-3.3TRG1 is a low dropout (LDO) linear voltage regulator designed to provide a stable 3.3V output from a higher input voltage. It is optimized for low noise, high power supply rejection ratio (PSRR), and low quiescent current, making it suitable for battery-powered and noise-sensitive applications. The device features current limiting and thermal shutdown protection, ensuring reliable operation under fault conditions. It is commonly used in portable electronics, RF modules, microcontroller power supplies, and other low-power systems. Key Features Fixed output voltage: 3.3V Output current: up to 600 mA Low dropout voltage: ~250 mV at 300 mA load High PSRR: up to 70 dB at 1 kHz Low quiescent current: typically 55 µA Stable with low ESR ceramic capacitors Built-in overcurrent protection Thermal shutdown protection Fast transient response Absolute Maximum Ratings Input Voltage (VIN): up to 6.5 V Output Current: Internally limited Operating Junction Temperature: -40°C to +125°C Storage Temperature: -65°C to +150°C Electrical Characteristics (Typical values unless otherwise specified) Output Voltage Accuracy: ±2% Dropout Voltage: 250 mV @ 300 mA 400 mV @ 600 mA Line Regulation: 0.05%/V Load Regulation: 0.2% Quiescent Current: 55 µA Shutdown Current: <1 µA PSRR: 70 dB @ 1 kHz 45 dB @ 10 kHz Pin Configuration (SOT-23-5 / SC-70-5) VIN – Input voltage GND – Ground EN – Enable (active high) NC – No connection VOUT – Regulated output (3.3V) Package Information Package Type: SOT-23-5 (TRG1 suffix indicates tape & reel) Mounting: Surface mount Small footprint suitable for compact PCB layouts Typical Applications Battery-powered devices Wireless modules (Wi-Fi, Bluetooth, RF) Microcontroller and FPGA power supplies Portable consumer electronics Sensor and analog circuits requiring low noise Compliance & Reliability RoHS compliant Lead-free package Designed for high reliability and long operational life #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator

Linear Voltage Regulator IC Positive Fixed 1 Output 500mA SOT-23-5 The TLV75533PDBVR is a low-dropout (LDO) linear voltage regulator designed to provide a stable 3.3 V output from a higher input voltage source. It features ultra-low quiescent current and high power-supply rejection ratio (PSRR), making it ideal for battery-powered and noise-sensitive applications such as IoT devices, portable electronics, and RF circuits. The device is optimized for fast transient response and stable operation with small ceramic output capacitors. Key Features Fixed output voltage: 3.3 V Low dropout voltage (typ. ~200 mV at full load) Ultra-low quiescent current (typ. 25 µA) High PSRR for noise-sensitive applications Stable with small ceramic capacitors (≥1 µF) Thermal shutdown and overcurrent protection Available in compact SOT-23-5 package (DBV) Absolute Maximum Ratings Input voltage: –0.3 V to 6.5 V Output voltage: –0.3 V to (VIN + 0.3 V) Operating junction temperature: –40°C to +125°C Storage temperature range: –65°C to +150°C Recommended Operating Conditions Input voltage range: 1.45 V to 5.5 V Output voltage: 3.3 V (fixed) Output current: up to 500 mA Operating temperature range: –40°C to +125°C Electrical Characteristics (Typical unless otherwise noted) Output voltage accuracy: ±1% Dropout voltage: ~200 mV @ 500 mA Quiescent current: ~25 µA PSRR: up to 70 dB (at 1 kHz) Line regulation: <0.05%/V Load regulation: <0.5% Pin Configuration (SOT-23-5) Pin 1: IN – Input voltage Pin 2: GND – Ground Pin 3: EN – Enable (active high) Pin 4: NC – No connect Pin 5: OUT – Regulated output Typical Application Power management for microcontrollers and sensors Battery-powered portable devices RF and analog circuits requiring low noise supply IoT and wearable electronics Protection Features Thermal shutdown protection Overcurrent protection Undervoltage lockout (UVLO) #commonpartsLibrary #integratedcircuit #powermanagement #voltageregulator

This project uses an ESP32 microcontroller and OV2640 camera to create a WiFi-enabled digital camera. It uses AMS1117 voltage regulators to provide regulated power, a CH340C for USB communication, and includes capacitors and resistors for circuit balance. Ideal for IoT and edge computing tasks. #referenceDesign #project #ESP32 #ESP32WROVER #RF #WIFI #MCU #reusable #module #edge-computing #edgeComputing #espressif #template

This project comprises a design for an ESP32 based Music Player. It consists of components like ESP32-WROOM-32E for RF/WIFI/MCU functionalities, PCM5102 for audio processing, CH340C for USB to UART communication, and acts as a robust and efficient system for music playback operations. Various supporting components such as capacitors, resistors, LEDs, buttons, etc., further enhance the performance. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #music #MP3 #player #reusable #module #simple-embedded #espressif #sublayout

Amplifier IC Headphones, 2-Channel (Stereo) Class AB 16-WQFN (3x3) The TPA6132A2RTET is a low-power stereo headphone amplifier developed by Texas Instruments for portable and battery-powered audio applications. The device incorporates DirectPath™ technology, eliminating the need for external DC-blocking capacitors while maintaining high audio fidelity and reduced component count. The amplifier supports fully differential as well as single-ended audio inputs, providing improved immunity against system noise and radio-frequency interference. The device is optimized for portable consumer electronics including smartphones, media players, notebook computers, handheld gaming systems, and other compact audio products. Integrated pop and click suppression circuitry minimizes audible transients during startup and shutdown operation, improving user listening experience and protecting connected headphones from unwanted noise. The amplifier provides selectable gain configurations and maintains consistent output performance across a wide operating supply range. Built-in short-circuit protection, thermal shutdown protection, and electrostatic discharge protection enhance system reliability and simplify compliance with industry standards for portable electronic equipment. The TPA6132A2RTET is packaged in a compact surface-mount WQFN package suitable for high-density PCB layouts and space-constrained designs. The device is intended for low-voltage analog audio amplification applications requiring efficient power consumption, low distortion, high power-supply rejection, and capacitor-free headphone drive capability. Key Features DirectPath™ capacitor-free headphone output architecture. Integrated pop and click noise suppression. Differential and single-ended input compatibility. Selectable gain settings. High power-supply noise rejection performance. Improved RF noise immunity. Low quiescent current operation. Short-circuit and thermal-overload protection. ESD-protected outputs. Compact WQFN surface-mount package. Typical Applications Portable audio devices. Smartphones and cellular handsets. Notebook and tablet computers. MP3 and media players. Portable gaming equipment. Battery-powered consumer audio systems. Package Information Package type: WQFN surface-mount package. Mounting type: Surface mount. Manufacturer: Texas Instruments. Part number: TPA6132A2RTET. #commonpartslibrary #integratedcircuit