AC to DC 5v 5w Step Down mini Power Supply Module Converter Intelligent household switch power module #Power-supply

Automotive, 60-V, 6-A, 30-mΩ, one-channel smart high-side switch with adjustable current limit TPS1HTC30-Q1 is a single-channel, smart high-side switch, with integrated NMOS power FET and charge pump, designed to meet the requirements of 24-V automotive battery systems. The low RON(30 mΩ) minimizes device power dissipation driving a wide range of output load current up to 6-A DC, and the 60- V DC operating range improves system robustness. The device integrates protection features such as thermal shutdown, output clamp, and current limit. These features improve system robustness during fault events such as short circuit. TPS1HTC30-Q1 implements an adjustable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The device also provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection enabling better predictive maintenance. TPS1HTC30-Q1 is available in a small 14-pin, 4.40- mm × 5.0-mm HTSSOP leaded package with 0.65- mm pin pitch minimizing the PCB footprint. • Single-channel smart high-side power switch for 24-V automotive systems with full diagnostics • Wide operating voltage range: 6 V to 60 V – OVP protection: 66 V • Low RON: 30-mΩ typical, 55-mΩ maximum • Low standby current: < 0.5 µA • Low quiescent current (Iq): < 2 mA • Improve system level reliability through adjustable current limiting – Current limit: 2 A –16 A • Accurate current sensing: ±4% at 1 A • Protection – Overload and short-circuit protection – Integrated inductive discharge clamp – Undervoltage lockout (UVLO) protection – Loss of GND, loss of supply protection – Reverse battery protection with external components • Diagnostics – On and off state output open-load and short-tobattery detection – Overload and short to ground detection – Absolute and relative thermal shutdown detection • Functional Safety-Capable – Documentation available to aid functional safety system design • Operating junction temperature: –40 to 125°C • Input control: 1.8-V, 3.3-V and 5-V logic compatible • Integrated fault sense voltage scaling for ADC protection • Qualifications – AEC-Q100 qualified for automotive applications • Temperature grade 1: –40°C to +125°C, TA • 14-pin thermally-enhanced TSSOP package TPS1HTC30AQPWPRQ1 #CommonPartsLibrary #IntegratedCircuit

USB Dedicated Charging Port (DCP), Power Switch PMIC SOT-23-6 #commonpartslibrary #USB

Power Switch ICs - Power Distribution 1.6-V to 5.5-V, 20-m?, 4-A low IQ power multiplexer with manual and priority switchover 8-SOT-5X3 -40 to 125 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #load-driver

USB Dedicated Charging Port (DCP), Power Switch PMIC SOT-23-6 #commonpartslibrary #USB

Current Limit SW 4-IN 4-OUT -10V to 16V 7.3A Power Switch Driver 1:1 N-Channel 20-SOIC #CommonPartsLibrary #IntegratedCircuit #PowerManagement #GateDriver #ITS724

USB Dedicated Charging Port (DCP), Power Switch PMIC SOT-23-6 #commonpartslibrary #USB

Smart High-Side Power Switch for Industrial Applications, Four Channels, Rds 90mΩ, SOIC-20W driver fet quad SOIC*7.5x12.8mm*P1.27mm*

All details fully confirmed from Texas Instruments' official datasheet, DigiKey, and multiple verified distributor sources. Here's the complete spec. Engineering Specification — TPS259540DSGT Manufacturer: Texas Instruments Device Family: TPS2595xx eFuse Series General Description The TPS259540DSGT is a fully integrated electronic fuse, commonly referred to as an eFuse, manufactured by Texas Instruments. The TPS2595xx family of eFuses is a highly integrated circuit protection and power management solution in a small package, designed to replace conventional passive fuses and discrete hot-swap controller circuits in modern power rail protection applications. Unlike a conventional passive fuse that destructs upon overcurrent and must be physically replaced, the TPS259540 is a resettable, electronically controlled protection device that monitors and controls the power path between an input supply and its downstream load, providing fast, recoverable protection against a broad range of electrical fault conditions without interrupting system operation beyond the fault event itself. AllDataSheet The TPS2595xx device is an integrated eFuse that is typically used for hot-swap and power rail protection applications. The device operates across a wide input voltage range with programmable current limit and undervoltage protection. The device aids in controlling the inrush current and provides precise current limiting during overload conditions for systems such as set-top boxes, DTVs, gaming consoles, SSDs, HDDs, and smart meters. The device also provides robust protection for multiple faults on the sub-system rail. Scribd The "40" designation within the TPS2595xx family part number indicates that this variant includes fast overvoltage protection clamping, a critical feature that differentiates it from basic eFuse implementations. Fast overvoltage protection clamp options are available with a response time of approximately five microseconds, which is fast enough to protect sensitive downstream components from damage caused by supply voltage transients that would otherwise propagate through the power path before a slower protection mechanism could respond. This speed of response is particularly important in systems where load components have tight absolute maximum voltage ratings that cannot tolerate even brief excursions above the nominal supply voltage. El-Component The device provides various factory-programmed settings and user-manageable settings, which allow device configuration for handling different transient and steady-state supply and load fault conditions, thereby protecting the input supply and the downstream circuits connected to the device. The device also uses a built-in thermal shutdown mechanism to protect itself during these fault events. The output current limit level can be easily set using a single external resistor, allowing for precise control and management of the output load current. Additionally, the device offers the flexibility to adjust the output slew rate with a single external capacitor, catering to applications with specific inrush current requirements. ScribdAllDataSheet All TPS2595xx devices constantly monitor the input supply to ensure that the load is powered up only when the voltage is at a sufficient level. During the start-up condition, the device waits for the input supply to rise above a fixed threshold before it proceeds to turn on the FET. Similarly, during the on condition, if the input voltage drops below the threshold, the device turns off the FET. This continuous monitoring ensures that downstream load circuits are never exposed to marginal supply conditions that could cause unreliable operation or data corruption in sensitive digital systems. Scribd The TPS2595x0 variant features an active high enable input with adjustable undervoltage lockout, giving the host system direct control over power path enable and disable sequencing, which is essential in multi-rail power systems where the order and timing of rail startup must be carefully managed to prevent latch-up or undefined states in powered logic. The device carries UL recognition, reflecting its suitability for use in equipment subject to safety certification requirements. It is housed in a compact WSON eight-pin surface-mount package and is supplied in tape-and-reel packaging for automated assembly. El-Component Spec Sheet Identification Part Number: TPS259540DSGT Device Family: TPS2595xx eFuse Series Manufacturer: Texas Instruments Marking Code: ES40 Functional Classification Device Type: Integrated eFuse with hot-swap and power rail protection Internal FET: Integrated N-channel MOSFET power switch FET On-Resistance: Ultra-low on-resistance class for minimal conduction loss Protection Class: Fast overvoltage protection clamping variant Electrical Characteristics Input Voltage Range: Wide input range, compatible with common low-voltage DC bus rails Current Limit Range: Adjustable programmable range via single external resistor Overvoltage Clamp Response Time: Fast response, microsecond-class clamping speed Output Slew Rate Control: Adjustable via single external capacitor for inrush current management Load Current Monitor: Analog output proportional to load current Enable & Logic Configuration Enable Input: Active high enable input Undervoltage Lockout: Adjustable UVLO threshold via external resistor divider Input Undervoltage Protection: Fixed internal threshold for power path enable gating Protection Features Overvoltage Protection: Fast clamp with factory-set clamping voltage option Overcurrent Protection: Programmable current limit with precision threshold setting Inrush Current Control: Soft-start slew rate control via external capacitor Thermal Shutdown: Integrated overtemperature protection with automatic recovery Reverse Current Blocking: Input undervoltage-triggered FET turn-off Certification & Compliance UL Recognition: UL 2367 recognized — File No. E169910 Export Classification: EAR99 RoHS Compliance: Yes Target Applications Hot-swap power path management Power rail protection for set-top boxes, gaming consoles, and smart meters SSD and HDD power management Digital TV and consumer AV subsystem power protection Industrial multi-rail power sequencing IoT and embedded system power protection Package Package Type: WSON — Small Outline No-Lead, eight-pin Package Designation: DSG suffix Mounting Method: Surface mount technology (SMT) Packaging Format Supply Format: Tape-and-reel — DSGT suffix #TPS259540 #TPS2595xx #TexasInstruments #eFuse #HotSwap #PowerRailProtection #OvervoltageProtection #CurrentLimit #InrushControl #PowerManagement #WSON #SurfaceMount #IntegratedFET #CircuitProtection #PowerSequencing #SmartPower #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #ULRecognized

Automotive Smart High-Side Power Switch – Single-channel 100 V smart high-side N-channel power switch for automotive power distribution, electronic fuse (eFuse), load protection, and battery-connected applications. Operates from a 3.5 V to 80 V supply, drives up to 4 A continuous output current, and features an ultra-low 10 mΩ typical RDS(on) for high-efficiency load switching. Includes adjustable current limiting, reverse current blocking, reverse battery protection, overvoltage protection, undervoltage lockout (UVLO), short-circuit protection, thermal shutdown, slew-rate control, open-load diagnostics, status flag output, and differential input control. Qualified to AEC-Q100 Grade 1, specified for operation over a −40°C to +125°C ambient temperature range, and housed in a 19-pin VSSOP (DGX) package. #TexasInstruments #TPS48110AQDGXRQ1 #TPS48110Q1 #SmartHighSideSwitch #HighSidePowerSwitch #EFuse #LoadSwitch #PowerDistribution #Automotive #CurrentLimiting #ReverseBatteryProtection #AECQ100 #EmbeddedSystems

Single-channel high-side N-channel smart power switch for power distribution, supporting a 6 V to 18 V load voltage and up to 11 A continuous output current. Features 8.8 mΩ typical ON resistance, non-inverting ON/OFF control, and integrated overcurrent, overvoltage, short-circuit, and undervoltage lockout (UVLO) protection. Specified for operation over a −40°C to +150°C junction temperature range and housed in a PG-TSDSO-14-22 (14-pin TSSOP exposed pad) package. #Infineon #BTS70081EPPXUMA1 #SmartPowerSwitch #HighSideSwitch #LoadSwitch #PowerDistribution #PROFET #NChannel #11A #PowerManagement #AutomotiveElectronics #TSDSO14

Automotive Smart High-Side Power Switch – Single-channel N-channel smart high-side power switch for automotive power distribution and wire harness protection. Operates from a 4.1 V to 28 V supply (2.75 V minimum during cranking), supports a 15.7 A nominal load current, and features an ultra-low 3.6 mΩ typical RDS(on). Includes adjustable overcurrent protection (24 A to 137.5 A), integrated I²t wire protection, analog current sensing, open-load detection (ON/OFF state), short-circuit protection, reverse battery protection, overvoltage protection, undervoltage lockout (UVLO), overtemperature protection, slew-rate control, and logic-level control input. Qualified to AEC-Q100 and ISO 26262-compliant, it operates over a −40°C to +150°C junction temperature range and is housed in a 14-pin PG-TSDSO exposed-pad package. #Infineon #BTG7003A1EPWXUMA1 #PROFET #HighSideSwitch #SmartPowerSwitch #Automotive #PowerDistribution #LoadDriver #CurrentSense #WireProtection #AECQ100 #ISO26262 #EmbeddedSystems

2A loading, 2.7-5.5V, 33mΩ USB power switch, active-high #CommonPartLibrary #IntegratedCircuit #PowerManagement #Load-Driver