1.5A USB-Friendly Li-Ion Battery Charger and Power-Path Management IC with 4.2 VBAT The BQ24075TRGTR (from Texas Instruments) is a highly integrated single-cell Li-Ion / Li-Polymer linear battery charger IC with power-path management. It is designed for portable and space-constrained applications, allowing a device to be powered from a USB port or AC adapter while simultaneously charging the battery. The device integrates charging control, power-path management, and safety features into a compact package. A key feature is its Dynamic Power Path Management (DPPM), which ensures the system is powered even when the battery is low or absent, while intelligently managing charging current. Key Features Battery Charging Supports single-cell Li-Ion / Li-Polymer batteries Up to 1.5 A programmable charge current Three-phase charging: Pre-charge (conditioning) Constant current Constant voltage Fixed 4.2 V charge voltage Power Path Management Dynamic Power Path Management (DPPM): Powers system and charges battery simultaneously Prioritizes system load over charging Allows system operation even with: Deeply discharged battery No battery connected Input & Power Features Operates from: USB input (100 mA / 500 mA selectable) AC adapter Programmable input current limit up to 1.5 A Input voltage range: ~4.35 V to 6.4 V (28 V max rating) Input dynamic power management (VIN-DPM) prevents source overload Protection & Safety Thermal regulation and shutdown Over-voltage protection (OVP) Short-circuit and reverse current protection Battery temperature monitoring (NTC thermistor input) Battery disconnect (SYSOFF) feature Control & Status Standalone operation (no MCU required, resistor-programmable) Charge status outputs: Charging Charge complete Power good Physical Characteristics Package: 16-pin VQFN (3 mm × 3 mm) Operating temperature: –40°C to +85°C #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

The TP4056 1A Li-ion Lithium Battery Charging Module with Current Protection – Mini USB is a compact device designed to charge individual lithium ion (Li-Ion) cells that lack their own protective circuit, such as 16550s, with a single cell capacity of 3.7V and 1 Ah or higher. This battery charging module employs the TP4056 charger IC and DW01 battery protection IC to provide a charge current of 1A, which will cease upon completion of the charging process. https://robocraze.com/products/tp4056-lithium-battery-charging-board #PCB #TP4056 #battery

Charger IC Lithium Ion/Polymer 29-VQFN-HR (4x4) The BQ25792 is a fully integrated switch-mode buck-boost charger for 1-4 cell Li-ion batteries and Li-polymer batteries. The integration includes 4 switching MOSFETs (Q1, Q2, Q3, Q4), input and charging current sensing circuits, the battery FET (QBAT) and all the loop compensation of the buck-boost converter. It uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. When system power exceeds the input source rating, battery supplement mode supports the system without overloading the input source. BQ25792 supports the full input and output (OTG) voltage ranges for USB Type-C™ and USB power delivery (USB-PD) applications. • High power density, high integration buck-boost charger for 1-4 cell batteries supporting any USB PD 3.0 profile – Integrates four switching MOSFETs, BATFET – Integrates input and charging current sensing • Highly efficient – 750-kHz or 1.5-MHz switching frequencies – 5-A charging current with 10-mA resolution • 96.5% efficient: 16-V battery at 3A from 20V • Supports a wide range of input sources – 3.6-V to 24-V wide input operating voltage range with 30-V absolute maximum rating – Maximum power tracking with input voltage dynamic power management (VINDPM) up to 22 V and input current dynamic power management (IINDPM) up to 3.3 A – Detects USB BC1.2, SDP, CDP, DCP, HVDCP and non-standard adapters • Dual-input power mux controller (optional) for source selection • Narrow voltage DC (NVDC) power path management • Powers USB port from battery (USB OTG) – 2.8-V to 22-V OTG output voltage with 10-mV resolution to support USB-PD PPS – OTG output current regulation up to 3.32 A with 40-mA resolution • Flexible autonomous and I2C mode for optimal system performance • Integrated 16-bit ADC for voltage, current, and temperature monitoring • Low battery quiescent current – 21 µA for battery only operation – 600 nA in Charger Shutdown Mode • High accuracy – +0.65% to -0.85% charge voltage regulation for 2S-4S batteries – ±5% charge current regulation – ±5% input current regulation • Safety – Thermal regulation and thermal shutdown – Input/battery OVP and OCP – Converter MOSFETs OCP – Charging safety timer • Package – 29-Pin 4 mm × 4 mm QFN #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-Charger

BQ25798RQMR QFN-29_L4.0-W4.0-P0.40-TL-BQ25792RQMR LCSC Part Number: C2876593 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments BQ25798 fully integrated switch-mode buck-boost battery charger for 1-4 cell Li-ion and Li-polymer batteries, supports USB PD 3.0 power profile, integrates four switching MOSFETs, BATFET, input and charging current sensing, 3.6V to 24V input operating range with 30V absolute maximum, 750kHz or 1.5MHz switching frequency, up to 5A charging current with 10mA resolution, up to 96.5% efficiency, supports MPPT for photovoltaic charging, USB BC1.2/HVDCP/non-standard adapter detection, NVDC power path management, USB OTG output from 2.8V to 22V up to 3.32A, I2C control, integrated 16-bit ADC, low quiescent current, thermal regulation, OVP/OCP protection, safety timer, 29-pin 4x4mm QFN package. Search Keywords: BQ25798, Texas Instruments BQ25798, TI BQ25798, BQ25798 battery charger, BQ25798 buck boost charger, BQ25798 Li-ion charger, BQ25798 Li-polymer charger, 1-4 cell battery charger, USB PD 3.0 battery charger, buck boost charger IC, NVDC power path charger, MPPT battery charger IC, photovoltaic battery charger, USB OTG charger IC, 5A charging current charger, I2C battery charger, BQ25798 QFN-29, 4x4mm QFN charger, BQ25798 datasheet Hashtags: #BQ25798 #TexasInstrumentsBQ25798 #TIBatteryCharger #BatteryChargerIC #BuckBoostCharger #LiIonCharger #LiPolymerCharger #1to4CellCharger #USBPDCharger #USBPD30 #NVDCCharger #PowerPathManagement #MPPTCharger #PhotovoltaicCharger #USBOTGCharger #5ACharger #I2CCharger #IntegratedADC #QFN29 #4x4mmQFN

Battery Power Management IC Lithium Ion/Polymer 24-QFN (4x4) nPM1100 is an integrated Power Management IC (PMIC) with a linear-mode lithium-ion/lithium-polymer battery charger in a compact 2.1x2.1 mm WLCSP package. It has a highly efficient, dual-mode configurable output DC/DC buck regulator. nPM1100 is an extremely compact PMIC device, created for space constrained applications with a small lithium-ion or lithium-polymer battery. It is compatible with all nRF52 and nRF53 Series SoCs and supports charging batteries at up to 500 mA through USB, and also delivers up to 150 mA of current to power external components with regulated voltage. A minimum of five passive components are required for operation and the device functions without a control interface. It is the perfect companion for nRF52 and nRF53 multiprotocol SoCs in battery powered designs. Low quiescent current (IQ) extends battery life during shipping and storage with Ship mode, or in operation using auto-controlled hysteretic buck mode for high efficiency down to 1 µA loads. Charge and error indication LED drivers are built in. Charge profile limits are configurable and VBUS current limits can be fixed or auto-controlled with on-chip USB port detection. • 400 mA linear battery charger • Linear charger for lithium-ion/lithium-polymer batteries • Adjustable charge current from 20 mA to 400 mA • Selectable termination voltage of 4.1 V or 4.2 V • Automatic trickle, constant current, and constant voltage charging • Battery thermal protection • Discharge current limitation • JEITA compliant • Li-ion/Li-polymer USB battery charger with a high efficiency buck regulator • 800 nA - Typical quiescent current • 460 nA - Shipping mode quiescent current • Thermal protection • Input regulator • USB compatible current limit of 100 mA and 500 mA • 4.1 V to 6.7 V input voltage range for normal operation • 20 V overvoltage protection • Reverse current protection • 3.0 V to 5.5 V system voltage output • USB port detection supporting the following types: • SDP • CDP/DCP • 1.8 V to 3.0 V, 150 mA step-down buck regulator • Step-down buck regulator with up to 92% efficiency • Automatic transition between hysteretic and pulse width modulation (PWM) modes • Forced PWM mode for clean power operation • Pin-selectable output voltage (1.8 V, 2.1 V, 2.7 V, 3.0 V) • Soft start-up • LED drivers for charger state indication • 5 mA low side LED driver for charging indication • 5 mA low side LED driver for error indication • 2.3 V to 4.35 V battery operating input range • 2.1x2.1 mm WLCSP package • Suitable for two layer PCB design #CommonPartsLibrary #IntegratedCircuit #NordicSemiconductor #nPM1100 #PMIC #BatteryCharger #PowerManagement #LiIon #LiPolymer #BuckConverter #Wearables #IoT #WirelessSensor #LowPowerDesign #USBCharging #EmbeddedSystems #nRF52 #nRF53 #PortableElectronics