STM32F4-based flight controller featuring a 6-axis IMU (accelerometer + gyroscope) for stable flight dynamics and a MAX7456EUI OSD generator for real-time video overlay of flight telemetry. #drone #flightController #STM32F405 #controller #OSD #video #referenceDesign #project #MPU6000 #template

This is a STM32F4 Flight Controller template with 6-axis Accelerometer, Gyroscope. With OSD generator MAX7456EUI. #drone #flightController #STM32F405 #controller #OSD #video #referenceDesign #project #MPU6000 #template

This project is a reference design for an ESP32-WROOM-32D based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32WROOM #RF #WIFI #MCU

Reference design for Li-ion single cell charger based on TP4056 IC. Rprog setting output current to 900mA. VIN and BAT connector are block terminal connectors. #Template #module #referenceDesign #charger #TP4056 #reusable #module #batterycharger #sublayout

This project is a reference design for an ESP32-WROOM-32U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a motherboard for the ESP32-CAM module, which enables easy and flexible WiFi camera applications. The motherboard provides power supply, programming interface, and GPIO expansion for the ESP32-CAM. It also supports external sensors for more functionality. #motherboard #WiFi #MCU #ReferenceDesign #project #ESP32 #camera #reusable #module #edgeComputing #espressif #template

This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #reusable #module #edgeComputing #espressif #template

This project is a reference design for a VL53L0CXV0DH-based sensor circuit. It incorporates the use of a Texas Instruments LP5907MFX-2.8/NOPB to regulate the supply voltage. #referenceDesign #VL53L0 #Module #template #LIDAR #sensor #distance #reusable #module #industrialsensing #stm #sublayout

This project is a reference design for a VL53L1X-based sensor circuit. It incorporates the use of a Texas Instruments LP5907MFX-2.8/NOPB to regulate the supply voltage. #referenceDesign #VL53L1X #Module #template #LIDAR #sensor #distance #reusable #module #industrialsensing #stm #sublayout

This LM2679SX-ADJ reference design is a step-down voltage regulator providing a stable 5V output from a higher input voltage. Ideal for applications needing a regulated 5V supply. #referenceDesign #project #stepDown #voltageRegulator #5V #LM2679SX-ADJ #LM2679-ADJ #LM2679 #Module #subLayout #reusable #module #powermanagement #texas-instruments #sublayout

This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

This project uses an ESP32 microcontroller and OV2640 camera to create a WiFi-enabled digital camera. It uses AMS1117 voltage regulators to provide regulated power, a CH340C for USB communication, and includes capacitors and resistors for circuit balance. Ideal for IoT and edge computing tasks. #referenceDesign #project #ESP32 #ESP32WROVER #RF #WIFI #MCU #reusable #module #edge-computing #edgeComputing #espressif #template

This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This TPS5430DDA-based design is a step-down voltage regulator, converting a higher input voltage to a stable 5V output. Ideal for applications requiring a regulated 5V supply. #referenceDesign #Module #Sublayout #stepDown #voltageRegulator #5V #TPS5430 #TPS5430DDA #reusable #module #powermanagement #texas-instruments #sublayout

This project is a Lithium-ion battery charger circuit utilizing the MCP73831 integrated circuit. It includes input and output connectors, a charging current programming resistor, decoupling capacitors, and a charge status indicator LED. The design can deliver up to 500mA charge current. #project #Template #charger #referenceDesign #batterycharger #template #bms #microchip

This project is a reference design for an ESP32-WROVER-E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32WROVER #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This SN65HVD230DR-based reference design is a CAN bus transceiver circuit that facilitates robust data communication across the CAN network. The design incorporates a variety of capacitors and resistors to maintain signal quality, and it employs a NUP2105L for voltage protection. This circuit is ideally suited for applications that need reliable data communication in automotive or industrial settings. #referenceDesign #Module #CANbus #interface #transceiverCircuit #SN65HVD230 #SN65HVD230DR #reusable #module #canbus #texas-instruments #sublayout

This project is a of ESP32-S3-MINI-1. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes user RGB LED #referenceDesign #Module #ESP32 #ESP32S2 #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a reference design for a 2A Solar Panel Power Manager With 7.2V LiFePO4 Battery and 17V Peak Power Tracking based on LT3652 IC. It includes components like resistors, capacitors, LEDs, and a JST connector for power input and battery connection. The design caters to high input voltage applications and ensures efficient charging with minimal components. #Module #LT3652 #ReferenceDesign #charger #BatteryManagement #solar #reusable #module #bms #analog #LiFePO4 #sublayout

This project is a tag device that uses the ESP32-WROOM-32E to communicate with other BLE devices. It has a USB-C port for power and data, a voltage regulator for stable operation, and 18650 battery. It also has a CH340C chip for USB to serial conversion.. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #tag #18650 #airtag #reusable #module #simple-embedded #espressif

This project is a LoRa to WiFi Gateway using an ESP32 microcontroller. The design incorporates a LoRa transceiver and a WiFi module to facilitate data transfer between LoRa and WiFi protocols. This gateway can be directly implemented in IoT-based applications where field devices using LoRa need to communicate with WiFi-enabled devices. #referenceDesign #project #ESP32 #LoRa #lora #hub #gateway #ESP32WROOM #RF #WIFI #MCU #reusable #module #edge-computing #espressif #seeed #seeed-technology #sublayout

This project is a reference design for an ESP32-S2-WROVER based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32S2 #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a reference design for an ESP-WROOM-02U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP8266 #WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a reference design based on the BQ25895, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #Module #BQ25895 #ReferenceDesign #charger #BatteryManagement #reusable #module #bms #texas-instruments #sublayout

This project is a BLE door and window sensor design that uses a U-blox BMD-330-A-R for BLE communication, a reed switch as a sensor, a multi-color LED for status display, and is powered by VBAT. There's also a programming interface and reset switch included. #WiFi #BLE #MCU #ReferenceDesign #Module #reusable #module #simple-embedded #ublox #sublayout