1/1 Transceiver Half RS422, RS485 8-SOIC These devices have robust 3.3-V drivers and receivers in a small package for demanding industrial applications. The bus pins are robust to ESD events with high levels of protection to Human-Body Model and IEC Contact Discharge specifications. Each of these devices combines a differential driver and a differential receiver which operate from a single 3.3-V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. These devices feature a wide common-mode voltage range making the devices suitable for multi-point applications over long cable runs. These devices are characterized from –40°C to 125°C 1• Small-size VSSOP Packages Save Board Space, or SOIC for Drop-in Compatibility • Bus I/O Protection – >±15 kV HBM Protection – >±12 kV IEC 61000-4-2 Contact Discharge – >±4 kV IEC 61000-4-4 Fast Transient Burst • Extended Industrial Temperature Range –40°C to 125°C • Large Receiver Hysteresis (80 mV) for Noise Rejection • Low Unit-Loading Allows Over 200 Connected Nodes • Low Power Consumption – Low Standby Supply Current: < 2 µA – ICC < 1 mA Quiescent During Operation • 5-V Tolerant Logic Inputs Compatible With 3.3-V or 5-V Controllers • Signaling Rate Options Optimized for: 250 kbps, 20 Mbps, 50 Mbps • Glitch Free Power-Up and Power-Down Bus Inputs and Outputs 2 Applications • Factory Automation • Telecommunications Infrastructure • Motion Control #SN65HVD75D #RS485 #RS422 #Transceiver #TexasInstruments #IndustrialCommunication #FactoryAutomation #MotionControl #TelecomInfrastructure #ESDProtection #HalfDuplex #InterfaceIC #EmbeddedSystems #IndustrialElectronics #DataCommunication

2/2 Transceiver Full RS232 16-SOIC The MAX3232ECWE+T is a dual-channel RS-232 transceiver manufactured by Analog Devices under the Maxim Integrated product family. This integrated circuit is designed to provide reliable bidirectional communication between TTL or CMOS logic-level devices and RS-232 serial communication interfaces. The device integrates charge-pump voltage converters and line drivers/receivers, enabling full RS-232 signal compliance using a single low-voltage power supply. The transceiver supports high-speed serial data communication while maintaining low power consumption and robust signal integrity. It is widely used in embedded systems, industrial automation equipment, communication interfaces, instrumentation systems, microcontroller platforms, portable electronics, and legacy serial communication applications. The MAX3232ECWE+T enables seamless voltage-level translation between modern low-voltage digital electronics and traditional RS-232 communication standards. Its compact surface-mount package and integrated functionality reduce external component requirements and simplify serial interface implementation in space-constrained electronic systems. Engineering Specification Device Type RS-232 transceiver interface IC Communication Standard RS-232 serial communication interface Channel Configuration Dual driver and dual receiver architecture Logic Compatibility TTL and CMOS logic-level interface support Voltage Conversion Integrated charge-pump voltage generation Data Communication Bidirectional asynchronous serial communication support Signal Characteristics Compliant RS-232 voltage-level transmission and reception Power Characteristics Low-voltage single-supply operation Data Rate Performance High-speed serial communication capability Protection Features Robust communication interface tolerance and stable signal operation Package Type SOIC surface-mount package Mounting Style Surface mount technology Applications Embedded systems Industrial automation Serial communication interfaces Microcontroller systems Instrumentation equipment Portable electronics Communication gateways Legacy serial devices Data acquisition systems RS-232 interface conversion Manufacturer Analog Devices / Maxim Integrated #commonpartslibrary #rs232 #serialcommunication #transceiver #interfaceic #maximintegrated #analogdevices #embeddedhardware #communicationinterfaces #surfaceountcomponents #electronicsdesign #industrialelectronics #microcontroller #datacommunication #signalconversion

USB to Serial Port Chip CH9101 CH9101N is a high-speed USB-to-UART bridge IC developed by WCH (Qinheng Electronics). It converts a USB 2.0 Full-Speed interface into a standard asynchronous UART serial interface, enabling seamless communication between a computer and microcontrollers, embedded systems, industrial equipment, and other UART-based devices. The device features an integrated clock oscillator and power-on reset circuitry, minimizing external components and simplifying PCB design. Housed in a compact SOP-8 package, the CH9101N supports UART logic voltages from 1.8 V to 5 V, making it suitable for a wide range of low-power and mixed-voltage applications. It is commonly used for USB debugging, firmware downloading, serial communication, and IoT development. Key Features USB 2.0 Full-Speed compliant device interface USB-to-UART bridge with baud rates up to 3 Mbps Supports 1.8 V, 2.5 V, 3.3 V, and 5 V UART I/O levels Integrated clock oscillator (no external crystal required) Built-in power-on reset circuitry Full-duplex UART communication Supports hardware flow control (RTS/CTS) Compatible with standard virtual COM port (VCP) drivers Compact SOP-8 package with minimal external components Suitable for MCU programming, debugging, and serial communication applications #CH9101N #WCH #USBtoUART #USBBridge #UART #USB20 #SerialCommunication #EmbeddedSystems #Microcontroller #IoT #IndustrialAutomation #Debugging #FirmwareDownload #SOP8 #InterfaceIC

Overvoltage/Surge Protection IC Internal Switch 20-WQFN (3x3) ESD protection and USB charging-port interface IC for USB 2.0 data lines, integrating IEC 61000-4-2 ±15 kV air and ±8 kV contact ESD protection with support for USB Battery Charging Specification Rev. 1.2 charger detection. It operates from a 2.5 V to 5.5 V supply, includes an integrated high-side VBUS switch rated for up to 1.5 A, and is housed in a 6-pin WQFN (RUK) package. #ESDProtection #USB2_0 #USBCharging #BC1_2 #VBUSSwitch #InterfaceIC #TexasInstruments #WQFN6

Asynchronous Communications Interface Adapter (ACIA) – Serial communication interface IC designed for 8-bit microprocessor systems, embedded computers, industrial controllers, terminals, modems, and legacy communication equipment. The Western Design Center W65C51N6TPG-14 provides a simple interface between an 8-bit CPU and serial communication devices, handling the conversion between parallel CPU data and asynchronous serial data. It operates at 5 V, supports communication speeds up to 14 MHz, and uses a 28-pin PDIP through-hole package. #WesternDesignCenter #W65C51N #W65C51N6TPG14 #ACIA #SerialCommunication #InterfaceIC #8BitProcessor #EmbeddedSystems #IndustrialElectronics #ThroughHole #PDIP28

USB Hub Controller USB 2.0 USB Interface 36-SQFN (6x6) USB 2.0 Hi-Speed Hub Controller that provides a 2-port USB hub solution supporting USB 2.0 high-speed (480 Mb/s), full-speed, and low-speed operation. It operates from a 3.0 V to 3.6 V supply, supports SMBus/I²C configuration, integrates USB termination and pull-up/pull-down resistors, and is housed in a 36-pin SQFN package. #Microchip #USB2512BTIM2 #USBHubController #USB20 #HiSpeedUSB #TwoPortHub #SMBus #I2C #36SQFN #InterfaceIC

5.7 kV RMS/1.5 kV RMS, Quad-Channel LVDS 2.5 Gigabit Isolator (0 Reverse Channels) LVDS Digital Isolator 5700Vrms 4 Channel 2.5Gbps 40kV/µs CMTI 28-BSSOP (0.295", 7.50mm Width) The ADN4624 is a quad-channel, signal isolated, low voltage differential signaling (LVDS) buffer that operates at up to 2.5 Gbps with very low jitter. The device integrates Analog Devices, Inc., iCoupler® technology, enhanced for high speed operation to provide drop-in galvanic isolation of LVDS signal chains. AC coupling and/or level shifting to the LVDS receivers and from the LVDS drivers allows isolation of other high speed signals such as current mode logic (CML). The ADN4624 includes a refresh mechanism to monitor the input and output states and ensure they remain the same in the absence of data transitions (for example, at power-on). For lower power consumption and high speed operation with low jitter, the LVDS and isolator circuits rely on 1.8 V supplies. The ADN4624 is fully specified over a wide industrial temperature range and is available in a 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance (for 5.7 kV rms or 8 kVPEAK surge and impulse voltages and reinforced insulation at ac mains voltages) or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance (for basic/functional isolation). FEATURES ► 5.7 kV rms and 1.5 kV rms LVDS isolators ► Complies with TIA/EIA-644-A LVDS signal levels ► Quad-channel configuration ► Any data rate up to 2.5 Gbps switching with low jitter ► 10 Gbps total bandwidth across four channels ► 2.15 ns typical propagation delay ► Typical jitter: 0.82 ps rms random, 40 ps total peak ► Lower power 1.8 V supplies ► ±8 kV IEC 61000-4-2 ESD protection across isolation barrier ► High common-mode transient immunity: 100 kV/μs typical ► Safety and regulatory approvals (28-lead SOIC_W_FP package) ► UL (pending): 5700 V rms for 1 minute per UL 1577 ► CSA Component Acceptance Notice 5A (pending) ► VDE certificate of conformity (pending) ► DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 ► VIORM = 849 VPEAK (working voltage) ► Enable or disable refresh (low speed output correctness check) ► Operating temperature range: −40°C to +125°C ► 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance APPLICATIONS ► Isolated video and imaging data ► Analog front-end isolation ► Data plane isolation ► Isolated high speed clock and data links ► Multi-gigabit serialization/deserialization (SERDES) ► Board-to-board optical replacement (for example, short reach fiber) #CommonPartsLibrary #ADN4624BRNZ #DigitalIsolator #LVDS #AnalogDevices #HighSpeedInterface #GalvanicIsolation #LVDSIsolator #DigitalIsolation #IndustrialElectronics #HighSpeedData #SERDES #SignalIntegrity #EmbeddedSystems #ElectronicsDesign #InterfaceICs