Pulse induction metal detector using an Arduino Nano, TC4420-driven IRF3205 coil switch, TL072 analog gain stages, LM393 detection comparator, 12V input power, and buzzer alert, optimized for low-noise sensing and separated analog/power grounds.

A simple voltage divider to showcase how to make parts. A voltage divider is a simple circuit which turns a large voltage into a smaller one. Using just two series resistors and an input voltage, we can create an output voltage that is a fraction of the input. Voltage dividers are one of the most fundamental circuits in electronics.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

This project involves designing a portable device that can inject a 1kHz sine wave signal into a 100V audio line to detect short circuits. The device should be compact (around the size of a smartphone) and include LED indicators to show the status: a green LED for normal operation and a red LED for short-circuit detection. The device will be powered either by a switching power supply or rechargeable batteries.

The NTZD3154N, manufactured by ON Semiconductor, is a dual N-channel MOSFET designed for small signal applications. This component boasts a low RDS(on) for improved system efficiency and a low threshold voltage, making it highly suitable for applications such as load/power switches, power supply converter circuits, and battery management in devices like cell phones, digital cameras, and PDAs. The NTZD3154N features a compact 1.6 x 1.6 mm footprint and an ESD-protected gate, ensuring robust performance in constrained spaces. With a maximum drain-to-source voltage (VDSS) of 20 V and a continuous drain current of up to 540 mA (at 25°C), the NTZD3154N is optimized for efficient power management. The device is also compliant with RoHS standards, being Pb-Free and Halogen Free/BFR Free, ensuring environmentally friendly usage. The component is available in the SOT-563-6 package, identified by the specific device code "TV" and a date code marking.

Compact through-hole ESP32 YoRadio perfboard-style carrier with connectors, headers, power switching, LEDs, and audio amplifier section.

MCU-Controlled 7-Port USB 3.0/2.0 Hub with Dual Extra USB 3.0 Downstream Ports, Per-Port 900mA Power Switches, High-Speed TVS/CMC Protection, Controlled Line Impedance (85Ω SS / 90Ω USB2), and ≥6.3A Total Current Output

This project is focused on designing a highly efficient PCB for a switching power supply using a robust selection of electronic components. Our design leverages a flyback topology featuring a ferrite transformer (options EE25 or EE33), a PWM integrated circuit (TL494, SG3525, or UC3842), and a power MOSFET (IRF840 or a similar alternative) for effective high-voltage switching. Fast and reliable rectification is ensured by using a Schottky diode (MBR20100 or FR107) along with a rectifier bridge built from four 1N4007 diodes or a dedicated 4A bridge. Key stabilization and regulation components include the TL431 reference regulator and a Zener diode for precise voltage control in critical areas. For input and output filtering, the design incorporates electrolytic capacitors (470 µF, 25 V for output and 400 V, 100 µF for input) and ceramic capacitors (ranging from 1 nF to 100 nF) to limit high-frequency noise. Additional safety and operational features are provided by an NTC (soft-start thermistor) to prevent current spikes, various resistors (from 1 Ω to 100kΩ), an optocoupler (PC817) for signal isolation, a switch, and a protection fuse. Before moving forward with a finalized PCB layout and schematic details, we need to clarify a few design choices: 1. Transformer Choice: Would you prefer using the EE25 or the EE33 ferrite transformer variant as the heart of the switching power supply design? This detailed approach ensures that the power supply not only meets rigorous performance and safety standards but also supports a reliable and scalable solution for various electronic applications. #PCBDesign #SwitchingPowerSupply #Electronics #SMPS #PowerElectronics #FlybackConverter #CircuitDesign #ElectronicsComponents

The TDK FG series of Multilayer Ceramic Capacitors (MLCC) with dipped radial leads are designed for commercial-grade applications, offering a halogen-free and RoHS compliant solution. These capacitors are available with lead pitches of 5.0mm and 2.5mm, and come in various dimensions ranging from 4.0x5.5mm to 8.5x11.0mm. The FG series includes types such as FG28, FG24, FG26, FG20, FG22, FG23 for the 5.0mm lead pitch, and FG18, FG14, FG16, FG11 for the 2.5mm lead pitch. These capacitors feature a voltage rating of 10V to 630V and a capacitance range from 1pF to 47uF. They are suitable for applications including noise reduction in motors, bypass and smoothing capacitors for switching power sources, snubber circuits, and PFC input filters. The components are characterized by various temperature coefficients including C0G, X5R, X7R, X7S, and X7T, with operating temperatures ranging from -55°C to +125°C. The FG series is available in both bulk and taped packaging styles, designed to meet the needs of general electronic equipment such as AV equipment, telecommunications, home appliances, and industrial robots.

In this project a +18V and a -18V dual power supply is implemented.

This project is intended to validate automatic or prioritized input source selection (if any), or test performance across variable solar conditions using the simulation and code tool

An I2C extension board with LTC4311 bus accelerator and shielded ethernet port. This board is for the target side. With proper controller side hardware and an SSTP ethernet cable, the board provides robust i2c communication over 10ft(could be longer, haven't tested it yet) with a bitrate of 400kHz under a noisy environment( near motors, power cables, switches, etc). The breakout board receives power from the controller side and can power i2c device. The board also supports drdy trigger, which is available on many i2c sensors. #project #I2C #shielded #robust #ltc4311 #long-distance

An I2C extension shield with 6 shielded ethernet ports and a TCA9548 breakout board. This board is for the target side, any microcontroller with a standard Arduino header can use it. With proper target side hardware and an SSTP ethernet cable, the board provides robust i2c communication over 10ft(could be longer, haven't tested it yet) with a bitrate of 400kHz under a noisy environment( near motors, power cables, switches, etc). The shield board provides power to the target side and can power the i2c device. The board also supports drdy trigger, which is available on many i2c sensors. The TCA9548 breakout board is for a scenario in which all of your i2c devices have the same address. #Arduino #Uno #Shield #Template #project-template #project

The NTTFS4C06N, manufactured by ON Semiconductor, is a high-performance, single N-Channel Power MOSFET designed for applications requiring efficient switching and low conduction losses. This MOSFET is rated for a maximum drain-to-source voltage (VDSS) of 30 V and can handle continuous drain currents up to 67 A. Key features include a low RDS(on) of 4.2 mΩ at VGS = 10 V and 6.1 mΩ at VGS = 4.5 V, which minimizes conduction losses, and optimized gate charge characteristics that reduce switching losses. Additionally, the component boasts low capacitance to minimize driver losses, making it ideal for use in DC-DC converters, power load switches, and notebook battery management systems. The device is RoHS compliant, Pb-free, and halogen-free, ensuring environmentally friendly compliance. The NTTFS4C06N is available in a compact WDFN8 package, making it suitable for high-density circuit designs.

The NTTFS4C05N is an advanced N-Channel MOSFET designed by ON Semiconductor, optimized for high-efficiency power management applications. This MOSFET features a low RDS(on) to minimize conduction losses, low capacitance to reduce driver losses, and an optimized gate charge for minimal switching losses. It operates at a maximum drain-to-source voltage (VDSS) of 30V and can handle continuous drain currents up to 75A. The device is available in a compact WDFN8 package and is suitable for use in DC-DC converters, power load switches, and notebook battery management systems. The component is Pb-Free, Halogen Free/BFR Free, and RoHS compliant, ensuring it meets global environmental standards. Additionally, the NTTFS4C05N offers robust performance with a maximum power dissipation of 33W at a case temperature of 25°C, and it can withstand pulsed drain currents up to 174A. It also features a gate threshold voltage range of 1.3V to 2.2V and boasts fast switching characteristics with turn-on and turn-off delay times as low as 2ns and 8ns, respectively.

The Vishay Siliconix Si2324DS is a high-performance N-Channel MOSFET designed for applications requiring efficient switching and power management. This component, housed in a compact TO-236 (SOT-23) package, features a drain-source voltage (V_DS) of 100V and a continuous drain current (I_D) of up to 2.3A at 25°C. The Si2324DS offers low on-resistance (R_DS(on)) values of 0.234Ω at a gate-source voltage (V_GS) of 10V, ensuring minimal power loss and high efficiency. With a typical gate charge (Q_g) of 2.9nC, it is suitable for high-speed switching applications. The MOSFET is fully Rg and UIS tested, ensuring reliability and robustness in demanding environments. This component is ideal for use in DC/DC converters, load switches, and LED backlighting in LCD TVs, making it a versatile choice for various power management applications. The Si2324DS is lead-free, halogen-free, and RoHS compliant, aligning with environmental and safety standards.

The NIKO-SEM PB600BA is an N-Channel Enhancement Mode Field Effect Transistor (FET) housed in a PDFN 2x2S package, designed for applications requiring high efficiency and low on-resistance. This halogen-free and lead-free component boasts a Drain-Source Voltage (V_DS) of 30V and a Gate-Source Voltage (V_GS) of ±20V. With a maximum continuous drain current of 9A at 25°C and a pulsed drain current capability of up to 27A, it is well-suited for high-current applications. The device features a low R_DS(on) of 12mΩ at V_GS = 10V, ensuring minimal power loss and heat generation. The PB600BA also exhibits excellent thermal performance with a junction-to-ambient thermal resistance (R_θJA) of 71.7°C/W. Additional characteristics include a gate threshold voltage (V_GS(th)) range of 1.3V to 2.5V, a total gate charge (Q_g) of 15nC at V_GS = 10V, and a maximum power dissipation of 1.7W at 25°C. This FET is ideal for use in power management, load switching, and other high-efficiency electronic circuits.

A multimedia controller with 4 programmable switches. Consisting of one rotary encoder and three standard Cherry MX switches. USB-A for power and data. An LED for power indicator.

The NTK3134N from ON Semiconductor is a high-performance, single N-Channel MOSFET designed for power and interface switching applications in ultra-small portable electronics. Packaged in a compact SOT-723 form factor, which is 44% smaller in footprint and 38% thinner than the SC89, this MOSFET features a low RDS(on) for efficient load switching. It operates at low logic level gate drives, with a maximum drain-to-source voltage (VDSS) of 20V and a continuous drain current (ID) of up to 890mA at 25°C. The component supports pulsed drain currents up to 1.8A and boasts ESD protection. The NTK3134N is also Pb-Free, Halogen Free/BFR Free, and RoHS Compliant, making it an environmentally friendly choice for designers. Key applications include load/power switching, interface switching, logic level shifting, and battery management.

Welcome to your new project. Imagine what you can build here.

Low-voltage logic-only CERILUME Phase 1 LED controller using an Arduino Nano ESP32 plug-in module, 5V logic level shifting for WS2812/SK6812 data, microphone input header, and labeled test pads. LED power distribution and high-current switching are intentionally out of scope.

Beginner-prototype solar bee monitor central controller using a plug-in 38-pin ESP32 NodeMCU-32, breakout sensor interfaces, switched camera and gate power, RS-485, monitored rails, and isolated safety-critical 2S charging/protection interfaces pending fully verified implementations.

Multi-subsystem ESP32-S3 coffee maker/alarm controller board for a Coffee Waker appliance. The design uses an ESP32-S3-WROOM-1-N8R8 module as the main Wi-Fi/Bluetooth MCU, with USB-C 2.0 device connectivity through a USB4105-GF-A connector, 5.1 kΩ CC pull-downs, and USBLC6-2SC6 ESD protection on the USB D+/D− pair. Power architecture includes a 12 V input on a JST VH B4P connector, a TPS62932 buck regulator generating the 5 V rail, a TLV1117LV33 3.3 V LDO for MCU/logic power, and TPS22919 load switches for controlled 3.3 V/5 V peripheral rails. Functional blocks include an NAU7802 load-cell ADC on I2C with two differential load-cell channels, a MAX98357A I2S audio amplifier/DAC with speaker/output filtering, a microSD socket on SDIO, I2C/test headers, UART/programming header, and auxiliary JST VH connectors for wake-light or external loads. The high-voltage section includes 120 VAC input/output screw terminals, a 5 V SPST-NO relay rated 15 A / 240 VAC max, a 1 A fuse, MOV surge suppression, diode snubber, and a dedicated heater output terminal.

Low-voltage logic-only CERILUME Phase 1 LED controller using an Arduino Nano ESP32 plug-in module, 5V logic level shifting for WS2812/SK6812 data, microphone input header, and labeled test pads. LED power distribution and high-current switching are intentionally out of scope.