Part Datasheet Review


I’ll inspect the part metadata and existing symbol/footprint, look up the official datasheet if needed, update the Datasheet property, then cross-check pins and summarize any mismatches.
I found this is a 6-pad power-converter part project with terminals for VIN, GND/0V, and +VOUT; I’m checking the official CUI datasheet next.
I verified the Bel/CUI datasheet, updated the exposed terminal properties with the official datasheet URL and pin descriptions, and found one review flag around NC pin 11 handling.
Created a project doc

VAQE6W-Q24-S24-D Part Review

View Document

Reviewed available Flux part information against the official Bel/CUI datasheet and product page for VAQE6W-Q24-S24-D. Project: VAQE6W-Q24-S...
Completed the VAQE6W-Q24-S24-D review, added the official Bel/CUI datasheet URL to the exposed terminal properties, and updated pin descriptions/types from the datasheet. Full details are in VAQE6W-Q24-S24-D Part Review.
Open items:
  • Main flag: footprint correctly includes physical NC pin 11, but the symbol does not expose an explicit NC terminal.
  • Lifecycle should be treated as NRND per Bel’s product page.
Suggested next steps:
  1. Add/mark pin 11 as explicit NC if you want the part to pass stricter symbol-vs-footprint review.
  2. Add lifecycle/status metadata as NRND if that property is available in your library workflow.
Fix NC and review
Add NC pin
Set lifecycle metadata
Run part review
Check manufacturability

VAQE6W-Q24-S24-D Part Review
Scope
Reviewed available Flux part information against the official Bel/CUI datasheet and product page for VAQE6W-Q24-S24-D.
Key Datasheet / Product Specs

Table


FieldValue
Manufacturer / brandCUI Inc / Bel
MPNVAQE6W-Q24-S24-D
SeriesVAQE6W-D
FunctionIsolated regulated DC-DC converter module
Mounting / packageThrough-hole DIP24 / board-mount module
Input voltage24 V nominal; 9–36 VDC operating range
OutputSingle +24 VDC isolated output
Output current0–250 mA
Output power6 W max
Typical efficiency87% for this model
Ripple/noise120 mVp-p max, measured per datasheet conditions
Isolation voltage3000 VDC input-to-output, 1 minute at 1 mA
Operating temperature-40 to +85 °C, see derating curve
Switching frequency300 kHz typical at full load
No-load input power0.12 W
ProtectionUV/OV input protection, over-current protection, continuous self-recovering short-circuit protection
Recommended simple external capacitorsCin 100 µF, Cout 10 µF for 24 V input single-output model
EMC recommended componentsFuse per input current; MOV S20K30; C0 1000 µF/50 V; C1 1 µF/50 V; C3 10 µF; LDM1 4.7 µF; CY1/CY2 1 nF/3 kV
Safety/complianceUL/cUL product page; RoHS; datasheet lists EN/BS EN 62368-1 feature set and note that this exact model is not CE certified
LifecycleBel product page marks part NRND / Not Recommended for New Design
Body dimensions31.60 × 20.30 × 10.20 mm
Pin diameter0.50 mm nominal, ±0.10 mm tolerance
Recommended PCB grid2.54 × 2.54 mm grid; Ø1.00 mm holes
Weight13 g
Datasheet Pinout vs Current Symbol
For the single-output VAQE6W-Q24-S24-D model:

Table


Datasheet pinDatasheet functionCurrent symbol terminalReview result
2GNDGND, pin 2Match; updated Pin Type to Ground and added description
3GNDGND, pin 3Match; updated Pin Type to Ground and added description
9No PinNot presentCorrect: no physical pin expected
11NCNot exposed as terminalFlag: footprint includes pad 11 but symbol omits explicit NC terminal
14+Vout+VOUT, pin 14Match; updated Pin Type to Power Out and added description
160V0V, pin 16Match; updated Pin Type to Ground and added description
22VinVIN, pin 22Match; updated Pin Type to Power In and added description
23VinVIN, pin 23Match; updated Pin Type to Power In and added description
Footprint Cross-check
Current KiCad footprint contains through-hole pads:

Table


Footprint padCurrent coordinateDatasheet expectationReview result
2(0.00, 0.00) mmPopulated pin 2, GNDMatch
3(2.54, 0.00) mmPopulated pin 3, GNDMatch
11(22.86, 0.00) mmPopulated pin 11, NCMatch mechanically; symbol handling flagged
14(22.86, -15.24) mmPopulated pin 14, +VoutMatch, y-axis sign is footprint convention
16(17.78, -15.24) mmPopulated pin 16, 0VMatch, y-axis sign is footprint convention
22(2.54, -15.24) mmPopulated pin 22, VinMatch, y-axis sign is footprint convention
23(0.00, -15.24) mmPopulated pin 23, VinMatch, y-axis sign is footprint convention
9Not presentNo PinMatch
Footprint body outline spans x = -4.37 to 27.23 mm and y = -17.77 to 2.53 mm, giving 31.60 × 20.30 mm, which matches the datasheet body dimensions.
Pad size is 1.508 mm with 1.0 mm drill, giving about 0.254 mm annular ring. This is plausible and compatible with the datasheet's Ø1.00 mm hole recommendation; no mismatch flagged.
Updates Made
Added the official Bel/CUI datasheet URL and datasheet-derived pin descriptions to the exposed symbol terminals:
  • Pin 2 GND: input return / input GND
  • Pin 3 GND: input return / input GND
  • Pin 22 VIN: positive DC input, 9–36 VDC
  • Pin 23 VIN: positive DC input, 9–36 VDC
  • Pin 14 +VOUT: +24 V regulated isolated output, 0–250 mA
  • Pin 16 0V: isolated output return / 0V
Mismatches / Flags
  1. Symbol omits physical NC pin 11
    • Datasheet: pin 11 is a physical pin marked NC.
    • Footprint: includes pad 11, which is mechanically correct.
    • Symbol: does not expose pin 11 as an NC terminal.
    • Risk: Flux part review may flag pad/terminal mismatch, and users may not see that physical pad 11 is intentionally unconnected.
    • Suggested fix: add an explicit pin 11 NC terminal marked no-connect, or mark pad 11 as an intentionally excluded/unconnected physical pad if that is the preferred library convention.
  2. Lifecycle metadata should be NRND
    • Bel product page states the part is Not Recommended for New Design and availability is limited to remaining distribution stock.
    • If lifecycle/status metadata exists elsewhere for this part, it should reflect NRND.
  3. Datasheet model-table CE footnote
    • The datasheet line for this model includes footnote 3, which states the model is not CE certified.
    • Product page still lists UL/cUL and RoHS. Avoid marking CE compliance for this exact MPN unless another source supersedes the datasheet.
Overall Result
The functional symbol pins and footprint geometry are substantially correct for VAQE6W-Q24-S24-D. The main library-quality issue is NC pin 11 representation: the footprint correctly includes the NC physical pad, but the symbol does not explicitly expose or document it as NC.
  • Scope

  • Key Datasheet / Product Specs

  • Datasheet Pinout vs Current Symbol

  • Footprint Cross-check

  • Updates Made

  • Mismatches / Flags

  • Overall Result