Part review: CONN_040P_000C_1 / JAE TX25A-80P-LT-H1E
Sources checked
Datasheet property update
The project did not show a Datasheet URL in the project properties. I added:
Datasheet URL = https://products.jae.com/gl/en/connectors/category/board-to-board/tx24a-tx25a/tx25a-80p-lt-h1e/
Flux reported this as a non-standard project property name, but it is now present on the part project.
Key official specs for the identified part
- Manufacturer: JAE / Japan Aviation Electronics Industry, Ltd.
- MPN: TX25A-80P-LT-H1E
- Series: TX24A/TX25A
- Category: board-to-board connector
- Style: plug, right-angle / horizontal connection
- Positions: 80
- Rows: 2
- Pitch: 1.27 mm
- Termination / mount: through-hole solder
- Rated current: 1 A
- Operating temperature: -40 °C to +85 °C
- Mating connector: TX24A-80R-LT-H1E
- Contact finish: gold over nickel contact area
- Insulator material: glass-filled PBT
- Board mounting height: 9 mm
- JAE drawing number: SJ116436
- JAE specification number: JACS-11111
- Lifecycle: active/current production per JAE/distributor sources
Existing Flux part information reviewed
Project-level properties found:
- Part Type:
Connectors
- Designator Prefix:
J
- Manufacturer Part Number:
CONN_040P_000C_1
Schematic symbol:
- 80 terminal components exist, numbered 1 through 80.
- Each terminal has
Pin Number equal to its designator number.
- Pin Type is
Unspecified for all pins.
- No per-pin descriptions were present.
- No nets are present in the part project.
Footprint/layout:
- 80 numbered signal pads are present, 1 through 80.
- 2 additional mounting pads are present, numbered 81 and 82.
- Footprint silkscreen contains
CONN_TX25A-80P-LT-H1E_JAE, strongly identifying the footprint as JAE TX25A-80P-LT-H1E.
- Footprint outline/silkscreen shows a long right-angle connector body and pin-1/polarity markers, consistent with the identified connector family.
- Layout text credits Accelerated Designs, suggesting the footprint was imported from an external CAD library.
Cross-check results
Matches
- Footprint text matches official JAE MPN TX25A-80P-LT-H1E.
- Footprint has 80 signal pads, matching the official 80-position connector.
- Footprint includes 2 mechanical/mounting pads, plausible for this through-hole board-to-board connector.
- Designator prefix
J is appropriate for a connector.
- Part type
Connectors is broadly correct.
Mismatches / issues to fix
- Project MPN mismatch: project
Manufacturer Part Number is CONN_040P_000C_1, but the footprint and official source identify TX25A-80P-LT-H1E. CONN_040P_000C_1 appears to be an internal/generated name, not an official manufacturer MPN.
- Manufacturer missing: no
Manufacturer Name project property was found. It should be JAE or Japan Aviation Electronics Industry, Ltd..
- Description too generic: project name/description remain
CONN_040P_000C_1; they do not describe the part as an 80-position 1.27 mm right-angle board-to-board plug.
- Pin descriptions missing: all 80 terminals lack descriptions. For this connector, generic signal-contact descriptions such as
Contact 1 … Contact 80 would be acceptable unless a mating/application-specific pin assignment is intended.
- Pin type unspecified: all terminals are
Unspecified; passive connector contacts are typically better represented as Passive or Signal depending on Flux convention.
- Symbol placement issue: terminals 40 through 80, and several others, share the same symbol pin position
x=-35.5, y=-278.5; this likely collapses many pins on top of each other in the schematic symbol.
- Pin count naming conflict: the project name
CONN_040P_000C_1 suggests 40 positions, but the actual part/footprint/schematic is 80 positions. This is misleading and should be renamed.
Confidence and limitations
- High confidence that the existing footprint is intended for JAE TX25A-80P-LT-H1E because the footprint silkscreen explicitly contains that exact MPN.
- I could not directly scrape the mirrored PDF drawing during this review, so detailed pad-hole diameters and exact plated-through-hole dimensions were not independently verified in-tool. The footprint should be checked against JAE drawing SJ116436 before release/manufacturing.
Recommended cleanup
- Change
Manufacturer Part Number to TX25A-80P-LT-H1E.
- Add
Manufacturer Name = JAE.
- Rename project to
TX25A-80P-LT-H1E and update description to JAE TX25A/TX24A series 80-position 1.27 mm pitch right-angle through-hole board-to-board plug.
- Add connector properties: 80 positions, 2 rows, 1.27 mm pitch, plug, through-hole, right-angle.
- Update terminal pin types/descriptions and fix the overlapping symbol pin positions.
- Verify pad drill/diameter and mounting holes against JAE drawing SJ116436 when the official drawing PDF is available.