Part Datasheet Review and Validation


Completed the TC358768AXBG review and saved the full findings in Part Datasheet Review: TC358768AXBG. The project already had an official Toshiba datasheet URL set; MPN, package, 72-ball pinout, and 9×9 center-omitted VFBGA footprint check out.
Open items:
  • Pin Type is still Unspecified on all terminals.
  • Pin Description fields are not populated.
  • Footprint pad/mask/paste details should be confirmed against assembler/Toshiba land-pattern guidance before fab.
Suggested next steps:
  1. Populate Pin Type and Pin Description properties from the datasheet.
  2. Normalize the description to “RGB / parallel port to MIPI DSI display bridge, 72-ball 0.4 mm VFBGA.”
  3. Run a manufacturing-focused footprint/land-pattern review.
Populate the Pin Type and Pin Description properties from the Toshiba datasheet.
I’ll apply the Toshiba datasheet pin functions to all 72 terminals, then re-read the symbol to verify the Pin Type and Pin Description updates.
I found the official functional signal list; I’m now updating every terminal with datasheet-derived electrical type and description.
Populated Pin Type and Pin Description for all 72 TC358768AXBG terminals from the Toshiba functional signal list, including power, ground, parallel RGB input, MIPI DSI PHY, I2C/SPI, GPIO, reset, clock, and sync pins. Verified afterward that the updated properties are present across the symbol.
Open items:
  • None for this request.
Suggested next steps:
  1. Run ERC/property checks now that pin types are populated.
  2. Add Bus Group / differential-pair metadata for the MIPI DSI lanes.
  3. Do a manufacturing-focused review of the 0.4 mm VFBGA footprint.
Metadata and checks
Run ERC check
Add MIPI metadata
Review VFBGA footprint
Update review file

Part Datasheet Review: TC358768AXBG
Date: 2026-07-06
Reviewed Source
The project already had an official Toshiba Datasheet URL set, so no Datasheet URL property update was required.
Current Project Metadata

Table


FieldCurrent project valueDatasheet / official source check
Manufacturer Part NumberTC358768AXBGMatches
Manufacturer NameToshibaMatches Toshiba Electronic Devices & Storage Corporation
DescriptionDisplay Interface Bridge 72-Pin VFBGA - BulkFunction and pin count match; description is acceptable but could be more specific as RGB-to-MIPI DSI bridge
Part TypeIntegrated CircuitsAcceptable
Package or Case CodeVFBGAMatches package family
Pads / terminals72Matches BGA72
Designator PrefixICAppropriate
Key Datasheet Specs

Table


ParameterDatasheet value
FunctionRGB / parallel port to MIPI DSI display bridge
Supported resolutionUp to WUXGA 1920 × 1200, 60 fps, 24 bpp
DSI lanes1, 2, 3, or 4 data lanes plus clock lane
DSI speedUp to 1 Gbps per data lane
RGB input24-bit parallel RGB, RGB888/666/565
Pixel clockUp to 166 MHz input clock
REFCLK6 MHz to 40 MHz input
Control interfaceI2C when CS = L; SPI when CS = H
I2C speed100 kHz, 400 kHz, special mode 1 MHz
SPI speedUp to 25 MHz
Core supply VDDC1.1–1.3 V, typ 1.2 V
MIPI supply VDD_MIPI1.1–1.3 V, typ 1.2 V
I/O supply VDDIO1.65–1.95 V or 3.0–3.6 V
PackageP-VFBGA72-0404-0.40A3
Body size4.5 mm × 4.5 mm
Pitch0.4 mm
Package height1.0 mm max
Typical package weight32 mg
Symbol / Pin Cross-Check
The schematic represents the part as 72 terminal components, each with a Pin Number property. The symbol pin numbers were checked against the Toshiba pin layout.
Result
  • Pin count matches: 72 terminals.
  • No duplicate pin numbers found in the inspected terminal list.
  • The functional pin mapping matches the official Toshiba pin layout, including the 9 × 9 array with center 3 × 3 balls omitted.
  • The MIPI/center-area pins are correctly placed at the outer right side of rows D/E/F:
    • D7 = VSS
    • D8 = MIPI_D2P
    • D9 = MIPI_D2N
    • E7 = VDD_MIPI
    • E8 = MIPI_CP
    • E9 = MIPI_CN
    • F7 = VSS
    • F8 = MIPI_D1P
    • F9 = MIPI_D1N
A datasheet OCR extraction initially returned a conflicting table placing these signals at D5/D6/E4/E5/E6/F5/F6. That conflicts with the package depopulation pattern and was independently checked as an OCR/table-parsing artifact. The current project mapping is the correct Toshiba mapping.
Footprint Cross-Check
Current footprint asset: BGA72C40P9X9_450X450X100.kicad_mod
Footprint observations
  • 9 × 9 grid envelope.
  • Center 3 × 3 positions D4–D6, E4–E6, F4–F6 are omitted, leaving 72 pads.
  • Pad pitch in the KiCad footprint is 0.4 mm.
  • Body/fab outline is 4.5 mm × 4.5 mm.
  • Pad diameter is 0.20 mm circular.
  • Height encoded in footprint name is 1.00 mm, matching datasheet max package height.
Result
The footprint is appropriate in concept for Toshiba package P-VFBGA72-0404-0.40A3. Pad diameter and solder-mask/paste strategy should still be checked against the PCB assembler’s 0.4 mm BGA capability and Toshiba’s recommended land pattern if manufacturing-critical.
Mismatches / Issues Flagged

Table


SeverityItemDetailRecommended action
MediumPin Type propertiesAll 72 symbol terminals currently show Pin Type = Unspecified. Datasheet provides functional I/O categories such as input, open-drain, bidirectional GPIO, power, and ground.Update terminal Pin Type values for better ERC and documentation.
MediumPin descriptions missingTerminals do not appear to have Pin Description properties populated.Add datasheet-derived Pin Description values for each terminal or at least each functional group.
LowPart Type wordingProject property says Integrated Circuits.Acceptable; optionally normalize to Integrated Circuit if desired.
LowDescription specificityCurrent description identifies display interface bridge and package, but not RGB-to-MIPI DSI.Optionally revise description to “RGB / parallel port to MIPI DSI display bridge, 72-ball 0.4 mm VFBGA.”
Low / manufacturing checkFootprint land patternFootprint geometry matches package concept: 72 balls, 0.4 mm pitch, 4.5 mm body, center 3 × 3 omitted. Exact land-pattern tolerances were not fully extracted beyond pad size/pitch/body.Before fab, confirm 0.20 mm pads, mask, paste, and via escape rules with assembler/Toshiba land-pattern guidance.
Overall Verdict
The MPN, manufacturer, package family, pin count, schematic pin numbering, and footprint topology match the official Toshiba TC358768AXBG datasheet. The main quality gaps are metadata/documentation rather than pinout correctness: terminal Pin Type is Unspecified across the symbol and datasheet-derived Pin Description fields are not populated.
  • Reviewed Source

  • Current Project Metadata

  • Key Datasheet Specs

  • Symbol / Pin Cross-Check

  • Result

  • Footprint Cross-Check

  • Footprint observations

  • Result

  • Mismatches / Issues Flagged

  • Overall Verdict