Part Datasheet Review and Validation

flux

Grouped all 48 pins by primary datasheet function, with each physical pin assigned to exactly one Pin Group/Section; I also populated Pin Type and concise Pin Description values.
Open items:
  • Pin 29 is still named GND_2 in the symbol, but its description now notes it is AGND per datasheet.
  • Some custom group names were accepted but produced autocomplete warnings because they are more specific than Flux’s default suggestions.
Suggested next steps:
  1. Rename GND_2 to AGND.
  2. Optionally normalize group names to default-style labels like PORTA, PORTB, Analog, Clock, Debug.
  3. Re-run component review checks after renaming.
A

adrian95

  • Make the functional group more general.
  • Add a Section property to all pins, and apply the same value used in the Pin Group property to each pin's Section property.

flux

I’ll normalize the pin groups to broader categories and set every pin’s Section to exactly match its Pin Group.

flux

Updated all 48 pins to use broader functional groups and verified every pin now has a Section property matching its Pin Group.
Open items:
  • PF6 uses Reset; Flux accepted it, but it produced an autocomplete warning because Reset is not one of the preferred Pin Group suggestions.
  • GND_2 is still named that way, though its description notes it is AGND.
Suggested next steps:
  1. Rename GND_2 to AGND.
  2. If you want zero property warnings, change PF6 from Reset to Control or Debug.
Rename and review
Rename AGND pin
Use Control for PF6
Run review checks
Check pin groups
Sign up to send

Files

Pins

Symbol

Layout

3D View

AVR128DB48-I/PT