STM32 Schematic Layout
Thought for 11 mins 36 sec
Thought for 5 sec
Referenced guidance.
Thought for 10 sec
Thought for 6 sec
Awaiting 1 task
"STM32 RTK LiDAR Schematic Layout" completed.
Thought for 4 mins 9 sec
Thought for 7 sec
2/2 Review readability and verify that components, values, nets, and pin connections are unchanged.
Draft all functional blocks and arrange the full schematic sheet without changing connectivity.
Review readability and verify that components, values, nets, and pin connections are unchanged.
Thought for 11 sec
Awaiting 1 task
"Schematic Layout Review" completed.
Thought for 2 mins 24 sec
Thought for 11 sec
Thought for 7 sec
Awaiting 1 task
"STM32 RTK LiDAR Schematic Layout" completed.
Thought for 50 sec
Arranged all 74 components into eight readable functional blocks, with local wires, inter-block net labels, and cleaned-up power symbols and label spacing. Verified that all 47 nets, component values, and pin connections are unchanged; no PCB edits were made.
Three clear, non-junction UART crossings remain. Pre-existing electrical-check findings were left untouched; electrical review is the next step before PCB layout.
