BQ25185 Charger Topology


Fase 1 del esquema quedó construida por bloques; ahora verifico netlist/BOM/ERC, especialmente BQ25185 SYS/CE y restricciones DNP/contactos de relé.
Verificación preliminar confirma que AIRTAG_CHG_SYS contiene sólo U3.SYS y C5.P1, y que CE está en AIRTAG_PACK_NEG/GND, no en SYS; ahora cierro reporte y ERC/lista de errores.
Detecté un error real: U4.V− estaba flotante; lo corrijo conectándolo al resistor R8 como red V− de BQ29700. Mantendré PS/SYNC de U8 como decisión abierta, no lo ataré arbitrariamente.
Corrección U4.V− aplicada; ejecuto la verificación final de Fase 1 y actualizaré el reporte del proyecto.
Fase 1 quedó ejecutada y detenida: construí el esquema sombra por bloques, sin crear PCB, placement físico, routing, antena ni conexiones a máquina/carga. Verifiqué que AIRTAG_CHG_SYS = U3.SYS + C5.1 solamente, y que U3.CE está a AIRTAG_PACK_NEG/GND, no a SYS.
Actualicé el reporte completo con BOM, conectividad, tabla pin-a-pin BQ25185, huecos de librería, ERC y decisiones abiertas: Shadow Build Report — Brand NewDay.
Quedan errores ERC intencionales/abiertos de Fase 1: U8 PS/SYNC sin política, AIRTAG_CELL_POS sin fuente/batería definida, RF abierto sin antena/matching, y redes LM5069 UVLO/OVLO/TIMER/PWRSET sin valores.
Fix ERC and gaps
Replace proxy parts
Review schematic only
Set PS/SYNC policy
Prepare Phase 2 plan

Schematic of Brand NewDay Shadow PCB
R2
Resistance
5.1kΩ
R1
Resistance
5.1kΩ
J1
Schematic Not Placed

The schematic has not been placed. Flux can arrange symbols and draw wires to be more readable. This takes about 10–60 mins.

Brand NewDay Shadow PCB