BQ25185 Charger Topology
Thought for 9 sec
Leeré ambos adjuntos, reconciliaré sus instrucciones y aplicaré únicamente el alcance autorizado al proyecto BENCH_ONLY actual.
Thought for 46 sec
Ambos adjuntos son idénticos. Revisaré exclusivamente los 21 MPN faltantes, aprobaré sólo pasivos estándar con requisitos cerrados y aplicaré únicamente metadatos MPN/LCSC; las dependencias de LM5069, CC1354 y convertidores permanecerán bloqueadas si no hay evidencia suficiente. Progreso: 0%.
Worked for 4 mins 38 sec
Fase 10 no pudo ejecutarse porque no quedan ACUs disponibles. No se modificó el proyecto.
Completado:
- Se reconciliaron ambos adjuntos; son idénticos.
- Se definió el alcance exacto de los 21 MPN faltantes y sus criterios de aprobación.
Pendiente:
- Investigación oficial y clasificación individual.
- Aplicación exclusiva de metadatos aprobados.
- Revisión Manufacturer Part Number antes/después.
- Reporte final Fase 10.
BENCH_ONLY / NOT FOR FABRICATION / NOT FOR ENERGIZATION.
Listar 21 MPN
Explicar ACUs
Criterios sin cambios
Refine this doc
Ask about this doc
Component Qualification Manifest — Brand NewDay Shadow PCB
Status: BENCH_ONLY / NOT FOR FABRICATION / NOT FOR ENERGIZATION
Scope: Component library-gap qualification manifest only. No schematic, PCB, nets, placement, routing, RF/antenna geometry, Gerbers, fabrication output, or machine/load connections were modified.
Scope: Component library-gap qualification manifest only. No schematic, PCB, nets, placement, routing, RF/antenna geometry, Gerbers, fabrication output, or machine/load connections were modified.
Qualification Rules
- Use the exact MPNs from the Brand NewDay briefs.
- Use only official manufacturer datasheet/package evidence for equivalence decisions.
- If pin/function/package equivalence is not verified from official datasheets, status is NO SUBSTITUTE / LIBRARY GAP.
- Existing schematic proxy parts are documentation placeholders only unless marked pin-compatible by official evidence.
Component Qualification Table
Table
| Reference | Exact MPN required | Official package / orderable evidence | Current Flux proxy / placeholder | Symbol status | Footprint status | Proxy pin-a-pin compatibility | Qualification status | Action necessary |
|---|---|---|---|---|---|---|---|---|
| J1 | DX07S016JA3R1500, LCSC C3197625 | JAE SJ122205 is the authoritative connector mechanical drawing/PCB land pattern. SJ122206 is packaging/reel documentation only. | DX07S016JA1R1500 | UNSAFE_PROXY | Proxy footprint only; exact footprint missing | Not verified and not approved; JA1 must not substitute for JA3 | NO SUBSTITUTE / J1_LIBRARY_GAP / BLOCKS_PCB | CUSTOM_OR_IMPORTED_FOOTPRINT_REQUIRED. Validate all pads, pin numbering, shell tabs, holes/slots, cutout, board-edge datum, orientation and permitted PCB thickness against SJ122205, then compare 1:1 with EasyEDA C3197625. |
| U9 | CC1354P106T0RGZR | TI CC1354P10 datasheet/package addendum: CC1354P106T0RGZR, active production, RGZ VQFN-48, 7 mm × 7 mm, 0.5 mm pitch, large T&R. | CC1352P1F3RGZR | Proxy symbol is non-final | Proxy footprint is VQFN-48-family only, not qualified for exact pinout | Not compatible unless every signal is remapped from CC1354P106T0RGZR official pin table; proxy is different MCU | NO SUBSTITUTE / LIBRARY GAP | Create/import exact CC1354P106T0RGZR component using TI CC1354P10 datasheet pin diagram/signal table and RGZ land pattern. Replace proxy before any final schematic/layout. |
| U10 | MCP41HV51-503E/ST | Microchip MCP41HVX1 datasheet: MCP41HV51 is SPI digital potentiometer; -503 = 50 kΩ; /ST = TSSOP-14; extended temp E grade. | MCP45HV51-ST | Proxy symbol is wrong interface family | TSSOP-14 physical class, but exact pin functions not qualified | Not compatible: MCP45HV is I²C family; MCP41HV51 uses SPI pins CS/SCK/SDI/SDO and 50 kΩ option | NO SUBSTITUTE / LIBRARY GAP | Create/import exact MCP41HV51-503E/ST symbol/footprint from official Microchip datasheet; replace proxy and rewire SPI pins. |
| U8 | TPS63030DSKR | TI TPS63030 datasheet/package addendum: TPS63030DSKR, active production, DSK SON/VSON-10, exposed thermal pad to PGND; R suffix = 3000 large T&R. | TPS63030DSK | Base TPS63030 adjustable symbol appears same functional family | DSK/VSON-10 footprint class appears same, but exact orderable MPN not present | Likely package/pinout compatible only if proxy pin table matches TI DSK pinout 1 VOUT, 2 L2, 3 PGND, 4 L1, 5 VIN, 6 EN, 7 PS/SYNC, 8 VINA, 9 GND, 10 FB, EP PGND | LIBRARY GAP — conditional proxy acceptable for draft only | Add exact TPS63030DSKR library entry or formally verify existing TPS63030DSK symbol/footprint against TI DSK table before layout. |
| U6 | LM5069MM-1 / LM5069MM-1/NOPB | TI LM5069 datasheet/package addendum: LM5069-1 = latch-off fault variant; LM5069MM-1/NOPB and LM5069MMX-1/NOPB are both VSSOP-10 DGS, same marking/function; MM vs MMX is reel quantity. | LM5069MMX-1/NOPB | Symbol can be accepted if pin table matches official LM5069 DGS-10 | Footprint can be accepted if DGS/VSSOP-10 footprint is correct | Equivalent electrical variant/package per TI; proxy differs by reel quantity only | QUALIFIED PROXY — procurement suffix gap | Keep only if symbol pins match TI pin table; update BOM/orderable preference to LM5069MM-1/NOPB or accept MMX reel. |
| K1-K3 | G5LE-14-DC5 | Omron G5LE official datasheet/product page: G5LE-14 family; 5 VDC coil; 5 V coil approx 79.4 mA, 63 Ω, 400 mW; single-pole PCB power relay family. | G5LE-1-DC5 | Proxy relay symbol only | Proxy relay footprint only | Not verified: G5LE-1-DC5 and G5LE-14-DC5 may differ in contact form/options/pin expectations | NO SUBSTITUTE / LIBRARY GAP | Add/import exact G5LE-14-DC5 symbol/footprint from official Omron datasheet; keep contacts 1/2/3 external no-connect until load interface is approved. |
| Q4-Q6 | CSD13380F3 | TI CSD13380F3 datasheet/package addendum: CSD13380F3 and CSD13380F3T are active, same PICOSTAR/YJM 3-pin FemtoFET LGA; T suffix = small tape-and-reel quantity. | CSD13380F3T | Symbol acceptable if G/S/D pins match TI package | Footprint acceptable if PICOSTAR/YJM land pattern matches | Pin/package compatible per TI; suffix is packaging quantity | QUALIFIED PROXY — orderable suffix only | Decide reel quantity; set BOM to desired CSD13380F3 or accept CSD13380F3T before procurement. |
| L1 | MSS1246T-683MLB | Coilcraft MSS1246T official datasheet/product page: MSS1246T-683ML_ = 68 µH ±20%, DCR typ/max 167/186 mΩ, Isat up to 2.3/2.5/2.7 A, Irms 1.3/1.8 A; shielded high-temp series. | Generic Inductor with MPN property | Generic symbol only | Generic footprint not qualified for MSS1246T package | Not applicable / not verified: generic inductor is not exact mechanical/electrical library part | NO SUBSTITUTE / LIBRARY GAP | Create/import exact Coilcraft MSS1246T-683MLB component and footprint; verify current/thermal margin against LM5164 design current. |
Notes by Official Evidence Source
- TI CC1354P10 datasheet/package addendum: confirms CC1354P106T0RGZR, RGZ VQFN-48, 7 mm × 7 mm, 0.5 mm pitch, active production.
- Microchip MCP41HVX1 datasheet: confirms MCP41HV51-503E/ST is SPI, 50 kΩ, TSSOP-14; not MCP45HV I²C compatible.
- TI TPS63030 datasheet/package addendum: confirms TPS63030DSKR DSK SON/VSON-10 and pin table; R suffix is large tape-and-reel.
- TI LM5069 datasheet/package addendum: confirms LM5069-1 latch-off behavior and MM/MMX reel-quantity distinction in same VSSOP-10 DGS package.
- Omron G5LE official datasheet/product page: confirms G5LE-14 DC5 coil family/specs; exact Flux library part still absent.
- TI CSD13380F3 datasheet/package addendum: confirms CSD13380F3 and CSD13380F3T share same device/package; suffix is reel quantity.
- Coilcraft MSS1246T official datasheet/product page: confirms 68 µH MSS1246T-683 family electrical data; exact MSS1246T-683MLB library footprint still required.
Required Before Any PCB/Layout/DFM Phase
- Replace all NO SUBSTITUTE / LIBRARY GAP proxies with exact components or explicitly approve each residual proxy with official pin/footprint evidence.
- Re-run pin-by-pin schematic verification after replacement.
- Preserve BENCH_ONLY status until battery, LM5069 thresholds, RF/antenna, relay load interface, stackup/clearance, thermal, and DFM decisions are closed.
Preserved Constraints
- AIRTAG_CHG_SYS = U3.SYS + C5.1.
- U3.CE remains tied to AIRTAG_PACK_NEG/GND, never SYS.
- Q2/Q3 remain DNP / BENCH_ONLY.
- K1/K2/K3 contact pins 1/2/3 remain external/no-connect.
Qualification Rules
Component Qualification Table
Notes by Official Evidence Source
Required Before Any PCB/Layout/DFM Phase
Preserved Constraints
