LDO Voltage Regulators 200 mA low quiescent current and low noise LDO

300mA Low-Dropout Linear Regulators, 1.2V output voltage, LDO with low noise and enable pin, XDFN-4 Single Output LDO OnSemi*XDFN4*1EP*1.0x1.0mm*

LDO Voltage Regulator Adjustable 300mA 0.8V Low IQ Low Noise 6-DFN #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator

150mA low quiescent current low noise voltage regulator, Fixed Output 0.8V, SOT-23-5 150mA LDO Regulator Fixed Positive SOT?23*

Linear Voltage Regulator IC Positive Fixed 1 Output 600mA SOT-25 3.3V LDO AP2112K-3.3 The AP2112K-3.3TRG1 is a low dropout (LDO) linear voltage regulator designed to provide a stable 3.3V output from a higher input voltage. It is optimized for low noise, high power supply rejection ratio (PSRR), and low quiescent current, making it suitable for battery-powered and noise-sensitive applications. The device features current limiting and thermal shutdown protection, ensuring reliable operation under fault conditions. It is commonly used in portable electronics, RF modules, microcontroller power supplies, and other low-power systems. Key Features Fixed output voltage: 3.3V Output current: up to 600 mA Low dropout voltage: ~250 mV at 300 mA load High PSRR: up to 70 dB at 1 kHz Low quiescent current: typically 55 µA Stable with low ESR ceramic capacitors Built-in overcurrent protection Thermal shutdown protection Fast transient response Absolute Maximum Ratings Input Voltage (VIN): up to 6.5 V Output Current: Internally limited Operating Junction Temperature: -40°C to +125°C Storage Temperature: -65°C to +150°C Electrical Characteristics (Typical values unless otherwise specified) Output Voltage Accuracy: ±2% Dropout Voltage: 250 mV @ 300 mA 400 mV @ 600 mA Line Regulation: 0.05%/V Load Regulation: 0.2% Quiescent Current: 55 µA Shutdown Current: <1 µA PSRR: 70 dB @ 1 kHz 45 dB @ 10 kHz Pin Configuration (SOT-23-5 / SC-70-5) VIN – Input voltage GND – Ground EN – Enable (active high) NC – No connection VOUT – Regulated output (3.3V) Package Information Package Type: SOT-23-5 (TRG1 suffix indicates tape & reel) Mounting: Surface mount Small footprint suitable for compact PCB layouts Typical Applications Battery-powered devices Wireless modules (Wi-Fi, Bluetooth, RF) Microcontroller and FPGA power supplies Portable consumer electronics Sensor and analog circuits requiring low noise Compliance & Reliability RoHS compliant Lead-free package Designed for high reliability and long operational life #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator

Linear Voltage Regulator IC Positive Fixed 1 Output 500mA SOT-23-5 The TLV75533PDBVR is a low-dropout (LDO) linear voltage regulator designed to provide a stable 3.3 V output from a higher input voltage source. It features ultra-low quiescent current and high power-supply rejection ratio (PSRR), making it ideal for battery-powered and noise-sensitive applications such as IoT devices, portable electronics, and RF circuits. The device is optimized for fast transient response and stable operation with small ceramic output capacitors. Key Features Fixed output voltage: 3.3 V Low dropout voltage (typ. ~200 mV at full load) Ultra-low quiescent current (typ. 25 µA) High PSRR for noise-sensitive applications Stable with small ceramic capacitors (≥1 µF) Thermal shutdown and overcurrent protection Available in compact SOT-23-5 package (DBV) Absolute Maximum Ratings Input voltage: –0.3 V to 6.5 V Output voltage: –0.3 V to (VIN + 0.3 V) Operating junction temperature: –40°C to +125°C Storage temperature range: –65°C to +150°C Recommended Operating Conditions Input voltage range: 1.45 V to 5.5 V Output voltage: 3.3 V (fixed) Output current: up to 500 mA Operating temperature range: –40°C to +125°C Electrical Characteristics (Typical unless otherwise noted) Output voltage accuracy: ±1% Dropout voltage: ~200 mV @ 500 mA Quiescent current: ~25 µA PSRR: up to 70 dB (at 1 kHz) Line regulation: <0.05%/V Load regulation: <0.5% Pin Configuration (SOT-23-5) Pin 1: IN – Input voltage Pin 2: GND – Ground Pin 3: EN – Enable (active high) Pin 4: NC – No connect Pin 5: OUT – Regulated output Typical Application Power management for microcontrollers and sensors Battery-powered portable devices RF and analog circuits requiring low noise supply IoT and wearable electronics Protection Features Thermal shutdown protection Overcurrent protection Undervoltage lockout (UVLO) #commonpartsLibrary #integratedcircuit #powermanagement #voltageregulator

300mA, Low Noise, Linear Regulator with output active discharge function, 1.7-5.5V input voltage range, 1.2V fixed positive output, TSOT-23-5 linear regulator ldo fixed positive TSOT?23*

800mA, Low Noise, Low Quiescent Current, HighPSRR, Low Dropout Linear Regulator #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LDO #Voltage-Regulator

200mA, Low Noise, CMOS Low Dropout Regulator, Negative, -1.8V Fixed Output, TSOT-23-5 linear regulator ldo fixed negative TSOT?23*

Low noise and low drop voltage regulator with shutdown function, 150mA, Vout = 1.5V, SOT-23-5 LDO regulator voltage SOT?23*

Linear Voltage Regulator IC Positive Fixed 1 Output 300mA SOT-23-5 The TPS7A20 is an ultra-small, low-dropout (LDO) linear regulator that can source 300mA of output current. The TPS7A20 is designed to provide low noise, high PSRR, and excellent load and line transient performance that can meet the requirements of RF and other sensitive analog circuits. Using innovative design techniques, the TPS7A20 offers an ultra-low noise performance without the addition of a noise bypass capacitor. The TPS7A20 also provides the advantage of low quiescent current, which can be ideal for battery-powered applications. With an input voltage range of 1.6V to 6.0V and an output range of 0.8V to 5.5V, the TPS7A20 can be used for a wide variety of applications. The device uses a precision reference circuit to provide a maximum accuracy of 1.5% over load, line, and temperature variations. The TPS7A20 features an internal soft-start to lower the inrush current, thus minimizing the input voltage drop during start up. The device is stable with small ceramic capacitors, allowing for a small overall solution size. The TPS7A20 has a smart enable input circuit with an internally controlled pulldown resistor that keeps the LDO disabled even when the EN pin is left floating and helps eliminate the external components used to pulldown the EN pin • Low output voltage noise: 7μVRMS – No noise-bypass capacitor required • High PSRR: 95dB at 1kHz • Very low IQ: 6.5μA • Input voltage range: 1.6V to 6.0V • Output voltage range: 0.8V to 5.5V • Output voltage tolerance: ±1.5% (max) • Very low dropout: – 140mV (max) at 300mA (VOUT = 3.3V) – 145mV (max) at 300mA (VOUT = 3.3V, DBV) • Low inrush current • Smart enable pulldown • Stable with 1µF minimum ceramic output capacitor • Packages: – 1mm × 1mm X2SON (DQN) – 0.616mm × 0.616mm DSBGA (YCK) – 0.612mm × 0.612mm DSBGA (YCJ) – 2.9mm × 2.8mm SOT23-5 (DBV) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LDO

The TPAP2112K-3.3TRG1 is a low-dropout linear voltage regulator designed to provide a stable regulated output voltage for low-power electronic systems. This device is optimized for applications requiring low noise, low quiescent current, and compact PCB implementation in portable and embedded electronics. The regulator delivers reliable voltage regulation with minimal external component requirements, making it suitable for battery-powered devices, microcontroller systems, wireless modules, sensor interfaces, and general-purpose analog and digital power rails. Its low-dropout architecture enables efficient operation even when the input voltage is close to the regulated output voltage, helping extend battery life in portable applications. The TPAP2112K-3.3TRG1 integrates internal protection features such as current limiting and thermal shutdown to improve system reliability and protect downstream circuitry from abnormal operating conditions. Its compact surface-mount package supports high-density PCB layouts and automated manufacturing processes. Engineering Specification Device Type Low-dropout linear voltage regulator Regulator Topology Positive fixed-output LDO regulator Output Voltage Fixed regulated voltage output Input Characteristics Designed for low-voltage DC input operation Dropout Characteristics Low-dropout voltage architecture for efficient regulation Output Performance Stable low-noise voltage regulation Quiescent Current Low standby current suitable for portable systems Protection Features Current limiting Thermal shutdown Short-circuit protection Thermal Characteristics Efficient thermal operation for compact embedded systems Stability Characteristics Stable operation with standard external capacitors Package Type Surface-mount package Mounting Style Surface mount technology Applications Embedded systems Battery-powered devices Wireless modules Sensor power rails Microcontroller systems Portable electronics IoT hardware Consumer electronics Industrial control systems Analog signal conditioning Manufacturer Commonly associated with 3PEAK or compatible power management vendors #commonpartslibrary #ldoregulator #voltageregulator #powermanagement #powersupply #embeddedhardware #powerelectronics #surfaceountcomponents #electronicsdesign #portableelectronics #iothardware #analogdesign #batterypowered #industrialelectronics #lowpowerelectronics

Linear Voltage Regulator IC Positive Fixed 1 Output 150mA SOT-23-5 LP2985IM5-2.7 is a low-dropout (LDO) linear voltage regulator designed to provide a stable 2.7 V output with very low quiescent current and excellent noise performance. It is optimized for battery-powered and noise-sensitive applications, offering high power supply rejection ratio (PSRR) and fast transient response. The device is housed in a compact SOT-23-5 package, making it ideal for space-constrained designs. Key Features Fixed 2.7 V output voltage Low dropout voltage Low quiescent current (IQ) High PSRR for noise-sensitive applications Stable with low ESR ceramic capacitors Thermal shutdown and current limit protection Small SOT-23-5 package RoHS compliant Electrical Characteristics Output Voltage: 2.7 V (fixed) Output Voltage Accuracy: ±1.5% (typical) Maximum Output Current: 150 mA Dropout Voltage: ~280 mV at 150 mA (typical) Quiescent Current (IQ): ~65 µA (typical) Line Regulation: 0.04%/V (typical) Load Regulation: 0.2% (typical) PSRR: Up to 70 dB (at low frequency) Operating Input Voltage Range: 2.5 V to 16 V Operating Temperature Range: -40°C to +125°C Mechanical Characteristics Package Type: SOT-23-5 (DBV) Mounting Type: Surface Mount Pin Count: 5 pins Approximate Dimensions: 2.9 mm × 1.6 mm Pin Configuration (Typical) IN: Input voltage GND: Ground OUT: Regulated output (2.7 V) EN: Enable (active high) BYPASS: Noise reduction / bypass capacitor connection Performance Characteristics Excellent output noise performance (low-noise design) Fast transient response to load changes Stable with small ceramic capacitors (typically 1 µF) Suitable for RF and analog circuits Applications Battery-powered devices Portable electronics RF and wireless modules Sensors and analog circuits Microcontroller power supplies #CommonPartsLibrary #IntegratedCircuit #PowerManagement #voltage-regulator #LDO #LP3985