Arduino Micro - MIDI Controller It uses the Arduino Micro as USB midi controller. It has 1 capacitive touch octave (12 Keys), 2 rotary encoders, a button, and a proximity sensor that can be used as a mod wheel, sustain pedal or MPE. The oled screen displays the different configuration options. It can be set to any channel or C.C. so it can be used to modify other instruments behavior. The capacitive touch keys can also be used as 12 drum machine pads.

Arduino that runs an 8 MHz bootloader on a super small, super thin board.

Arduino Uno shield used to monitor chimney smoke and provide feedback to stove. This shield powers the Arduino using TEGs and a battery. This shield provides power to an LED, fans, and a light sensor used to detect light intensity.

Arduino Template based on ATMEGA328P-MU. This MCU is used in Arduino UNO Rev. 3, Arduino Nano V3.0, and some other. This template is a good starting point for your Arduino based project. #template #project #arduino #ATMEGA328P #project-template

This is a schematic diagram of the original Arduino UNO, which you may find useful as documentation. Note: It has NO LAYOUT #arduino #uno #328p

Mixed Voltage Arduino Nano Integration Example on a 4 Layer PCB Changelog/TODO: -Breakout the SPI Bus in a 2.54mm header in a snap off manner -add an IMU -Reorder the rows of the LEDs Tutorials: https://circuitdigest.com/microcontroller-projects/interfacing-max7219-led-dot-matrix-display-with-arduino

Lipo Charger Shield. Directly plugs into Arduino Uno R3. Charge rate set with solder jumpers. Use with any MCU through tapping the VIN pin for power. VIN pin takes either

Arduino Electrical Control Shield -Redundant Temp. Sense -Geometric Monitoring -Dual RS232 Communication -USB Communication -Dual Motor Control -5 24V Control Relays -15 10V Analog IO -22 24V Protected IO

Template for Arduino Mega2560 Shield. On PCB you can find the board outline on the silkscreen. #Shield #arduino #template #mega #2560 #ATMEGA2560 #template #project #project-template

Project Overview: This project is an enhanced LED blinking circuit that goes beyond a simple 555 timer-based design. It incorporates additional features such as random blinking patterns, speed control, and a start/stop function. The project utilizes a microcontroller, such as an Arduino or Raspberry Pi, to control the blinking patterns, speed, and start/stop functionality. LED Blinking: The board features a total of 8 LEDs that blink in various random patterns. When the board is powered on, even before user interaction, the LEDs start blinking randomly, creating an eye-catching display. Each LED has its own current-limiting resistor to ensure proper current flow and prevent damage. The microcontroller is programmed to generate random blinking patterns for the LEDs, ensuring that the LEDs do not blink in a predictable or sequential order. This random blinking adds an element of unpredictability and visual interest to the project. Speed Control: The board includes two speed control buttons that allow the user to adjust the blinking speed of the LEDs. Button 1 is designated as the "fast" button, increasing the blinking speed when pressed, while Button 2 is designated as the "slow" button, decreasing the blinking speed when pressed. The speed control provides a range of blinking speeds, from a slow, gradual blink to a rapid, strobe-like effect. The microcontroller monitors the state of the speed control buttons and adjusts the blinking speed accordingly. Start/Stop Functionality: A third button serves as a start/stop control. When pressed, it toggles the blinking of the LEDs on or off. This allows the user to freeze the blinking pattern at any desired moment or resume the blinking when desired. The microcontroller handles the start/stop functionality by turning the LEDs on or off based on the state of the start/stop button. Manual Speed Adjustment: In addition to the speed control buttons, the board includes a potentiometer or variable resistor. This component allows the user to manually adjust the blinking speed of the LEDs by turning the knob or sliding the control. The manual speed adjustment provides more precise and customizable control over the blinking speed compared to the preset speeds of the buttons. The microcontroller reads the analog value from the potentiometer and adjusts the blinking speed accordingly. Power and Connectivity: The board is powered through a USB-C or USB-micro B connector, allowing it to be easily connected to a power source such as a computer or wall adapter. A voltage regulator may be included to ensure a stable and appropriate voltage supply to the components. A power switch is incorporated to conveniently turn the board on or off.

Template for Arduino Nano RP2040 Connect Board. #template #project-template #arduino #rp2040

Template for Arduino MKR wifi 1010. A NINA-W10 Transceiver; 802.11 b/g/n (Wi-Fi, WiFi, WLAN) 2.4GHz Evaluation Board #template #project-template #arduino #MKR

Template for ATmega32U4 Arduino Micro AVR® ATmega AVR MCU 8-Bit Embedded Evaluation Board #project-template #template #arduino #micro

Template for Arduino Nano Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Nano itself along with the board outline on the silkscreen. #Arduino #Nano #Shield #template #project #project-template

Un proyecto en donde un arduino es alimetado por un panel solar que carga 3 pilas que suman 9 v. Del arduino está conectado una tira de luces rgb que se prenden segun el nivelde CO que es medido por un sensor de Co

Adaptation of 28-PINS PROJECT by FEDEVEL ACADEMY to Flux (c) 2015 Designed by FEDEVEL Academy http://www.fedevel.com/academy. Based on Arduino: http://www.arduino.cc. Released under Creative Commons Attribution-ShareAlike 3.0 Unported.

Arduino Micro - MIDI Controller It uses the Arduino Micro as USB midi controller. It has 1 capacitive touch octave (12 Keys), 2 rotary encoders, a button, and a proximity sensor that can be used as a mod wheel, sustain pedal or MPE. The oled screen displays the different configuration options. It can be set to any channel or C.C. so it can be used to modify other instruments behavior. The capacitive touch keys can also be used as 12 drum machine pads.

Arduino Template based on ATMEGA2560-16AU. This MCU is used in Arduino Mega2560, Arduino Arduino Mega ADK, and some other. This template is a good starting point for your Arduino based project. #Arduino #mega #2560 #ATMEGA2560 #template #project #project-template

Adaptation of 28-PINS PROJECT by FEDEVEL ACADEMY to Flux (c) 2015 Designed by FEDEVEL Academy http://www.fedevel.com/academy. Based on Arduino: http://www.arduino.cc. Released under Creative Commons Attribution-ShareAlike 3.0 Unported.

Breadboard power supply provides both 3.3 and 5V DC to suit all popular microcontrollers such as the Arduino.

2 channel relay module for arduino

The Arduino Uno R3 is a microcontroller board based on a removable ATmega328P 20 digital input/output pins AVR MCU 8-Bit 5V USB 16MHz #Module #Arduino

The AAduino is an wireless Arduino clone the size of an AA battery with Keystone battery terminals rotated 180° to act as positive and negative terminals. It is meant to go inside a 3xAA battery holder creating a very small wireless node. Powered by an ATMega328p, it is fitted with an RFM69CW companion, two DS18B20 temperature sensors and an indicator LED

Welcome to your new project. Imagine what you can build here.

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

Template for creating an Arduino MKR shield (https://www.arduino.cc/en/hardware#mkr-family) #Arduino #template #project #arduinomkr #zero

An I2C extension shield with 6 shielded ethernet ports and a TCA9548 breakout board. This board is for the target side, any microcontroller with a standard Arduino header can use it. With proper target side hardware and an SSTP ethernet cable, the board provides robust i2c communication over 10ft(could be longer, haven't tested it yet) with a bitrate of 400kHz under a noisy environment( near motors, power cables, switches, etc). The shield board provides power to the target side and can power the i2c device. The board also supports drdy trigger, which is available on many i2c sensors. The TCA9548 breakout board is for a scenario in which all of your i2c devices have the same address. #Arduino #Uno #Shield #Template #project-template #project

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

Template for creating an Arduino MKR shield (https://www.arduino.cc/en/hardware#mkr-family) #Arduino #template #project #arduinomkr #zero

Template for Arduino GIGA R1 WiFi Shield. On PCB you can find the board outline on the silkscreen. #Shield #Arduino #GIGA #STM32H7 #STM32H747XI #template #project #project-template #ABX00063

The Arduino Uno learner's kit with ESP32 is a versatile educational tool for beginners. It combines an Arduino Uno board with additional components like a 2-channel motor driver, 7-segment display, relay outputs, programmable LEDs, push buttons, and analog inputs. This kit enables learners to explore electronics, programming, robotics, home automation, and more. With the ESP32 module, Wi-Fi and Bluetooth connectivity are possible, expanding the range of projects. It's a comprehensive package that fosters creativity and knowledge in the exciting world of electronics and programming. #arduino #esp32

The Arduino MKR MEM shield will allow you to add more flash memory and storage. It provides 2-megabytes of flash memory. #example

Template of shield family MKR Arduino #project-template #Arduino #template #project #arduinomkr #zero

Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

Template of shield family MKR Arduino #project-template #Arduino #template #project #arduinomkr #zero

Pneumatic Shield for Arduino Nano. You can control 2 pumps and 2 valves with PWM signals. Also, there is manual control with switches. #Arduino #Nano #Shield #project

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

This is a NRF24L01 shield board for Arduino Nano 33 that can be used in many IoT projects #IoT #NRF #arduino #nano33

Glucose meter is a medical device that determines the approximate concentration of glucose in the blood. A strip containing chemicals that react with glucose in the drop of blood is used for each measurement. Op Amp Circuit description: LMC6484 IC_D is an integrator circuit. LMC6484 IC_A and IC_C are configured as unity gain buffer amplifiers. LMC6484 IC1B is configured as a trans impedance amplifier. Arduino is used for processing of the measured glucose level. The Arduino use the built in ADC module for analog to digital conversion. Further, the Arduino helps to detect the strip also.

Arduino that runs an 8 MHz bootloader on a super small, super thin board.

The Arduino MKR MEM shield will allow you to add more flash memory and storage. It provides 2-megabytes of flash memory.

LCD timer with Arduino that uses an encoder to set the time. The code works but it's limited, feel free to upgrade Feel free to review the board.

Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

This is the multipurpose PCB that works with Arduino Nano, a way that you can run 2 Stepper motors, 2 DC motors, 2 Servo motors at the same time and this is not it you can even connect BT module, rotary encoder, I2C device, potentiometer at same time. This PCB is very much helpful in building any project and no need to worry about messy wire connections.

The Arduino MKR MEM shield will allow you to add more flash memory and storage. It provides 2-megabytes of flash memory.

Template for creating an Arduino MKR shield (https://www.arduino.cc/en/hardware#mkr-family) #Arduino #template #project #arduinomkr #zero