1A Standalone Linear Li-lon Battery Charger with Thermal Regulation in SOP-8 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #BatteryCharger #TP4056

Distributed ESP32‑Based Vital‑Signs Monitoring System with MAX30102 Sensor and I²C OLED

SOP-8-EP Battery Management ICs ROHS #CommonPartsLibrary #IntegratedCircuit #BatteryManagement

Linear 1-Cell lithium-battery charger in ESOP-8 package. 1A max. charging current.

Compact ESP32-C3-MINI-1 USB-C LiPo Dev Board with I2C OLED Interface and TP4056 Charging

1A Linear Li-Ion Battery Charger Power Management IC Development Tools Li-ion charger EVAL BOARD FOR TP4056 TP4056 Type-C

TP4056 1S 1C charger with USB-c connector and battery protection. Copied everything from here: https://easyeda.com/modules/TP4056-Charging-module-USB-C-data_a4752b5b6c6a4c93afdd8b7119d0622c P+ and P- are the outputs but don't have a connector or solder pad yet. Only the schematic has been designed. I didn't do anything on the PCB part! Place these components at your own design! DISCLAIMER: I did not design this nor do i have knowledge about electronics. I'm still learning and i copied this for own use. USE AT OWN RISK!

TP4056 constant-current/constant-voltage linear charger

The TP4056 1A Li-ion Lithium Battery Charging Module with Current Protection – Mini USB is a compact device designed to charge individual lithium ion (Li-Ion) cells that lack their own protective circuit, such as 16550s, with a single cell capacity of 3.7V and 1 Ah or higher. This battery charging module employs the TP4056 charger IC and DW01 battery protection IC to provide a charge current of 1A, which will cease upon completion of the charging process. https://robocraze.com/products/tp4056-lithium-battery-charging-board #PCB #TP4056 #battery

The DW01A is a compact single-cell lithium-ion/lithium-polymer battery protection IC designed to safeguard rechargeable batteries from unsafe operating conditions such as overcharge, overdischarge, overcurrent, and short circuits. It is widely used in battery packs, power banks, TP4056 charging modules, portable electronics, and IoT devices because of its low power consumption and minimal external component requirements. Key Features Single-cell Li-ion/Li-Po battery protection Overcharge protection (typically 4.3V) Overdischarge protection (typically 2.4V) Overcurrent and short-circuit protection Ultra-low quiescent current (~3µA typical) Very low standby/discharge current Drives external dual MOSFETs for charge/discharge control Internal delay timers for noise immunity No external timing capacitors required Compact SOT-23-6 package Wide operating voltage range Automatic recovery after fault removal Typical Applications 18650 battery protection boards Power banks Bluetooth devices Wearables Portable consumer electronics DIY battery-powered projects TP4056 charging modules with protection circuitry #CommonPartsLibrary #IntegratedCircuit #PowerManagement