FLORA has a small but easy to use onboard reset button to reboot the system. The power supply is designed to be flexible and easy to use. There is an onboard polarized 2 JST battery connector with protection schottky diode for use with external battery packs from 3.5v to 16v DC in. Can be used with LiIon/LiPoly, LiFe, alkaline or rechargeable NiMh/NiCad batteries of any size. The FLORA does not have a LiPo charger included by design, this allows safe use with multiple battery types and reduces risk of fire as it is not recommended to charge these batteries on fabric.

Diode Schottky 20 V 1A Through Hole DO-41 #CommonPartsLibrary #Diode #Schottky

This project is focused on designing a highly efficient PCB for a switching power supply using a robust selection of electronic components. Our design leverages a flyback topology featuring a ferrite transformer (options EE25 or EE33), a PWM integrated circuit (TL494, SG3525, or UC3842), and a power MOSFET (IRF840 or a similar alternative) for effective high-voltage switching. Fast and reliable rectification is ensured by using a Schottky diode (MBR20100 or FR107) along with a rectifier bridge built from four 1N4007 diodes or a dedicated 4A bridge. Key stabilization and regulation components include the TL431 reference regulator and a Zener diode for precise voltage control in critical areas. For input and output filtering, the design incorporates electrolytic capacitors (470 µF, 25 V for output and 400 V, 100 µF for input) and ceramic capacitors (ranging from 1 nF to 100 nF) to limit high-frequency noise. Additional safety and operational features are provided by an NTC (soft-start thermistor) to prevent current spikes, various resistors (from 1 Ω to 100kΩ), an optocoupler (PC817) for signal isolation, a switch, and a protection fuse. Before moving forward with a finalized PCB layout and schematic details, we need to clarify a few design choices: 1. Transformer Choice: Would you prefer using the EE25 or the EE33 ferrite transformer variant as the heart of the switching power supply design? This detailed approach ensures that the power supply not only meets rigorous performance and safety standards but also supports a reliable and scalable solution for various electronic applications. #PCBDesign #SwitchingPowerSupply #Electronics #SMPS #PowerElectronics #FlybackConverter #CircuitDesign #ElectronicsComponents

Diode Schottky 40 V 1A Surface Mount SOD-123 #commonpartslibrary #diode #schottky

Diode Schottky 100 V 5A Surface Mount DO-214AA (SMB)

This design is a power supply system that converts 240V AC (60Hz) into three regulated DC outputs. The architecture includes an AC rectifier and filter to form a DC bus, followed by a boost converter (MT3608) that steps up the voltage to 5V. From the boosted output, three voltage regulators provide different outputs: a 5V rail directly from the boost converter, a 3.3V rail using the AP7333-33 buck converter, and a 1.8V rail using the AP7333-18 buck converter. Protection components such as Schottky diodes and stability capacitors are incorporated, along with LED indicators for charging and power status. #PowerSupply #VoltageRegulation #ACDCConversion #BoostConverter #BuckConverter #CircuitDesign #PowerSystemArchitecture