• 8x8 Display with IMU V2

    8x8 Display with IMU V2

    Mixed Voltage Arduino Nano Integration Example on a 4 Layer PCB Changelog/TODO: -Breakout the SPI Bus in a 2.54mm header in a snap off manner -add an IMU -Reorder the rows of the LEDs Tutorials: https://circuitdigest.com/microcontroller-projects/interfacing-max7219-led-dot-matrix-display-with-arduino

    markwuflux

    markwuflux

    0 Uses

    14 Comments

    6 Stars

  • Arduino Force Units Connection Shield

    Arduino Force Units Connection Shield

    An I2C extension shield with 6 shielded ethernet ports and a TCA9548 breakout board. This board is for the target side, any microcontroller with a standard Arduino header can use it. With proper target side hardware and an SSTP ethernet cable, the board provides robust i2c communication over 10ft(could be longer, haven't tested it yet) with a bitrate of 400kHz under a noisy environment( near motors, power cables, switches, etc). The shield board provides power to the target side and can power the i2c device. The board also supports drdy trigger, which is available on many i2c sensors. The TCA9548 breakout board is for a scenario in which all of your i2c devices have the same address. #Arduino #Uno #Shield #Template #project-template #project

    suckatpcbb

    suckatpcbb

    0 Uses

    45 Comments

    1 Star

  • WiFi Door and Window Sensor

    WiFi Door and Window Sensor

    A compact battery-powered door/window sensor built around the ESP32-C3-MINI-1-N4 module. The design uses a single non-rechargeable AA cell with a TPS613221A 3.3 V boost regulator, reed switch magnetic contact sensing, low-power wake/report/sleep firmware strategy, RGB status LED for setup feedback, BOOT/EN controls, programming header, and input polarity protection. It is intended for smart-home security and automation applications, supporting WiFi or Bluetooth LE hub reporting with emphasis on low idle current, reliable RF burst power delivery, and field-replaceable battery operation. #ESP32-C3 #BLE #WiFi #DoorSensor #WindowSensor #ReedSwitch #LowPower #BatteryPowered #SmartHome #IoT

    vasy_skral

    vasy_skral

    +

    cherepanyadima

    0 Uses

    18 Comments

    1 Star

  • Keypad lock reference design

    Keypad lock reference design

    This project involves the design of a keypad lock system. It utilizes an ATMEGA328P microcontroller, buzzers, LEDs for indicator functions and a 4x3 matrix keypad. An in-circuit serial programming (ISP) header is also present for programming the microcontroller. #project #Template #projectTemplate #lock #keypad #arduino #atmega328 #TPS613222A #ISP #buzzer #referenceDesign #simple-embedded #microchip #template #reference-design

    christophx

    christophx

    0 Uses

    1 Comment

    1 Star

  • ThirstIQ Cap

    ThirstIQ Cap

    High-level recreation of the ThirstIQ Cap wiring diagram using an ESP32-WROOM-32 with AMS1117-3.3 regulated battery input, inline ON/OFF switch, four touch input headers on IO32/IO33/IO25/IO26, shared I2C OLED and RTC on IO21/IO22, UART debug/programming header on TXD0/RXD0, BOOT and RESET pushbuttons on IO0 and EN, buzzer on IO4, common 3V3/GND distribution, and PCB preparation for a 160 mm x 100 mm 4-layer layout. Layout intent includes clean 3.3 V power distribution, local decoupling for regulator and ESP32, accessible external headers/buttons, short clean BOOT/EN traces, shared I2C routing, touch-signal separation from noisy power and buzzer traces, and ESP32 antenna keepout.

    mayurkul

    mayurkul

    0 Uses

    0 Comments

    1 Star

  • PIN_Headers_40

    PIN_Headers_40

    2x20 Pin Header (2mm pitch)

    mustafadut

    mustafadut

    0 Uses

    0 Comments

    1 Star

  • MPXV7002DP

    MPXV7002DP

    Through Hole straight pin header, 01x03, 2.54mm pitch, single row #connector #pinheader #tht

    flyboy101

    flyboy101

    0 Uses

    0 Comments

    1 Star

  • Arduino Pro Micro

    Arduino Pro Micro

    The Micro is a microcontroller board based on the ATmega32U4 (datasheet), developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

    xendilor

    xendilor

    0 Uses

    0 Comments

    1 Star

  • Pin Header 01x04 2.54mm Vertical

    Pin Header 01x04 2.54mm Vertical

    Through Hole straight pin header, 01x04, 2.54mm pitch, single row #connector #pinheader #tht

    mikellg

    0 Uses

    1 Comment

    0 Stars

  • Pin Header 01x08 2.54mm Vertical

    Pin Header 01x08 2.54mm Vertical

    Through Hole straight pin header, 01x08, 2.54mm pitch, single row #connector #pinheader #tht

    flyboy101

    flyboy101

    0 Uses

    0 Comments

    0 Stars

  • Arduino Nano Barebones - 3V3 SMD No Header

    Arduino Nano Barebones - 3V3 SMD No Header

    Important Note: You must connect your own SPI/ICSP programming header if you want to burn the Arduino bootloader to the MCU. In this version, you must also provide your own UART interface. SMD Manufacturing: Need a hotplate and solderpaste Good to haves: - Oscillator Decoupling Caps Expose UART via connector Programming Button Onboard LED Reset Button You don't have to populate everything! Only these are mandatory: Reset Button Find the reference schematic here: https://www.arduino.cc/en/uploads/Main/ArduinoNano30Schematic.pdf

    jflan1993

    0 Uses

    0 Comments

    0 Stars

  • Pin Header 01x10 2.54mm Vertical

    Pin Header 01x10 2.54mm Vertical

    Through Hole straight 15 pin header, 01x10, 2.54mm pitch, single row #pinheader #tht #SimplifiedFootprint

    arthur1

    0 Uses

    0 Comments

    0 Stars

  • Pin Header 01x10 2.54mm Vertical

    Pin Header 01x10 2.54mm Vertical

    Through Hole straight pin header, 01x10, 2.54mm pitch, single row #pinheader #tht #SimplifiedFootprint

    arpad

    0 Uses

    0 Comments

    0 Stars

  • Pin Header Connector 02x03

    Pin Header Connector 02x03

    Form of electrical connector

    disfireco

    0 Uses

    1 Comment

    0 Stars

  • female header m20

    female header m20

    Welcome to your new project. Imagine what you can build here.

    jkjake561

    0 Uses

    0 Comments

    0 Stars

  • Soc fan header 4pin

    Soc fan header 4pin

    Welcome to your new project. Imagine what you can build here.

    mahithadevi

    +

    0 Uses

    0 Comments

    0 Stars

  • Arduino Mega 3pin PWM board

    Arduino Mega 3pin PWM board

    A board to use any PWM output with a 3 pin header

    crazy2006m

    0 Uses

    16 Comments

    0 Stars

  • 8x8 Display with IMU V2 for Video

    8x8 Display with IMU V2 for Video

    Changelog/TODO: -Breakout the SPI Bus in a 2.54mm header in a snap off manner -add an IMU -Reorder the rows of the LEDs -Create an external USB-C UART programmer to provide programming and power Tutorials: https://circuitdigest.com/microcontroller-projects/interfacing-max7219-led-dot-matrix-display-with-arduino

    markwuflux

    markwuflux

    0 Uses

    7 Comments

    0 Stars

  • Office Productivity Hub Reference Design

    Office Productivity Hub Reference Design

    This is an office productivity hub featuring an STM32F103C8T6 MCU, GC9A01A display driver, voltage regulator, capacitors, resistors, switches, USB-C, and SWD header. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #stm32f1 #reference-design

    vasyl

    0 Uses

    4 Comments

    0 Stars

  • PIN 02x06 2.54mm Vertical

    PIN 02x06 2.54mm Vertical

    Through Hole straight pin header, 02x06, 2.54mm pitch, double row #pinheader #tht #simplifiedFootprint

    yaelgonzalez

    0 Uses

    3 Comments

    0 Stars

  • CERILUME Phase 1 LED Controller 0f3b

    CERILUME Phase 1 LED Controller 0f3b

    Low-voltage logic-only CERILUME Phase 1 LED controller using an Arduino Nano ESP32 plug-in module, 5V logic level shifting for WS2812/SK6812 data, microphone input header, and labeled test pads. LED power distribution and high-current switching are intentionally out of scope.

    cerilume

    +

    0 Uses

    1 Comment

    0 Stars

  • Mini Paper USV PCB Upgrade v1.0

    Mini Paper USV PCB Upgrade v1.0

    Mini Paper USV PCB Upgrade v1.0 schematic twin using an ELEGOO MEGA 2560, L293D H-bridge, HC-SR04 ultrasonic sensor, SG90 servo header, LED indicators, buzzer, and dual 9V parallel battery input.

    josalo7299

    0 Uses

    1 Comment

    0 Stars

  • KEY PAD x 24 v3 8298

    KEY PAD x 24 v3 8298

    This module involves the design of a keypad lock system. It utilizes an ATMEGA328P microcontroller, buzzers, LEDs for indicator functions and a 4x3 matrix keypad. An in-circuit serial programming (ISP) header is also present for programming the microcontroller. #template #lock #keypad #reusable #module #simple-embedded #microchip #arduino #atmega328 #TPS613222A #ISP #buzzer #sublayout

    thgiga

    0 Uses

    1 Comment

    0 Stars

  • 0533984002 e5c0

    0533984002 e5c0

    Connector Header Surface Mount 2 position 0.049" (1.25mm)

    lunarresources

    +

    0 Uses

    1 Comment

    0 Stars

  • 0533984002_Sample 4b8f

    0533984002_Sample 4b8f

    Connector Header Surface Mount 2 position 0.049" (1.25mm)

    lunarresources

    +

    0 Uses

    1 Comment

    0 Stars

  • IR remote control Module

    IR remote control Module

    This is a schematic of an IR (infrared) remote control system. It's built around a Microchip ATTINY2313 microcontroller (U1) and boasts five push-button switches, an indicator RED LED and an electret buzzer for user interaction. An ISP header provides programming capabilities. The project is battery-powered and implements boost converter TPS613222AD (IC1) for stable power supply. #project #Template #projectTemplate #lock #keypad #attiny2313 #TPS613222A #ISP #buzzer #reusable #module #simple-embedded #microchip #arduino #sublayout

    ranveerdev

    0 Uses

    1 Comment

    0 Stars

  • Connector 01x04 Horizontal

    Connector 01x04 Horizontal

    Through hole straight pin header, 1x04, 4 pin, 4-pin, horizontal, angled, 2.54mm pitch, 6mm pin lenght single row

    jonathandguerrero

    0 Uses

    1 Comment

    0 Stars

  • IR remote control Reference Design 3c2m

    IR remote control Reference Design 3c2m

    This is a schematic of an IR (infrared) remote control system. It's built around a Microchip ATTINY2313 microcontroller (U1) and boasts five push-button switches, an indicator RED LED and an electret buzzer for user interaction. An ISP header provides programming capabilities. The project is battery-powered and implements boost converter TPS613222AD (IC1) for stable power supply. #project #Template #projectTemplate #lock #keypad #arduino #attiny2313 #TPS613222A #ISP #buzzer #referenceDesign #simple-embedded #microchip #template #reference-design

    caroln

    0 Uses

    1 Comment

    0 Stars

  • Arduino Force Units Connection Shield sDtw

    Arduino Force Units Connection Shield sDtw

    An I2C extension shield with 6 shielded ethernet ports and a TCA9548 breakout board. This board is for the target side, any microcontroller with a standard Arduino header can use it. With proper target side hardware and an SSTP ethernet cable, the board provides robust i2c communication over 10ft(could be longer, haven't tested it yet) with a bitrate of 400kHz under a noisy environment( near motors, power cables, switches, etc). The shield board provides power to the target side and can power the i2c device. The board also supports drdy trigger, which is available on many i2c sensors. The TCA9548 breakout board is for a scenario in which all of your i2c devices have the same address. #Arduino #Uno #Shield #Template #project-template #project

    yefersonfv

    0 Uses

    1 Comment

    0 Stars

  • Arduino Nano Barebones - SMD gamH 20f8

    Arduino Nano Barebones - SMD gamH 20f8

    Important Note: You must connect your own SPI/ICSP programming header if you want to burn the Arduino bootloader to the MCU. SMD Manufacturing: Need a hotplate and solderpaste Good to haves: - Oscillator Decoupling Caps Expose UART via connector Programming Button Onboard LED Reset Button You don't have to populate everything! Only these are mandatory: Reset Button Find the reference schematic here: https://www.arduino.cc/en/uploads/Main/ArduinoNano30Schematic.pdf

    agovardhanpcbdesigner

    0 Uses

    1 Comment

    0 Stars

  • JST B2B PH K 01x02 Connector - test g9Mc

    JST B2B PH K 01x02 Connector - test g9Mc

    Connector Header Through Hole 2 position 0.079" (2.00mm) 01x02 JST B2B PH K

    oozliuoo

    0 Uses

    1 Comment

    0 Stars

  • DeskNeuron Macro Pad V0.1

    DeskNeuron Macro Pad V0.1

    DeskNeuron V0.1 — USB-C ESP32-S3 6-key macro pad with dual EC11 encoders and SPI TFT header.

    ahmedabusalih

    0 Uses

    0 Comments

    0 Stars

  • Pi Zero Sensor HAT

    Pi Zero Sensor HAT

    Raspberry Pi Zero HAT-style PCB with bottom 40-pin GPIO header and top-side connectors for MLX90640 thermal camera, SCD41, PIR, IMU, OLED, and thermal sensor terminals.

    sensoulllc

    0 Uses

    0 Comments

    0 Stars

  • USB-C LiPo PIR Sensor

    USB-C LiPo PIR Sensor

    Battery-powered infrared/PIR sensor board with USB-C charging, single-cell LiPo battery input, 3.3 V regulation, sensor output header, and status indicators.

    iamsoroush

    0 Uses

    0 Comments

    0 Stars

  • Arduino Mega Firefighting Robot Shield

    Arduino Mega Firefighting Robot Shield

    Arduino Mega 2560 sensor/actuator interface shield for a firefighting differential robot with labeled connectors, onboard IR receiver, buzzer, MPU6050 header, battery VIN protection, battery sensing, LED outputs, and fan MOSFET control.

    andremassuca

    0 Uses

    0 Comments

    0 Stars

  • Coffee Waker Main HQ W/ Module V5.0.1 1243 f1b0 4389

    Coffee Waker Main HQ W/ Module V5.0.1 1243 f1b0 4389

    Multi-subsystem ESP32-S3 coffee maker/alarm controller board for a Coffee Waker appliance. The design uses an ESP32-S3-WROOM-1-N8R8 module as the main Wi-Fi/Bluetooth MCU, with USB-C 2.0 device connectivity through a USB4105-GF-A connector, 5.1 kΩ CC pull-downs, and USBLC6-2SC6 ESD protection on the USB D+/D− pair. Power architecture includes a 12 V input on a JST VH B4P connector, a TPS62932 buck regulator generating the 5 V rail, a TLV1117LV33 3.3 V LDO for MCU/logic power, and TPS22919 load switches for controlled 3.3 V/5 V peripheral rails. Functional blocks include an NAU7802 load-cell ADC on I2C with two differential load-cell channels, a MAX98357A I2S audio amplifier/DAC with speaker/output filtering, a microSD socket on SDIO, I2C/test headers, UART/programming header, and auxiliary JST VH connectors for wake-light or external loads. The high-voltage section includes 120 VAC input/output screw terminals, a 5 V SPST-NO relay rated 15 A / 240 VAC max, a 1 A fuse, MOV surge suppression, diode snubber, and a dedicated heater output terminal.

    ryanf

    0 Uses

    0 Comments

    0 Stars

  • ESP32 Industrial Vibration Sensor

    ESP32 Industrial Vibration Sensor

    USB-powered ESP32-WROOM-32 industrial vibration and temperature monitoring sensor node with ADXL345 SPI accelerometer, DS18B20 1-Wire temperature sensor, SSD1306 I2C OLED, LEDs, buzzer, relay header, and 3.3V AMS1117 power supply.

    coskunemirhan2311

    0 Uses

    0 Comments

    0 Stars

  • B6B-XH-AM(LF)(SN)

    B6B-XH-AM(LF)(SN)

    JST XH Connector Header Through Hole 6 position 0.098" (2.50mm) #commonpartslibrary #connector #header #tht #JST-XH

    qgen-joshua

    0 Uses

    0 Comments

    0 Stars

  • CERILUME Phase 1 LED Controller

    CERILUME Phase 1 LED Controller

    Low-voltage logic-only CERILUME Phase 1 LED controller using an Arduino Nano ESP32 plug-in module, 5V logic level shifting for WS2812/SK6812 data, microphone input header, and labeled test pads. LED power distribution and high-current switching are intentionally out of scope.

    cerilume

    0 Uses

    0 Comments

    0 Stars

  • CMC to Ribbon Harness Interface

    CMC to Ribbon Harness Interface

    Interface board connecting a 64-pin TE CMC connector 2209129-1 to a 64-pin TE ribbon header 1-5102154-2 with straight-through pin mapping from pin 1 to pin 64.

    ggiles

    0 Uses

    0 Comments

    0 Stars

  • Cyberdeck Power Hub

    Cyberdeck Power Hub

    Cyberdeck power distribution hub using a TP4056 Type-C Li-ion charger module, MT3608 boost converter module, switched output rail, voltmeter, servo, Arduino VIN, button signal header, and battery terminal on a 50 mm × 70 mm PCB.

    awillard19

    0 Uses

    0 Comments

    0 Stars

  • ESP32 Ultrasonic Flow Meter

    ESP32 Ultrasonic Flow Meter

    USB-C powered ESP32 WiFi water flow meter for an external ultrasonic sensor on 3/4 inch PVC pipe, with protected 5V input, 3.3V regulation, programming header, reset/boot support, and status LEDs.

    amirkat

    0 Uses

    0 Comments

    0 Stars

  • Scary Aquamarine Scramble Suit 3580

    Scary Aquamarine Scramble Suit 3580

    Scary Aquamarine Scramble Suit — Raspberry Pi LiDAR Scanner HAT with TFmini-Plus UART, TMC2209 stepper drive, MPU-6050 IMU, USB-C 5V input, 12V motor input, debug header, LEDs, and test points for indoor 360° obstacle mapping.

    latticelabs

    +

    0 Uses

    0 Comments

    0 Stars

  • ESP32 RS485 Water Flow Meter

    ESP32 RS485 Water Flow Meter

    USB-C powered ESP32 WiFi water flow meter schematic with protected 5V input, 3.3V LDO, 12V boost supply for an external RS485 ultrasonic sensor, UART programming header, boot/reset network, and three status LEDs for power, WiFi, and flow activity.

    cochrane

    0 Uses

    0 Comments

    0 Stars

  • ESP32-C3 Industrial Controller

    ESP32-C3 Industrial Controller

    Industrial ESP32-C3 controller board with isolated RS-485, protected 12V-24V input, opto-isolated digital inputs, sensor interfaces, and production debug header.

    namyoungwoo

    0 Uses

    0 Comments

    0 Stars

  • ZAPP-LB-V1 Smart Relay Logic Board

    ZAPP-LB-V1 Smart Relay Logic Board

    2-layer SELV ESP8266 smart relay logic board using an ESP-12F module, MCP1700-3302E 5V-to-3.3V LDO, exact 2x7 relay/control connector pinout, 4-pin UART programming header, GPIO0 flash test point, active-low GPIO2 status LED, power and GPIO test points, 55x45 mm board outline, top-side assembly, bottom solid ground pour, ESP-12F antenna keepout, 4 M3 mounting holes, and silkscreen connector labels for production use.

    cookiea11

    0 Uses

    0 Comments

    0 Stars

  • TIMI ESP32-S3 Prototype

    TIMI ESP32-S3 Prototype

    Conservative first-revision TIMI prototype built around ESP32-S3-WROOM-1-N16R8 with USB-C 5V input, native USB, 3.3V regulation, onboard MAX98357A audio out, external INMP441 header, status LEDs, buttons, UART debug header, required test points, and 4-layer antenna-conscious PCB constraints.

    andrzejszymkowiak

    +

    0 Uses

    0 Comments

    0 Stars

  • WT32-ETH01 Carrier Socket

    WT32-ETH01 Carrier Socket

    WT32-ETH01 carrier refactored for a single 2x10 WT32 header, 12V input terminal, 6-pin Wiegand terminal, and a 12V-to-5V buck stage with level-shifted D0/D1 plus transistor-driven LED and BUZZER outputs, prepared for a simple 2-layer layout.

    matteogrolla

    0 Uses

    0 Comments

    0 Stars

  • PIC16F877A HX711 Load Cell Interface

    PIC16F877A HX711 Load Cell Interface

    PIC16F877A-based load-cell measurement system using an HX711 24-bit ADC, 4 MHz crystal clock, load-cell connector, ICSP programming header, regulated 5V input, and low-noise PCB layout for internship deliverables.

    abeetpaul

    0 Uses

    0 Comments

    0 Stars

  • DeWalt 21V 5S Experimental Charger

    DeWalt 21V 5S Experimental Charger

    Experimental 21V/5S Li-ion DeWalt battery charger with 21V DC input, relay-switched charge path, tap monitoring, ESP32-WROOM external controller interface, test header, and 2-layer prototype PCB intent.

    19002041

    0 Uses

    0 Comments

    0 Stars