Bilateral smart running insole data logger using two nearly identical ESP32-S3 pressure-sensing PCBs. Left variant is an ESP-NOW slave without microSD; right variant is the master with microSD logging. Both preserve the 16-zone FSR mux front end, LiPo charging, AP2112K regulation, USB-C charging input, JST battery connector, and the 280mm x 90mm 2-layer low-profile insole form factor.

Glove interface board using Seeed Studio XIAO ESP32S3. Manufacturing path updated for partial assembly: preserve existing glove interface circuitry (FSR inputs on J3-J7, I2C on J8, SPI on J9, pull resistors R1-R7, decoupling C1) and source U1 separately because JLCPCB stock for MPN 113991114 is unavailable. Assemble all other parts normally, leave U1 for customer-supplied/manual installation, and do not substitute U1 unless a verified XIAO-format pin-compatible replacement is explicitly approved.

Raspberry Pi 5 Sensor Hub with Protected Power Tree, Teensy 4.1 Core, and 36‑Channel FSR Front-End

Compact 4-Layer Raspberry Pi 5 Sensor Hub with Teensy 4.1, 36-Channel FSR Network, SPI Encoders, and Qwiic IMU

Smart Chair V1: ESP32-C3-based seat-occupancy and posture sensing hub with 4× FSR channels and IMU over I2C, featuring corrected USB-C power wiring with TVS protection, remapped I2C on IO4/IO5 with pull-ups, dedicated PROG_TX/PROG_RX/BOOT/EN test pads, and antenna keep-out zone #consumer-electronics #BLE #I2C #USB-C #IoT