Buck Switching Regulator IC Positive Fixed 5V 1 Output 1A SOT-23-6 The LMR50410Y5FQDBVRQ1 (part of the LMR50410-Q1 family from Texas Instruments) is a synchronous step-down (buck) DC-DC converter designed for automotive and industrial power applications. It operates over a wide input voltage range of 4 V to 36 V and can deliver up to 1 A output current, making it suitable for converting higher, unregulated voltages into stable lower voltages (e.g., 5 V or 3.3 V rails). The device integrates power switches, control circuitry, and compensation internally, allowing simple design with minimal external components and a compact PCB footprint. Key Features Power & Performance Wide input voltage range: 4 V to 36 V Output current: up to 1 A High switching frequency: 2.1 MHz (enables small inductors) High efficiency with PFM (light load) and FPWM (constant frequency) options Integration & Ease of Use Synchronous rectification (integrated high-side & low-side MOSFETs) Internal compensation (no complex external tuning) Minimal external components required Small SOT-23-6 package for compact designs Protection & Reliability Cycle-by-cycle current limit Short-circuit protection (hiccup mode) Thermal shutdown protection Undervoltage lockout (UVLO) ±1% reference voltage accuracy Automotive & Industrial Capability AEC-Q100 qualified (automotive grade) Operating temperature: Ambient: up to 125°C Junction: up to 150°C Designed for rugged automotive environments Additional Features Soft-start for controlled startup Precision enable pin for system control Monotonic startup with pre-biased output Available in fixed output (e.g., 5 V) variants Typical Applications Automotive electronics (ADAS, infotainment, lighting) Industrial power supplies Distributed power systems General-purpose DC-DC regulation #commonpartslibrary #integratedcircuit #powermanagement #voltageregulator

Buck DC/DC Converter, 2A, 3.3V Output Voltage, 4.5-40V Input Voltage Buck DC/DC converter SOIC*3.9x4.9mm*P1.27mm*

Isolated RS485/RS422 Transciever,Integrated Isolated DC-DC Converter, 500kbps,SO-20 #Interface #UART #commonpartslibrary

18V, 5A Synchronous Buck-Boost DC/DC Converter 28-QFN #CommonPartsLibrary #IntegratedCircuits #BatteryChargers #LTC3119

Flyback Converters For For DC/DC Converters SMPS Transformer 1500Vrms Isolation 50kHz Surface Mount #commonpartslibrary #transformer #flyback #converter #dcdc

Isolated Module DC DC Converter 1 Output 5V 1.2A 18V - 36V Input #commonpartslibrary #powersupplies #dcdc #converter

Linear Regulator Replacement DC DC Converter 1 Output 3.3V 1.5A 4.5V - 28V Input #commonpartslibrary #powersupply #dcdc #converter

3 Watt DC/DC converter, industrial, 2:1 input, regulated, 1600 VDC I/O-isolation, encapsulated, SIP-8 Isolated Module DC DC Converter 1 Output 5V 600mA 18V - 36V Input #power-supply #DCDC-converter #TMR3

3.8-V to 36-V, 3-A synchronous step-down voltage converter Buck Switching Regulator IC Positive Adjustable 1V 1 Output 3A 12-PowerVFQFN The LMR33630-Q1 automotive-qualified regulator is an easy-to-use, synchronous, step-down DC/DC converter that delivers best-in-class efficiency for rugged applications. The LMR33630-Q1 drives up to 3 A of load current from an input of up to 36 V. The LMR33630-Q1 provides high light load efficiency and output accuracy in a very small solution size. Features such as a power-good flag and precision enable provide both flexible and easy-touse solutions for a wide range of applications. The LMR33630-Q1 automatically folds back frequency at light load to improve efficiency. Integration eliminates most external components and provides a pinout designed for simple PCB layout. Protection features include thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, and hiccup short-circuit protection. The LMR33630-Q1 is available in a 12-pin 3 mm × 2 mm next generation VQFN package with wettable flanks • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation available to aid functional safety system design • Configured for rugged automotive applications – Input voltage range: 3.8 V to 36 V – Output voltage range: 1 V to 24 V – Output current: 3 A – 75-mΩ/50-mΩ RDS-ON power MOSFETs – Peak-current-mode control – Short minimum on-time of 68 ns – Frequency: 400 kHz, 1.4 MHz, 2.1 MHz – Integrated compensation network • Low EMI and switching noise – HotRod™ package – Parallel input current paths • High power conversion at all loads – Peak efficiency > 95% – Low shutdown quiescent current of 5 µA – Low operating quiescent current of 25 µA #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LMR33630

Isolated Module DC DC Converter 1 Output 5V 200mA - 5V Input #commonpartslibrary #powersupply #dcdc #converter

Isolated PoE Module DC DC Converter Output 12V 2.5A 50V - 57V Input #commonpartslibrary #module #dcdc #converter

Non-Isolated PoL Module DC DC Converter 1 Output 3.3V 3A 3V - 17V Input #commonpartslibrary #powersupply #dcdc #converter

Non-Isolated PoL Module DC DC Converter 1 Output 5V, -5V 2A, 1A 8V - 30V Input #commonpartslibrary #powersupply #dcdc #converter

Isolated Module DC DC Converter 1 Output 5V 600mA 9V - 36V Input #commonpartslibrary #powersupply #dcdc #converter

Isolated Module DC DC Converter 1 Output 5V 200mA 4.5V - 5.5V Input #commonpartslibrary #powersupply #dcdc #converter

Isolated Module DC DC Converter 2 Output 15V -15V 1A, 1A 18V - 36V Input #commonpartslibrary #powersupply #dcdc #converter

Isolated Module DC DC Converter 2 Output 15V -15V 500mA, 500mA 9V - 36V Input #commonpartslibrary #powersupply #dcdc #converter

Isolated Module DC DC Converter 1 Output 3.3V 303mA 3V - 3.6V Input #commonpartslibrary #powersupply #dcdc #converter

Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 6V 10A 6V - 20V Input The LMZ22010TZ/NOPB is a compact, high-efficiency step-down (buck) DC-DC power module from Texas Instruments. It integrates a switching regulator, power MOSFETs, inductor, and compensation components into a single package, simplifying power supply design. This module is capable of delivering up to 10A output current with excellent thermal performance and minimal external components. It is intended for high power density applications such as industrial systems, telecommunications equipment, and embedded processing platforms. Manufacturer Information Manufacturer: Texas Instruments Part Number: LMZ22010TZ/NOPB Product Type: DC-DC Buck Power Module Key Features Integrated power module with inductor and controller Output current up to 10A Wide input voltage range High efficiency operation Adjustable output voltage Built-in protection features (thermal shutdown, overcurrent protection) Power-good output and enable control Requires minimal external components Electrical Characteristics Parameter Value Input Voltage Range 6 V to 20 V Output Voltage Range 0.8 V to 6 V (adjustable) Output Current Up to 10 A Switching Frequency ~500 kHz Efficiency Up to ~95% Operating Temperature Range -40°C to +125°C Package Information Package Type: TO-PMOD (Power Module) Mounting Type: Surface Mount Integrated inductor and power components Optimized for thermal performance Pin Configuration (Typical) Pin Name Description VIN Input supply voltage VOUT Regulated output voltage GND Ground EN Enable input FB Feedback for output adjustment PGOOD Power-good indicator Typical Applications Industrial automation systems Telecom and networking equipment FPGA / DSP / processor power rails Embedded systems Point-of-load regulation Design Considerations Ensure proper PCB layout for heat dissipation Use appropriate input/output capacitors External resistors required to set output voltage Consider airflow for high-current operation #commonpartslibrary #powersupply #dcdc #converter

400mA Step-Up DC/DC Converter with Maximum Power Point Control and 250mV Start-Up 12-MSOP #CommonPartsLibrary #IntegratedCircuits #BatteryChargers #LTC3105