This is a QRE1113 opto-reflective sensor module, using a 47K pull-up resistor (R2) and a 100 Ohm resistor (R1). It includes a 1µF capacitor (C1) for stability and attaches to a JST connector (J1) for easy interfacing. Power is provided via VCC, with the output signal (OPTO_OUT) fed back. #OpticalSensor #industrialSensing #reusable #module #industrialsensing #onsemi #sublayout

This is a reference design project for a battery charger based on the RT9525 battery charger IC from Richtek. Some key components are the IC itself (U1), various capacitors (like C1, C2, C3, C4), resistors (R1, R2, R3, R4), LEDs, and connectors. The circuit connects via battery, system voltage and various enable signals. #project #Template #charger #reusable #module #batterycharger #template #bms #monitor #RT9525 #richtek

Bipolar (BJT) Transistor Array 2 PNP (Dual) Matched Pair 65V 100mA 175MHz 380mW Surface Mount 6-TSOP The BCM856DS,115 is a dual matched PNP bipolar junction transistor (BJT) housed in a compact SOT-363 (SC-88) 6-pin surface-mount package. It consists of two independent PNP transistors with closely matched electrical characteristics, making it suitable for differential amplifier stages, current mirrors, and signal processing applications where symmetry and thermal tracking are important. Key Features Dual PNP transistor configuration in a single package Matched transistor pair for improved circuit stability Low collector-emitter saturation voltage High current gain consistency between channels Compact SOT-363 (SC-88) package for space-constrained designs Suitable for low-power and signal-level applications Electrical Characteristics (typical values unless otherwise noted) Collector-Emitter Voltage (VCEO): -45 V Collector-Base Voltage (VCBO): -50 V Emitter-Base Voltage (VEBO): -5 V Continuous Collector Current (IC): -100 mA per transistor Power Dissipation (Ptot): ~250 mW total DC Current Gain (hFE): 100 to 300 Transition Frequency (fT): ~100 MHz Package Information Package Type: SOT-363 (SC-88) Mounting: Surface Mount Pin Count: 6 Configuration: Dual PNP (E1, B1, C2, E2, B2, C1 pin arrangement depending on layout) Applications Differential amplifier input stages Current mirror circuits Signal amplification Analog front-end designs Matched pair transistor applications Additional Notes The two transistors are thermally coupled within the same package, improving matching over temperature variations Ideal for precision analog circuits requiring closely matched transistor characteristics Commonly used in compact and high-density PCB layouts #commonpartslibrary #transistor #bjt #pnp

Diode Standard 75 V 150mA Surface Mount SOD-323 #commonpartslibrary #diode

Connector Header Through Hole 2 position 0.100" (2.54mm) #commonpartslibrary #connector

17V Clamp 5A (8/20µs) Ipp Tvs Diode Surface Mount SOT-23-6 #commonpartslibrary #circuitprotection #tvsdiode

8 Position Header Connector 0.100" (2.54mm) Through Hole Gold 1x8 female header 2.54mm through hole #CommonPartsLibrary #Connector #Header #PPPC081

4.5V~5.5V 1 1 5.5ns@5V,15pF 10uA SOT-23-5 Buffers, Drivers, Receivers, Transceivers RoHS The SN74AHCT1G125 device is a single bus buffer gate/line driver with 3-state output. The output is disabled when the output-enable (OE) input is high. When OE is low, data is passed from the A input to the Y output. • Operating Range of 4.5 V to 5.5 V • Max tpd of 6 ns at 5 V • Low Power Consumption, 10-µA Max ICC • ±8-mA Output Drive at 5 V • Inputs are TTL-Voltage Compatible • Latch-Up Performance Exceeds 250 mA Per JESD 17 2 Applications • Wireless Infrastructure • Servers • Power Infrastructure • PCs/Notebooks • Programmable Logic Controllers • Tests and Measurements #CommonPartsLibrary #IntegratedCircuit

100 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold