Buck Converter Input Voltage: 220VAC Input Power: 30W AC Frequency : 50/60Hz Power Factor: 0.5 LED Output Voltage: 160V LED Output Current: 170mA Driver Efficiency : 93% Switching Frequency : 200kHz Output Current after diode bridge rectifier : 100mA Output Voltage after diode bridge rectifier : 310VDC

Welcome to your new project. Imagine what you can build here.

Here is a simple USB powered lamp that can be used to light your desktop during power failures. The circuit operates from the 5 Volt available from the USB port. The 5V from the USB port is passed through current limiting resistor R2 and transistor Q1. The base of transistor Q1 is grounded via R1 which provides a constant bias voltage for Q1 together with D2. The diode D1 prevents the reverse flow of current from battery. C1 is used as a noise filter. Two white LED’s are used here for the lamp, you can also use a 2 V torch bulb instead of LED’s. LED D3 indicates connection with USB port.

Here is a simple USB powered lamp that can be used to light your desktop during power failures. The circuit operates from the 5 Volt available from the USB port. The 5V from the USB port is passed through current limiting resistor R2 and transistor Q1. The base of transistor Q1 is grounded via R1 which provides a constant bias voltage for Q1 together with D2. The diode D1 prevents the reverse flow of current from battery. C1 is used as a noise filter. Two white LED’s are used here for the lamp, you can also use a 2 V torch bulb instead of LED’s. LED D3 indicates connection with USB port.

Welcome to your new project. Imagine what you can build here.ac bulb on and off with lpc 2129 microcontroller .