Production-ready ESP32-based HDMI + USB 8-bit gaming console using ESP32-WROOM-32E, ADV7513BSWZ HDMI transmitter, FT232RL USB bridge, W25Q32JV external flash, LMR50410 buck regulator, and TLV75801 LDO, with full decoupling, ESD protection, TMDS termination, HDMI/USB/power/programming connectors, buttons, LEDs, and audio, optimized for JLCPCB PCBA #ESP32 #HDMI #USB #GamingConsole #SchoolProject

Production-ready ESP32-based HDMI + USB 8-bit gaming console using ESP32-WROOM-32E, ADV7513BSWZ HDMI transmitter, FT232RL USB bridge, W25Q32JV external flash, LMR50410 buck regulator, and TLV75801 LDO, with full decoupling, ESD protection, TMDS termination, HDMI/USB/power/programming connectors, buttons, LEDs, and audio, optimized for JLCPCB PCBA #ESP32 #HDMI #USB #GamingConsole #SchoolProject

USB-C PD-Sink Interface with Molex 105444-0001 Phone Port, TPS25751 Power Delivery, TPS22917 Load Switching, FT601Q-B-T USB Data Bridge, and MicroSD with ESD Protection

A Framework laptop expansion module using the mcp2221a USB to I²C/UART bridge ic

USB‑C UFP USB 3.0 to SATA Bridge Using TI TUSB9261 with W25Q80DV Firmware Flash, 25 MHz Oscillator, Ultra‑Low Capacitance USB ESD Protection, and 1 A 5V‑to‑3.3V Buck Regulator

FT232R USB 2.0 to UART (RS232) Bridge Interface Evaluation Board #commonpartslibrary #developmentboard #kits #evaluationboard #uart #UM232R

Template for Raspberry Pi 5 Model Shield. Include an official pinout so you will always know Raspberry Pi names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Raspberry Pi itself along with the board outline on the silkscreen. #RaspberryPi #Raspberry #RaspberryPi5 #raspberry #Pi #RPi #Shield #template #project #project-template

EcoCore ESP32 Reference Board – Final Net Mapping, Protection Ratings, 4-Layer PCB Prep, and Integrated USB-C Programming Interface with USB-UART Bridge, CC Pull-Downs, Low-Capacitance ESD Protection, and Isolated USB 5V / 5V Actuator / 12V Rails (with Verified DRC/ERC Status and Pre-Production Layout Checklist)

USB-C to SATA portable external hard drive enclosure controller. Architecture includes USB Type-C 5 V sink input with 5.1 kΩ CC pull-downs, VBUS ESD/TVS and overcurrent protection, USB 3.2 Gen1 SuperSpeed differential pairs into a USB-to-SATA bridge, SATA data and power output for a 2.5-inch drive, regulated 3.3 V logic rail with optional 1.8 V rail if required by the bridge, 25 MHz reference clock, power/activity LEDs, and test points. Design target is compact portable use with stable spin-up power delivery, low EMI, controlled-impedance high-speed routing, and production-grade BOM options.