SIM Card Connectors TF PUSH TF-SMD_TF-PUSH LCSC Part Number: C393941 JLCPCB Part Class: Extended Part Manufactured by SHOU HAN(首韩)

A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. SWITCH TACTILE SPST-NO 0.05A 24V

A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated.

A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. SWITCH TACTILE SPST-NO 0.05A 24V

A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated.

SMD SMT button

Push Button 6mm 7.3mm Square Plunger 50mA Brick nogging 6.3mm SPST 24V SMD,6.3x6x7.3mm Tactile Switch

PCB terminal block; pitch 3.5mm; 2-ways; oblique entry; range wire 0.2-2.5mm2 (AWG 26-16) The DG250-3.5-02P-11-00A(H) is a 2-position PCB terminal block connector designed for secure wire-to-board connections. It uses a spring clamp (push-in) mechanism, allowing easy wire insertion and reliable electrical contact without screws. This connector is commonly used in: Power input terminals Signal wiring interfaces Industrial and embedded PCB applications It features a 3.5 mm pitch and a 45° angled entry, making it suitable for compact PCB layouts where space and cable routing are critical. Key Features Electrical Characteristics Rated Voltage: up to 400V Rated Current: up to 5A Mechanical & Connection Number of Pins: 2 (1×2 configuration) Pitch: 3.5 mm Mounting Type: Through-hole (THT) Wire Connection: Spring clamp / push button type No screwdriver required Wire Size: ~22–16 AWG (0.2–1.5 mm²) Physical Design Orientation: 45° angled (easier cable routing) Compact size: suitable for dense PCB layouts Body Material: Polyamide (PA66) Flammability Rating: UL94V-0 (fire-resistant) Contact & Reliability Contact Material: Phosphor bronze Plating: Tin-plated (good conductivity + corrosion resistance) Operating Temperature: −40 °C to +105 °C #commonpartslibrary #connector #terminalblock #tht

Tactile Switch SPST-NO Top Actuated Surface Mount The B3FS-1002P is a compact, surface-mount tactile switch designed for low-profile input applications. It provides a momentary contact mechanism with a distinct tactile feedback, making it suitable for user interface controls in consumer electronics, industrial devices, and compact embedded systems. The switch features a sealed construction for improved reliability and is optimized for automated PCB assembly processes. Mechanical Characteristics Mounting Type: Surface Mount (SMD) Actuator Style: Top push Actuator Height: Low profile Outline: Rectangular compact body Terminal Type: Gull-wing terminals Sealing: Dust-resistant (sealed construction) Electrical Characteristics Switch Type: Single Pole Single Throw (SPST) Contact Configuration: Normally Open (NO) Rated Voltage: Low voltage DC applications Rated Current: Suitable for signal-level switching Contact Resistance: Low initial contact resistance Insulation Resistance: High insulation resistance between terminals Operating Characteristics Operating Force: Standard tactile force (manufacturer-defined variant) Travel Distance: Short stroke tactile action Operating Life: High durability for repeated actuation cycles Bounce Time: Minimal contact bounce for reliable switching Environmental Characteristics Operating Temperature Range: Wide operating range suitable for consumer and industrial use Storage Temperature Range: Standard electronic component storage conditions Humidity Resistance: Designed to withstand typical ambient humidity conditions Material & Construction Actuator Material: High-strength polymer Housing Material: Heat-resistant plastic Contact Material: Metal alloy with surface plating for durability Terminal Finish: Solderable finish compatible with reflow soldering Packaging Information Packaging Type: Tape and reel Assembly Compatibility: Fully compatible with automated pick-and-place and reflow processes Applications Consumer electronics (keypads, remote controls) Industrial control panels Portable devices Embedded system user interfaces Wearable and compact electronics #commonpartslibrary #switch #tactile

10 (8 + 2) Position Card Connector Secure Digital - microSD™ Surface Mount, Right Angle Gold microSD socket push push The DM3AT-SF-PEJM5 is a low-profile, surface-mount microSD card connector from Hirose Electric featuring a push-push insertion and ejection mechanism. Designed for compact and portable electronic devices, it supports standard microSD, microSDHC, and microSDXC cards. The connector provides reliable electrical contact through gold-plated copper alloy terminals and is rated for up to 10,000 insertion/removal cycles, ensuring long-term durability. With a right-angle SMT configuration, integrated card detection switch, and robust mechanical retention, this connector is well-suited for applications such as embedded systems, IoT devices, consumer electronics, and industrial equipment where space efficiency and dependable card interfacing are critical. Product Category: Memory Card Connectors Product Type: Card Connector Subcategory: Memory Connectors & Sockets Card Type: microSD Number of Contacts: 8 Number of Rows: 1 Pitch: 1.1 mm Mounting Type: PCB Mount Mounting Style: Standard Orientation: Right Angle Termination Style: SMD/SMT Insertion / Extraction Style: Push-Push Mating Cycles: 10,000 Current Rating: 500 mA Voltage Rating: 125 VAC Contact Material: Copper Contact Plating: Gold Housing Material: Liquid Crystal Polymer (LCP) Insulation Resistance: 1 GΩ Height: 1.68 mm Length: 13.85 mm Operating Temperature Range: -25°C to +85°C Color: Black Packaging Options: Reel, Cut Tape, MouseReel Factory Pack Quantity: 1500 RoHS Compliance: Yes Country of Origin: China Country of Assembly: China Country of Diffusion: China Unit Weight: 0.003527 oz #commonpartslibrary #connector #memory #cardsocket #microsd