• ESP32 ROBOT CONTROLLER

    ESP32 ROBOT CONTROLLER

    Control board for autonomous or radio-controlled robots. It has inputs to connect distance sensors and encoders for autonomous mode. It can be radio controlled by the ESP32 bluetooth or by connecting a Flysky RC controller receiver to the IBUS port. It also has 3 push buttons and you can connect some kind of display by I2C to visualize and select configuration modes.

    jr98

    1 Comment

    78 Stars

  • ESP32 Battery Management System Controller Board

    ESP32 Battery Management System Controller Board

    ESP32 Battery Management System Controller Board – An innovative solution for smart power control and audio recording integration. This cutting-edge board harnesses the power of the ESP32 microcontroller to deliver precise battery management and seamless integration with an S3 Voice Recorder subsystem. Perfect for advanced IoT applications, the board’s robust design ensures reliable energy optimization, remote monitoring, and real-time performance coupled with high-quality voice recording capabilities. Experience enhanced connectivity, efficient power regulation, and smart audio functionality, all in one compact package that paves the way for next-generation smart devices. #ESP32 #BatteryManagement #VoiceRecorder #IoT #SmartDevices #ControllerBoard

    jharwinbarrozo

    &

    195 Comments

    45 Stars

  • ArduinoMicro-MidiFreak

    ArduinoMicro-MidiFreak

    Arduino Micro - MIDI Controller It uses the Arduino Micro as USB midi controller. It has 1 capacitive touch octave (12 Keys), 2 rotary encoders, a button, and a proximity sensor that can be used as a mod wheel, sustain pedal or MPE. The oled screen displays the different configuration options. It can be set to any channel or C.C. so it can be used to modify other instruments behavior. The capacitive touch keys can also be used as 12 drum machine pads.

    ebarranco

    35 Comments

    22 Stars

  • MIDI controller PCB

    MIDI controller PCB

    This device will be connected to computer through type-C and recognize as MIDI device. User can change two effects(A and B) from lists, effect speed(Tempo) and volume. #audioDevices

    vasy_skral

    &

    84 Comments

    20 Stars

  • BMS

    BMS

    DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes. Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations

    adrian95

    &

    157 Comments

    14 Stars

  • ExcaliPad-Project

    ExcaliPad-Project

    Personalized keyboard controller based on the ATMEGA32U4 and Arduino-compatible. Designed with USB-C connection and features a 2-Axis Switch Thumb Joystick by @sparkfun and tactile switches.

    vasy_skral

    32 Comments

    11 Stars

  • STM32F4 Flight Controller Template

    STM32F4 Flight Controller Template

    STM32F4-based flight controller featuring a 6-axis IMU (accelerometer + gyroscope) for stable flight dynamics and a MAX7456EUI OSD generator for real-time video overlay of flight telemetry. #drone #flightController #STM32F405 #controller #OSD #video #referenceDesign #project #MPU6000 #template

    vasy_skral

    &

    8 Stars

  • ESP32 ROBOT CONTROLLER

    ESP32 ROBOT CONTROLLER

    Control board for autonomous or radio-controlled robots. It has inputs to connect distance sensors and encoders for autonomous mode. It can be radio controlled by the ESP32 bluetooth or by connecting a Flysky RC controller receiver to the IBUS port. It also has 3 push buttons and you can connect some kind of display by I2C to visualize and select configuration modes.

    flux

    &

    6 Stars

  • Pulse Width Modulation (PWM) Controller

    Pulse Width Modulation (PWM) Controller

    This project is a Pulse Width Modulation (PWM) Controller, built around an LM555 timer IC. It controls a load connected to a MOSFET, with adjustments via a potentiometer, and uses capacitors, resistors and diodes for various functions. #PWM #controller #project #Template #projectTemplate

    vasy_skral

    88 Comments

    5 Stars

  • W5500 PoE Project

    W5500 PoE Project

    10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

    vasy_skral

    &

    37 Comments

    5 Stars

  • 8 relay controller for xiao

    8 relay controller for xiao

    Xiao could be a good way to mod your house or machines, with a simple relay controller to rule the wires.

    ericspan

    77 Comments

    4 Stars

  • ESP32 RS485 (Modbus) Controller Reference Design

    ESP32 RS485 (Modbus) Controller Reference Design

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation, and headers for connecting sensors and actuators. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated #reference-design #polygon

    vasy_skral

    22 Comments

    4 Stars

  • PICO Smart Automation Controller NextPCB 1-4 Layer Standard Constraints

    PICO Smart Automation Controller NextPCB 1-4 Layer Standard Constraints

    Use this template if you plan to get your 1-4 layer boards manufactured with HQ NextPCB (nextpcb.com). This template is designed for generic designs to minimize unnecessary costs and complications where possible. https://www.nextpcb.com/pcb-capabilities #project-template #template #manufacturer-design-rules

    vasy_skral

    &

    4 Stars

  • ESP8266 Motor Controller

    ESP8266 Motor Controller

    jharwinbarrozo

    4 Stars

  • Biskuit AI: Project Showcase

    Biskuit AI: Project Showcase

    Kitchen LED Strip Motion & Ambient-Light Controller with 12 V PWM Dimming, PIR Sensor, Ambient Light Sensor, MCU Control, Buck Regulator, and Protection Circuits (TVS, PTC Fuse, Reverse-Polarity Diode) #KitchenLEDController #MotionDetection #AmbientLightSensor

    collinsemasi

    56 Comments

    4 Stars

  • LoRa Telemetry + GPS Template

    LoRa Telemetry + GPS Template

    This project is a LoRa telemetry with ATGM336H GNSS controlled by ESP32-S2-mini Template #drone #LoRa #rfm9x #ESP32 #controller #referenceDesign #project #template #ATGM336H #GNSS

    vasy_skral

    4 Comments

    4 Stars

  • ESP32-S3 AI FPV Camera

    ESP32-S3 AI FPV Camera

    This is an AI camera board for FPV drones based on the ESP32-S3. ESP32 processes all the data using AI and sends commands to the controller via UART. #FPV #AI #uart #ESP32 #S3 #arduino #drone

    vasyl

    &

    11 Comments

    3 Stars

  • ArduinoMicro-MidiFreak-PB

    ArduinoMicro-MidiFreak-PB

    Arduino Micro - MIDI Controller It uses the Arduino Micro as USB midi controller. It has 1 capacitive touch octave (12 Keys), 2 rotary encoders, a button, and a proximity sensor that can be used as a mod wheel, sustain pedal or MPE. The oled screen displays the different configuration options. It can be set to any channel or C.C. so it can be used to modify other instruments behavior. The capacitive touch keys can also be used as 12 drum machine pads.

    datnapafunk

    6 Comments

    3 Stars

  • WLED RGB LED DRIVER.

    WLED RGB LED DRIVER.

    Compact ESP32-S3 Camera Controller with Joystick, LiPo & USB-C (XIAO Footprint)

    seeedstudio

    &

    1 Comment

    3 Stars

  • 7-Segment Controller Rev B

    7-Segment Controller Rev B

    This is a 7-segment controller. It runs on a 3-bit counter so the count is from 0-7. Buttons to toggle reset, pause, increment. Knobs to control speed and lighting configuration. Try the simulation here: https://www.flux.ai/jbreidfjord-dev/7-seg-3-bit-counter

    jlamflux

    38 Comments

    2 Stars

  • MPPT Solar Charge Controller

    MPPT Solar Charge Controller

    10A MPPT Solar Charge Controller with dual USB ports using Low-power 32bit ARMCortex-M0+ MCU (STM32L072). Expandable via Olimex Universal Extension Connector (UEXT) featuring I2C

    adrian95

    20 Comments

    2 Stars

  • Vending Machine Controller

    Vending Machine Controller

    Controller for vending machine. Use stm32f407, pressure sensor HX711, FRAM, TFT display connectivity.

    adrian95

    &

    3 Comments

    2 Stars

  • PC Game Controller Any Help?

    PC Game Controller Any Help?

    I don't want to buy an Xbox Controller, so I'm just making one by myself

    afnailon

    &

    +4

    2 Stars

  • MIDI controller PCB

    MIDI controller PCB

    This device will be connected to computer through type-C and recognize as MIDI device. User can change two effects(A and B) from lists, effect speed(Tempo) and volume.

    oozliuoo

    &

    +2

    5 Comments

    2 Stars

  • EV5920-5048-V-00A Evaluation Board

    EV5920-5048-V-00A Evaluation Board

    This is a recreation of the [EV5920-5048-V-00A](https://www.monolithicpower.com/en/ev5920-5048-v-00a.html) from MPS which demonstrates a MP5920 Hot-Swap controller commanding 5 MP5048 e-fuses in parallel. WIP Items: -Routing In flux, this project demonstrates hierarchal design through the use of modules. Additionally, parametric symbols are used extensively to improve schematic cleanliness. Components in the canvas are locked because their positions correspond to the same positions as the original layout. Changelog from Original MPS Design: - Not including GPIO2 or GPIO3 as included in the original board due to NC pin name on the IC. - PC1 and PC2 footprints are 5mm in pitch and 12.5mm in diameter rather than the 16mm diameter in the original layout. This change corresponds with the selected part more accurately. -Renamed Designators to be More Verbose

    markwuflux

    1 Comment

    2 Stars

  • ESP32 IMU Template

    ESP32 IMU Template

    This project is a small 100mm X 100mm quadcopter controlled by ESP32 and MPU-6050 Template #drone #motorController #ESP32 #controller #motor #helicopter #referenceDesign #project #quadcopter #MPU6050 #template

    vasy_skral

    2 Stars

  • 3DO In-Game Reset Mod

    3DO In-Game Reset Mod

    A simple 3DO in-game reset mod. MCU sniffs controller data and fires a reset signal to the console when L+R+X+P buttons are pressed.

    robertdalesmith

    2 Stars

  • ATTINY841 BMS

    ATTINY841 BMS

    DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes. Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations

    flux

    &

    2 Stars

  • 7-Segment Controller

    7-Segment Controller

    This is a 7-segment controller. It runs on a 3-bit counter so the count is from 0-7. Buttons to toggle reset, pause, increment. Knobs to control speed and lighting configuration. Try the simulation here: https://www.flux.ai/jbreidfjord-dev/7-seg-3-bit-counter

    jlamflux

    57 Comments

    1 Star

  • ESP32 Robot Controller

    ESP32 Robot Controller

    Control board for autonomous or radio-controlled robots. It has inputs to connect distance sensors and encoders for autonomous mode. It can be radio controlled by the ESP32 bluetooth or by connecting a Flysky RC controller receiver to the IBUS port. It also has 3 push buttons and you can connect some kind of display by I2C to visualize and select configuration modes. Forked from original project: https://www.flux.ai/jr98/esp32-robot-controller

    jharwinbarrozo

    18 Comments

    1 Star

  • Pulse Width Modulation (PWM) Controller

    Pulse Width Modulation (PWM) Controller

    This project is a Pulse Width Modulation (PWM) Controller, built around an LM555 timer IC. It controls a load connected to a MOSFET, with adjustments via a potentiometer, and uses capacitors, resistors and diodes for various functions. #PWM #controller #project #Template #projectTemplate

    anchal23

    &

    +2

    11 Comments

    1 Star

  • STM32F4 Flight Controller Template oB1U

    STM32F4 Flight Controller Template oB1U

    This is a STM32F4 Flight Controller template with 6-axis Accelerometer, Gyroscope. With OSD generator MAX7456EUI. #drone #flightController #STM32F405 #controller #OSD #video #referenceDesign #project #MPU6000 #template

    selcukc

    1 Comment

    1 Star

  • BLE Controller Template 5p8p

    BLE Controller Template 5p8p

    This is a BLE Controller project based on E73-2G4M04S1A module with SoC nRF52810 on board. Can be used to control RC cars, robots, planes, drones, etc #robotics #nRF52810 #E73 #Ebyte #BLE #referenceDesign

    tbartelmess

    1 Comment

    1 Star

  • ESP32 RS485 (Modbus) Controller Module 02e3 8a70 11db

    ESP32 RS485 (Modbus) Controller Module 02e3 8a70 11db

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    tyson0906

    1 Comment

    1 Star

  • Qwiic PC Fan Controller

    Qwiic PC Fan Controller

    The Qwiic PC Fan Controller allows you easily control almost any PC fan over the Qwiic bus using the on board ATtiny microcontroller and control firmware. The control firmware monitors the tachometer output of the fan in order to implement PI Control over the fan speed, allowing you to set your desired speed in real units.

    adrian95

    &

    1 Comment

    1 Star

  • SMC3 3DOF Motion Controller

    SMC3 3DOF Motion Controller

    Arduino-compatible SMC3/SimTools 3-DOF motion controller for three 12 V worm-drive motors, Hall feedback sensors, dual USB-C interfaces, and E-stop safety input.

    evanrowlands

    1 Star

  • STM32 CAN Stepper Controller

    STM32 CAN Stepper Controller

    Standalone STM32F446RE-header CAN/RS485 stepper motor controller PCB with external 5V input, 3.3V logic rail, CAN protection, SWD/reset, level-shifted STEP/DIR/ENABLE outputs, and split-ready modular layout.

    kaanolgun

    1 Star

  • Industrial Welding IoT Controller

    Industrial Welding IoT Controller

    Industrial Welding IoT Controller — schematic and placement preserved; PCB routing cleanup still required before manufacturing.

    genzzprotech

    1 Star

  • ESP32-S3 Handheld Controller

    ESP32-S3 Handheld Controller

    Production-intent ESP32-S3 handheld controller with USB-C sink power, ST7789 SPI TFT, 5-way controls, class-D speaker output, and factory test pads on a 4-layer PCB.

    3fathleticsllc

    1 Star

  • 110 VAC PDLC Controller

    110 VAC PDLC Controller

    110 VAC mains-input PDLC controller redesign for 25 W+ load with protected front end, rectified HV bus, auxiliary control supply, and preserved downstream square-wave output control.

    rgallizzi

    &

    1 Star

  • Bluetooth RC Car Controller

    Bluetooth RC Car Controller

    Bluetooth RC car controller using ESP32-WROOM-32E, TB6612FNG dual H-bridge, XL4015 5V buck module, DC barrel battery input, dual 2-pin motor screw terminals, 1000uF VM bulk capacitor, 100nF decoupling, 10k EN pull-up, 30 mil power traces, 10 mil signal traces, and ESP32 antenna edge keep-out.

    feliperiquelme

    1 Star

  • Nintendo Controller

    Nintendo Controller

    Original Nintendo Entertainment System (NES) controller. Just like the originals, it uses a CD4021B 8-bit shift register to send serial data of the button state to the console.

    robertdalesmith

    1 Star

  • Flight Controller

    Flight Controller

    This is a custom flight controller based around a STM32F103C8T6. It contains a BMP280 to measure the altitude of a drone, an ICM-42688-P that contains an accelerometer and gyroscope for motion control. The input voltage should be 12V and is set up to work with a LiPo battery.

    hakeem02

    1 Star

  • Arduino WS2812b Controller Shield

    Arduino WS2812b Controller Shield

    The Arduino WS2812b Controller Shield is a shield designed to offload the implementation of the WS2812b protocol to the shield. It is implemented on an ATtiny85, and the Arduino communicates with the shield over standard SPI. The code for the ATtiny85 can be found at https://github.com/k3jph/ws2812b-spi-controller

    k3jph

    1 Star

  • Midi Drumpad Controller

    Midi Drumpad Controller

    A versatile MIDI drum pad controller with 16 responsive buttons, potentiometers, and optimized circuitry, designed to seamlessly integrate into any music production setup.

    sochii

    1 Star

  • Engine Controller

    Engine Controller

    Welcome to your new project. Imagine what you can build here.

    blaravie

    12 Comments

    1 Star

  • ESP32 Robot Controller | AI Design Review Tutorial [Example] 3o6U

    ESP32 Robot Controller | AI Design Review Tutorial [Example] 3o6U

    Spot the mistake! Learn how to use AI to conduct a design review on an ESP32-based control board. This project is ideal for autonomous or radio-controller robots featuring inputs for sensors, encoders, and a Flysky RC receiver, plus an I2C display for configuration.

    dmit

    5 Comments

    1 Star

  • Resistive Touch Screen Controller - STMPE610

    Resistive Touch Screen Controller - STMPE610

    This breakout board features the STMPE610, which has both I2C and SPI interfaces available. There is also an interrupt pin that you can use to indicate when a touch has been detected to your microcontroller or microcomputer.

    adrian95

    &

    3 Comments

    1 Star

  • ✅ Raspberry Pi LEGO 9V Motor Controller

    ✅ Raspberry Pi LEGO 9V Motor Controller

    PWM-capable low-side MOSFET driver for controlling a 9 V LEGO motor from a Raspberry Pi 3.3 V GPIO signal, sized for up to 1.4 A stall/current peaks.

    dacre

    &

    1 Comment

    1 Star

  • ESP32 Robot Controller | AI Design Review Tutorial [Example]

    ESP32 Robot Controller | AI Design Review Tutorial [Example]

    Spot the mistake! Learn how to use AI to conduct a design review on an ESP32-based control board. This project is ideal for autonomous or radio-controller robots featuring inputs for sensors, encoders, and a Flysky RC receiver, plus an I2C display for configuration.

    jrvc18

    1 Comment

    1 Star