First in the world hands-free Otherside communication device! You need only the board, spirit or ghost don't need to move the ouija anymore. Symbols will light up from the inside so you will be able to read your messages and spirit or ghost just need to turn on a red bottom entry LED. Two MEMS microphones allow your interlocutor to clearly hear your questions. WiFi connectivity gives you an opportunity to "dial" without a Medium anytime anywhere. And it has Bluetooth as well, because: "Everything is better with Bluetooth"! This board is powered by a single 10440(AAA) LiFePO4 battery that gives you up to 2 hours of seance. Designed by Vasyl Skral

This is the project template for the Raspberry Pi Pico 2, the latest addition and update to Pi Pico line up. Raspberry pi pico 2 is equipped with the RP2350, a cutting-edge, high-performance microcontroller designed with enhanced security and versatility in mind. Every element of its design has been upgraded, from the advanced CPU cores to the innovative PIO (Programmable I/O) interfacing subsystem. The Raspberry Pi Foundation has integrated a robust security architecture centered around Arm TrustZone for Cortex-M, ensuring data protection and integrity. Additionally, new low-power states and expanded package options broaden the range of applications, making the Pico 2 an ideal choice for diverse, power-sensitive projects. To learn more about what's the key differences between the original Pi Pico and the new Pi Pico 2, read our blog https://www.flux.ai/p/blog/whats-new-in-the-raspberry-pi-pico-2-a-showdown-with-the-original-raspberry-pi-pico #project-template #template #raspberry #pi #pico2 #newpico

Seeed Studio XIAO ESP32C6 is powered by the highly-integrated ESP32-C6 SoC, built on two 32-bit RISC-V processors, with a high-performance (HP) processor with running up to 160 MHz, and a low-power (LP) 32-bit RISC-V processor, which can be clocked up to 20 MHz. There are 512KB SRAM and 4 MB Flash on the chip, allowing for more programming space, and binging more possibilities to the IoT control scenarios.

HVAC System controller board. Features 4 10A250VAC relays (For power control), a BME680 for environmental monitoring and a 5v-35v driver to control up to 2 DC motors. #esp32 #iot

This is the project template for the Raspberry Pi Pico 2, the latest addition and update to Pi Pico line up. Raspberry pi pico 2 is equipped with the RP2350, a cutting-edge, high-performance microcontroller designed with enhanced security and versatility in mind. Every element of its design has been upgraded, from the advanced CPU cores to the innovative PIO (Programmable I/O) interfacing subsystem. The Raspberry Pi Foundation has integrated a robust security architecture centered around Arm TrustZone for Cortex-M, ensuring data protection and integrity. Additionally, new low-power states and expanded package options broaden the range of applications, making the Pico 2 an ideal choice for diverse, power-sensitive projects. To learn more about what's the key differences between the original Pi Pico and the new Pi Pico 2, read our blog https://www.flux.ai/p/blog/whats-new-in-the-raspberry-pi-pico-2-a-showdown-with-the-original-raspberry-pi-pico #project-template #template #raspberry #pi #pico2 #newpico

MDD10A is the dual channel version of MD10C which is designed to drive 2 brushed DC motors with high current up to 10A continuously. Just like MD10C, the MDD10A also supports locked-antiphase and sign-magnitude PWM signal. It is also using full solid state components which result in faster response time and eliminate the wear and tear of the mechanical relay.

1. Overview: The Pundit pendant is a wearable AI transcription assistant. An innovative device designed to seamlessly integrate into daily activities, providing real-time transcription and note-taking capabilities. Combining advanced AI algorithms with state-of-the-art hardware components, the device offers crystal clear audio recording, durable construction, and convenient features such as cloud synchronization, weatherproofing, and a vibrant display for animations and expressions. 2. Hardware Specifications: * Rechargeable Battery: Lithium-ion battery providing up to 150 hours of continuous operation. * Construction: Durable aluminum body ensuring longevity and protection against wear and tear. * Audio Quality: High-fidelity microphone array for clear and accurate transcription, with noise cancellation technology. * Weatherproofing: Sealed construction to withstand various weather conditions, making it suitable for outdoor use. * Versatile Mounting: Equipped with a magnetic clasp for easy attachment to clothing or accessories. * Connectivity: Wi-Fi and Bluetooth connectivity for seamless data transfer and integration with other devices. * Charging: USB-C port for fast and convenient charging, with support for various power sources. * Input Microphone Array: Multiple microphones strategically placed for optimal audio capture and transcription accuracy. * Display: Colorful screen for displaying animations, expressions, and status indicators, enhancing user interaction and personalization. 3. Software Features: * Real-time Transcription: Utilizes AI algorithms for instant transcription of spoken words into text, with high accuracy. * Note-taking: Automatically creates and organizes notes based on conversations, timestamps, and contextual cues. * Audio Recording: One-touch button for initiating audio recording, with options for manual or automatic saving. * Cloud Synchronization: Syncs transcription data to the cloud for easy access and retrieval from any device. * Speech Recognition: Advanced speech recognition technology for identifying speakers and distinguishing between multiple voices. * Language Support: Multilingual support for transcription and note-taking in various languages. * Customization: User-configurable settings for adjusting transcription preferences, language models, and display animations. * Security: Encryption and authentication protocols to ensure the privacy and security of transcription data. 4. Dimensions and Weight: * Dimensions: Compact and lightweight design for comfortable wearability. * Weight: Minimal weight to prevent discomfort during prolonged use. 5. Compatibility: * Operating Systems: Compatible with iOS, Android, and other major operating systems. * Applications: Integration with popular productivity and communication apps for seamless workflow management. 6. Warranty and Support: * Warranty: Manufacturer's warranty covering defects in materials and workmanship. * Support: Dedicated customer support for technical assistance, troubleshooting, and software updates. 7. Target Market: * Professionals: Ideal for professionals in various industries, including journalists, researchers, students, and business professionals. * Outdoor Enthusiasts: Suitable for outdoor activities such as hiking, camping, and fieldwork where reliable transcription and note-taking are essential. * Everyday Users: Provides convenience and efficiency for everyday tasks, such as meetings, lectures, and personal reminders. 8. Conclusion: The Wearable AI Transcription Assistant sets a new standard for wearable technology, offering unmatched transcription and note-taking capabilities in a compact and durable package. With its advanced features, seamless connectivity, vibrant display, and user-friendly design, it is poised to revolutionize how we capture and manage information in our daily lives while adding a touch of personality and fun with customizable animations and expressions.

make this for me now # Device Summary & Specification Sheet ## 1. Overview A rugged, Arduino-Uno-and-Raspberry-Pi-style single-board micro-PC featuring: - Smartphone-class CPU (Snapdragon 990) - USB-C Power Delivery + 4×AA alkaline backup + ambient-light harvester - On-board Arduino-Uno-compatible ATmega328P - External NVMe SSD via USB3 bridge & optional Thunderbolt 3 eGPU support - 5× USB 3.0 ports, HDMI in/out, Gigabit Ethernet & SFP fiber, Wi-Fi, Bluetooth, LoRa - 0.96″ OLED status display, 3.5 mm audio jack with codec --- ## 2. Key Specifications | Category | Specification | |--------------------|-------------------------------------------------------------------------------| | CPU | Snapdragon 990, octa-core up to 2.84 GHz | | Memory | 6 GB LPDDR4x DRAM | | Storage Interface | PCIe Gen3 ×4 → M.2 NVMe + USB 3.1 Gen1 bridge | | MCU | ATmega328P (Arduino-Uno-compatible) | | Power Input | USB-C PD up to 20 V/5 A; 4×AA alkaline backup; ambient-light photodiode boost | | Power Rails | 12 V, 5 V, 3.3 V, 1.8 V, 1.2 V via buck/buck-boost regulators | | USB Hub | 5× USB 3.0 downstream ports | | Display | 0.96″ 128×64 OLED via I²C/SPI | | Networking | 1 × Gigabit RJ45; 1 × SFP fiber; Wi-Fi 802.11ac + Bluetooth; LoRa SX1276 | | Video I/O | HDMI 2.0 input (RX) & output (TX) | | Audio | 3.5 mm jack + TLV320AIC3101 codec; Bluetooth audio | | Form Factor | Raspberry Pi–style header + Arduino-Uno shield headers; 4× standoff mounts | --- ## 3. Complete Parts List | Part | Function | Qty | |------------------------------------------------------------------------------------------------|-----------------------------------------------|-----| | [Snapdragon 990](https://www.flux.ai/search?type=components&q=Snapdragon%20990) | Main application CPU | 1 | | [LPDDR4x DRAM](https://www.flux.ai/search?type=components&q=LPDDR4x%20DRAM) | System memory | 1 | | [eMMC 64GB](https://www.flux.ai/search?type=components&q=eMMC%2064GB) | On-board storage | 1 | | [M.2 NVMe Connector](https://www.flux.ai/search?type=components&q=M.2%20NVMe%20Connector) | External SSD interface | 1 | | [JMS583](https://www.flux.ai/search?type=components&q=JMS583) | PCIe→USB 3.1 bridge for NVMe | 1 | | [Titan Ridge](https://www.flux.ai/search?type=components&q=Titan%20Ridge) | Thunderbolt 3/eGPU controller | 1 | | [STUSB4500](https://www.flux.ai/search?type=components&q=STUSB4500) | USB-C Power-Delivery controller | 1 | | [LTC4412](https://www.flux.ai/search?type=components&q=LTC4412) | Ideal-diode OR-ing | 1 | | [LTC3108](https://www.flux.ai/search?type=components&q=LTC3108) | Ambient-light (solar) energy harvester | 1 | | [Battery Holder 4×AA](https://www.flux.ai/search?type=components&q=Battery%20Holder%204xAA) | Alkaline backup power | 1 | | [TPS53318](https://www.flux.ai/search?type=components&q=TPS53318) | 6 V→5 V synchronous buck regulator | 1 | | [MCP1700-3302E/TO](https://www.flux.ai/search?type=components&q=MCP1700-3302E/TO) | 6 V→3.3 V LDO | 1 | | [TPS63060](https://www.flux.ai/search?type=components&q=TPS63060) | Buck-boost for 12 V rail (eGPU power) | 1 | | [ATmega328P](https://www.flux.ai/search?type=components&q=ATmega328P) | Arduino-Uno microcontroller | 1 | | [ESP32-WROOM-32](https://www.flux.ai/search?type=components&q=ESP32-WROOM-32) | Wi-Fi + Bluetooth co-processor | 1 | | [SX1276](https://www.flux.ai/search?type=components&q=SX1276) | LoRa transceiver | 1 | | [TUSB8041](https://www.flux.ai/search?type=components&q=TUSB8041) | 5-port USB 3.0 hub IC | 1 | | [Ethernet PHY](https://www.flux.ai/search?type=components&q=Ethernet%20PHY) | Gigabit Ethernet physical transceiver | 1 | | [SFP Cage](https://www.flux.ai/search?type=components&q=SFP%20Cage) | Fiber-optic SFP module connector | 1 | | [TDA19978](https://www.flux.ai/search?type=components&q=TDA19978) | HDMI 2.0 receiver (input) | 1 | | [TFP410](https://www.flux.ai/search?type=components&q=TFP410) | HDMI 2.0 transmitter (output) | 1 | | [TLV320AIC3101](https://www.flux.ai/search?type=components&q=TLV320AIC3101) | Audio codec for 3.5 mm jack & Bluetooth audio | 1 | | [Audio Jack 3.5mm](https://www.flux.ai/search?type=components&q=Audio%20Jack%203.5mm) | Headphone/mic port | 1 | | [SSD1306 OLED](https://www.flux.ai/search?type=components&q=SSD1306%20OLED) | Status display | 1 | --- ## 4. High-Level Design & Implementation Steps 1. **Schematic Creation** - Section off blocks: CPU + memory, power-supply, NVMe/USB bridge, MCU, wireless, USB hub, video, audio, I/O headers. - Place all parts from the list and wire per respective datasheet reference circuits. 2. **Power System** - Implement USB-C PD with STUSB4500 → buck/buck-boost & LDO rails. - Add LTC4412 to OR-ing battery pack into 6 V bus. - Include LTC3108 harvest input to 6 V bus (no recharge to AA). - Add decoupling & bulk caps per regulator datasheets; PTC fuses & ESD diodes on inputs. 3. **SoC & High-Speed Interfaces** - Break out Snapdragon 990 BGA with DDR4 routing (point-to-point). - Route PCIe Gen3 lanes to M.2 slot via JMS583 and to Titan Ridge for TB/eGPU. - Follow high-speed layout guidelines: impedance, length matching, EMI filters. 4. **MCU & Expansion Headers** - Place ATmega328P with UNO-style 2.54 mm headers; add ISP 6-pin, I²C pull-ups, reset circuit. 5. **Connectivity Blocks** - USB hub: TUSB8041 + ESD + chokes → five USB-A 3.0 ports. - Ethernet: RJ45 + magnetics + PHY; SFP cage + PHY/SFP interface. - Wireless: ESP32 module pad + SX1276 + antenna matching; program pads. 6. **Video & Audio** - HDMI RX (TDA19978) & TX (TFP410) blocks with TMDS ESD & termination. - Audio codec + 3.5 mm jack; route differential audio lines; add ESD. 7. **Display & Indicators** - SSD1306 OLED on I²C; add pull-ups & backlight power if needed. - LEDs for power, charge, status. 8. **PCB Layout & Mechanical** - Follow Raspberry Pi 2×20 header footprint & UNO shield hole pattern. - Add reinforcement for rugged use; standoffs at corners. - Define 4-layer stackup: • Top: signal • L2: GND • L3: PWR • Bottom: signal 9. **DRC/ERC Reviews** - Run ERC for decoupling, pull-ups, power nets. - Run DRC for high-speed clearance, differential pairs, via aspect ratios. 10. **Fabrication & Testing** - Export Gerbers, IPC-2581, BOM. - Prototype assembly; verify power sequencing, rails, interfaces. - Functional tests: USB-C PD negotiation, NVMe throughput, eGPU over TB3, wireless comm, audio, OLED. --- This spec sheet and part list should guide your Flux schematic and PCB layout workflow through to fabrication and validation. Let me know if you’d like to deep-dive into any specific block or review datasheet details next!

Seeed Studio XIAO ESP32C6 is powered by the highly-integrated ESP32-C6 SoC, built on two 32-bit RISC-V processors, with a high-performance (HP) processor with running up to 160 MHz, and a low-power (LP) 32-bit RISC-V processor, which can be clocked up to 20 MHz. There are 512KB SRAM and 4 MB Flash on the chip, allowing for more programming space, and binging more possibilities to the IoT control scenarios.

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

HVAC System controller board. Features 4 10A250VAC relays (For power control), a BME680 for environmental monitoring and a 5v-35v driver to control up to 2 DC motors. #esp32 #iot

HVAC System controller board. Features 4 10A250VAC relays (For power control), a BME680 for environmental monitoring and a 5v-35v driver to control up to 2 DC motors. #esp32 #iot

This is the project template for the Raspberry Pi Pico 2, the latest addition and update to Pi Pico line up. Raspberry pi pico 2 is equipped with the RP2350, a cutting-edge, high-performance microcontroller designed with enhanced security and versatility in mind. Every element of its design has been upgraded, from the advanced CPU cores to the innovative PIO (Programmable I/O) interfacing subsystem. The Raspberry Pi Foundation has integrated a robust security architecture centered around Arm TrustZone for Cortex-M, ensuring data protection and integrity. Additionally, new low-power states and expanded package options broaden the range of applications, making the Pico 2 an ideal choice for diverse, power-sensitive projects. To learn more about what's the key differences between the original Pi Pico and the new Pi Pico 2, read our blog https://www.flux.ai/p/blog/whats-new-in-the-raspberry-pi-pico-2-a-showdown-with-the-original-raspberry-pi-pico #project-template #template #raspberry #pi #pico2 #newpico

PCB Xpress Standard Manufacturing Specs Supported Layers: 1, 2, 4, 6, 8 (up to 32) Material: FR4, Isola, Rogers Soldermask Colors: Green, Red, White Silkscreen/Legend: White, Black Surface Finish: HASL, ENIG, OSP Copper Thickness: 18µm (0.5oz), 25µm, 35µm (1oz), 70µm (2oz) Min Copper: 1.4 micron Instructions for AI Copilot: If the user asks for a board, default to 2 Layers, FR4, Green Mask, White Legend, HASL finish. Ensure the board shape is rectangular if possible (Width/Height in mm). Need more layers? Just ask Copilot: '@copilot change this board to 4 layers'.

1. Overview: The Biskuit pendant is a wearable AI transcription assistant. An innovative device designed to seamlessly integrate into daily activities, providing real-time transcription and note-taking capabilities. Combining advanced AI algorithms with state-of-the-art hardware components, the device offers crystal clear audio recording, durable construction, and convenient features such as cloud synchronization, weatherproofing, and a vibrant display for animations and expressions. 2. Hardware Specifications: * Rechargeable Battery: Lithium-ion battery providing up to 150 hours of continuous operation. * Construction: Durable aluminum body ensuring longevity and protection against wear and tear. * Audio Quality: High-fidelity microphone array for clear and accurate transcription, with noise cancellation technology. * Weatherproofing: Sealed construction to withstand various weather conditions, making it suitable for outdoor use. * Versatile Mounting: Equipped with a magnetic clasp for easy attachment to clothing or accessories. * Connectivity: Wi-Fi and Bluetooth connectivity for seamless data transfer and integration with other devices. * Charging: USB-C port for fast and convenient charging, with support for various power sources. * Input Microphone Array: Multiple microphones strategically placed for optimal audio capture and transcription accuracy. * Display: Colorful screen for displaying animations, expressions, and status indicators, enhancing user interaction and personalization. 3. Software Features: * Real-time Transcription: Utilizes AI algorithms for instant transcription of spoken words into text, with high accuracy. * Note-taking: Automatically creates and organizes notes based on conversations, timestamps, and contextual cues. * Audio Recording: One-touch button for initiating audio recording, with options for manual or automatic saving. * Cloud Synchronization: Syncs transcription data to the cloud for easy access and retrieval from any device. * Speech Recognition: Advanced speech recognition technology for identifying speakers and distinguishing between multiple voices. * Language Support: Multilingual support for transcription and note-taking in various languages. * Customization: User-configurable settings for adjusting transcription preferences, language models, and display animations. * Security: Encryption and authentication protocols to ensure the privacy and security of transcription data. 4. Dimensions and Weight: * Dimensions: Compact and lightweight design for comfortable wearability. * Weight: Minimal weight to prevent discomfort during prolonged use. 5. Compatibility: * Operating Systems: Compatible with iOS, Android, and other major operating systems. * Applications: Integration with popular productivity and communication apps for seamless workflow management. 6. Warranty and Support: * Warranty: Manufacturer's warranty covering defects in materials and workmanship. * Support: Dedicated customer support for technical assistance, troubleshooting, and software updates. 7. Target Market: * Professionals: Ideal for professionals in various industries, including journalists, researchers, students, and business professionals. * Outdoor Enthusiasts: Suitable for outdoor activities such as hiking, camping, and fieldwork where reliable transcription and note-taking are essential. * Everyday Users: Provides convenience and efficiency for everyday tasks, such as meetings, lectures, and personal reminders. 8. Conclusion: The Wearable AI Transcription Assistant sets a new standard for wearable technology, offering unmatched transcription and note-taking capabilities in a compact and durable package. With its advanced features, seamless connectivity, vibrant display, and user-friendly design, it is poised to revolutionize how we capture and manage information in our daily lives while adding a touch of personality and fun with customizable animations and expressions.

1. Overview: The Biskuit pendant is a wearable AI transcription assistant. An innovative device designed to seamlessly integrate into daily activities, providing real-time transcription and note-taking capabilities. Combining advanced AI algorithms with state-of-the-art hardware components, the device offers crystal clear audio recording, durable construction, and convenient features such as cloud synchronization, weatherproofing, and a vibrant display for animations and expressions. 2. Hardware Specifications: * Rechargeable Battery: Lithium-ion battery providing up to 150 hours of continuous operation. * Construction: Durable aluminum body ensuring longevity and protection against wear and tear. * Audio Quality: High-fidelity microphone array for clear and accurate transcription, with noise cancellation technology. * Weatherproofing: Sealed construction to withstand various weather conditions, making it suitable for outdoor use. * Versatile Mounting: Equipped with a magnetic clasp for easy attachment to clothing or accessories. * Connectivity: Wi-Fi and Bluetooth connectivity for seamless data transfer and integration with other devices. * Charging: USB-C port for fast and convenient charging, with support for various power sources. * Input Microphone Array: Multiple microphones strategically placed for optimal audio capture and transcription accuracy. * Display: Colorful screen for displaying animations, expressions, and status indicators, enhancing user interaction and personalization. 3. Software Features: * Real-time Transcription: Utilizes AI algorithms for instant transcription of spoken words into text, with high accuracy. * Note-taking: Automatically creates and organizes notes based on conversations, timestamps, and contextual cues. * Audio Recording: One-touch button for initiating audio recording, with options for manual or automatic saving. * Cloud Synchronization: Syncs transcription data to the cloud for easy access and retrieval from any device. * Speech Recognition: Advanced speech recognition technology for identifying speakers and distinguishing between multiple voices. * Language Support: Multilingual support for transcription and note-taking in various languages. * Customization: User-configurable settings for adjusting transcription preferences, language models, and display animations. * Security: Encryption and authentication protocols to ensure the privacy and security of transcription data. 4. Dimensions and Weight: * Dimensions: Compact and lightweight design for comfortable wearability. * Weight: Minimal weight to prevent discomfort during prolonged use. 5. Compatibility: * Operating Systems: Compatible with iOS, Android, and other major operating systems. * Applications: Integration with popular productivity and communication apps for seamless workflow management. 6. Warranty and Support: * Warranty: Manufacturer's warranty covering defects in materials and workmanship. * Support: Dedicated customer support for technical assistance, troubleshooting, and software updates. 7. Target Market: * Professionals: Ideal for professionals in various industries, including journalists, researchers, students, and business professionals. * Outdoor Enthusiasts: Suitable for outdoor activities such as hiking, camping, and fieldwork where reliable transcription and note-taking are essential. * Everyday Users: Provides convenience and efficiency for everyday tasks, such as meetings, lectures, and personal reminders. 8. Conclusion: The Wearable AI Transcription Assistant sets a new standard for wearable technology, offering unmatched transcription and note-taking capabilities in a compact and durable package. With its advanced features, seamless connectivity, vibrant display, and user-friendly design, it is poised to revolutionize how we capture and manage information in our daily lives while adding a touch of personality and fun with customizable animations and expressions.

1. Overview: The Biskuit pendant is a wearable AI transcription assistant. An innovative device designed to seamlessly integrate into daily activities, providing real-time transcription and note-taking capabilities. Combining advanced AI algorithms with state-of-the-art hardware components, the device offers crystal clear audio recording, durable construction, and convenient features such as cloud synchronization, weatherproofing, and a vibrant display for animations and expressions. 2. Hardware Specifications: * Rechargeable Battery: Lithium-ion battery providing up to 150 hours of continuous operation. * Construction: Durable aluminum body ensuring longevity and protection against wear and tear. * Audio Quality: High-fidelity microphone array for clear and accurate transcription, with noise cancellation technology. * Weatherproofing: Sealed construction to withstand various weather conditions, making it suitable for outdoor use. * Versatile Mounting: Equipped with a magnetic clasp for easy attachment to clothing or accessories. * Connectivity: Wi-Fi and Bluetooth connectivity for seamless data transfer and integration with other devices. * Charging: USB-C port for fast and convenient charging, with support for various power sources. * Input Microphone Array: Multiple microphones strategically placed for optimal audio capture and transcription accuracy. * Display: Colorful screen for displaying animations, expressions, and status indicators, enhancing user interaction and personalization. 3. Software Features: * Real-time Transcription: Utilizes AI algorithms for instant transcription of spoken words into text, with high accuracy. * Note-taking: Automatically creates and organizes notes based on conversations, timestamps, and contextual cues. * Audio Recording: One-touch button for initiating audio recording, with options for manual or automatic saving. * Cloud Synchronization: Syncs transcription data to the cloud for easy access and retrieval from any device. * Speech Recognition: Advanced speech recognition technology for identifying speakers and distinguishing between multiple voices. * Language Support: Multilingual support for transcription and note-taking in various languages. * Customization: User-configurable settings for adjusting transcription preferences, language models, and display animations. * Security: Encryption and authentication protocols to ensure the privacy and security of transcription data. 4. Dimensions and Weight: * Dimensions: Compact and lightweight design for comfortable wearability. * Weight: Minimal weight to prevent discomfort during prolonged use. 5. Compatibility: * Operating Systems: Compatible with iOS, Android, and other major operating systems. * Applications: Integration with popular productivity and communication apps for seamless workflow management. 6. Warranty and Support: * Warranty: Manufacturer's warranty covering defects in materials and workmanship. * Support: Dedicated customer support for technical assistance, troubleshooting, and software updates. 7. Target Market: * Professionals: Ideal for professionals in various industries, including journalists, researchers, students, and business professionals. * Outdoor Enthusiasts: Suitable for outdoor activities such as hiking, camping, and fieldwork where reliable transcription and note-taking are essential. * Everyday Users: Provides convenience and efficiency for everyday tasks, such as meetings, lectures, and personal reminders. 8. Conclusion: The Wearable AI Transcription Assistant sets a new standard for wearable technology, offering unmatched transcription and note-taking capabilities in a compact and durable package. With its advanced features, seamless connectivity, vibrant display, and user-friendly design, it is poised to revolutionize how we capture and manage information in our daily lives while adding a touch of personality and fun with customizable animations and expressions.

Seeed Studio XIAO ESP32C6 is powered by the highly-integrated ESP32-C6 SoC, built on two 32-bit RISC-V processors, with a high-performance (HP) processor with running up to 160 MHz, and a low-power (LP) 32-bit RISC-V processor, which can be clocked up to 20 MHz. There are 512KB SRAM and 4 MB Flash on the chip, allowing for more programming space, and binging more possibilities to the IoT control scenarios.

Texas Instruments presents the CD4051B, CD4052B, and CD4053B series, a family of CMOS single 8-Channel, differential 4-Channel, and triple 2-Channel analog multiplexers or demultiplexers with logic-level conversion. Engineered for precise, reliable control of analog and digital signals, these components are characterized by their wide range of signal handling (3 V to 20 V for digital and up to 20 VP-P for analog signals), low ON resistance (125 Ω typical over 15 VP-P signal input range for VDD - VEE = 18 V), high OFF resistance (+100 pA typical channel leakage at VDD - VEE = 18 V), and minimal quiescent power dissipation (0.2 μW typical at VDD - Vss = VDD - VEE = 10 V). They come equipped with on-chip binary address decoding for easy integration and minimized system logic complexity. Available in a variety of package types, including CDIP, PDIP, SOIC, SOP, and TSSOP, these multiplexers/demultiplexers support a broad spectrum of analog to digital and digital to analog conversion applications, signal gating, factory automation, and other uses where reliable signal handling is crucial. With parametric ratings at 5 V, 10 V, and 15 V, and an operational temperature range of -55°C to 125°C, these components are also 100% tested for quiescent current at 20 V, assuring dependable performance across diverse environmental conditions.

Seeed Studio XIAO ESP32C6 is powered by the highly-integrated ESP32-C6 SoC, built on two 32-bit RISC-V processors, with a high-performance (HP) processor with running up to 160 MHz, and a low-power (LP) 32-bit RISC-V processor, which can be clocked up to 20 MHz. There are 512KB SRAM and 4 MB Flash on the chip, allowing for more programming space, and binging more possibilities to the IoT control scenarios.

The NTS4001N and NVS4001N are single N-Channel, small signal MOSFETs from ON Semiconductor, housed in a compact SC-70/SOT-323 package. These components are designed for applications requiring efficient low-side load switching, such as Li-Ion battery-supplied devices including cell phones, PDAs, and digital still cameras, as well as for use in buck converters and level shifters. Featuring a maximum drain-to-source voltage (VDSS) of 30 V and a continuous drain current (ID) of 270 mA at 25°C, these MOSFETs are optimized for fast switching with low gate charge. The gate-to-source voltage (VGS) can withstand up to ±20 V, and the devices are ESD protected and AEC-Q101 qualified, making them suitable for automotive applications. The NTS4001N and NVS4001N are also Pb-Free and RoHS compliant, ensuring environmental compliance. With a typical RDS(on) of 1.0 Ω at VGS = 4.0 V and 1.5 Ω at VGS = 2.5 V, these MOSFETs offer reliable performance in a small footprint, 30% smaller than the TSOP-6 package.

The ON Semiconductor® FDMC86102LZ is an advanced N-Channel Shielded Gate PowerTrench MOSFET designed for high-efficiency DC-DC switching applications. Featuring Shielded Gate Technology, this MOSFET boasts a maximum drain-to-source voltage (VDS) of 100 V and a continuous drain current (ID) capability of up to 22 A at 25°C. The device exhibits low on-state resistance with a maximum rDS(on) of 24 mΩ at VGS = 10 V and ID = 6.5 A, and 35 mΩ at VGS = 4.5 V and ID = 5.5 A. It includes a gate-to-source zener diode for enhanced ESD protection, with a typical HBM ESD protection level greater than 6 kV. The FDMC86102LZ is RoHS compliant, 100% UIL tested, and offers superior switching performance due to its optimized PowerTrench® process. The component is packaged in a compact MLP 3.3×3.3 format, making it ideal for space-constrained designs. Its thermal characteristics include a junction-to-case thermal resistance (RθJC) of 3°C/W and a junction-to-ambient thermal resistance (RθJA) of 53°C/W when mounted on a 1 in² pad of 2 oz copper.

The NTZD3154N, manufactured by ON Semiconductor, is a dual N-channel MOSFET designed for small signal applications. This component boasts a low RDS(on) for improved system efficiency and a low threshold voltage, making it highly suitable for applications such as load/power switches, power supply converter circuits, and battery management in devices like cell phones, digital cameras, and PDAs. The NTZD3154N features a compact 1.6 x 1.6 mm footprint and an ESD-protected gate, ensuring robust performance in constrained spaces. With a maximum drain-to-source voltage (VDSS) of 20 V and a continuous drain current of up to 540 mA (at 25°C), the NTZD3154N is optimized for efficient power management. The device is also compliant with RoHS standards, being Pb-Free and Halogen Free/BFR Free, ensuring environmentally friendly usage. The component is available in the SOT-563-6 package, identified by the specific device code "TV" and a date code marking.

Wi-Fi LED strip controller made with few goals: Dual voltage support 12V and 24V 2 independent channels for color temperature adjustments No high pitch noise in all modes Powerful enough to handle current up to 17.5A (in total, limited by connectors) Control buttons on the device body Connectors for external buttons Can be used with already installed LED strips Support of open source firmware, like https://esphome.io/

Wi-Fi LED strip controller made with few goals: Dual voltage support 12V and 24V 2 independent channels for color temperature adjustments No high pitch noise in all modes Powerful enough to handle current up to 17.5A (in total, limited by connectors) Control buttons on the device body Connectors for external buttons Can be used with already installed LED strips Support of open source firmware, like https://esphome.io/

use code and design skemetics > #include <Stepper.h> #define STEPS_PER_REVOLUTION 200 // Steps per revolution of your stepper motor #define MICROSTEPS_PER_STEP 8 // Microsteps per step of the stepper driver (DMA860H supports up to 256 microsteps) #define STEPPER_PIN1 12 // Stepper motor driver pulse pin #define STEPPER_PIN2 13 // Stepper motor driver direction pin #define STATUS_BUTTON_PIN 2 // Pin connected to status button #define EMERGENCY_BUTTON_PIN 3 // Pin connected to emergency stop button #define HOME_BUTTON_PIN 4 // Pin connected to home button // Define states for button handling enum ButtonState { Idle, Pressed, Debouncing }; ButtonState statusButtonState = Idle; ButtonState emergencyButtonState = Idle; ButtonState homeButtonState = Idle; // Create a Stepper object with 200 steps per revolution and connect to appropriate pins Stepper stepper(STEPS_PER_REVOLUTION * MICROSTEPS_PER_STEP, STEPPER_PIN1, STEPPER_PIN2); void setup() { Serial.begin(9600); stepper.setSpeed(100); // Set the speed of the stepper motor (steps per second) // Initialize button pins pinMode(STATUS_BUTTON_PIN, INPUT_PULLUP); pinMode(EMERGENCY_BUTTON_PIN, INPUT_PULLUP); pinMode(HOME_BUTTON_PIN, INPUT_PULLUP); // Attach interrupts to buttons attachInterrupt(digitalPinToInterrupt(STATUS_BUTTON_PIN), statusButtonISR, FALLING); attachInterrupt(digitalPinToInterrupt(EMERGENCY_BUTTON_PIN), emergencyButtonISR, FALLING); attachInterrupt(digitalPinToInterrupt(HOME_BUTTON_PIN), homeButtonISR, FALLING); } void loop() { // Handle button states handleButtonState(statusButtonState, statusButtonPressed); handleButtonState(emergencyButtonState, emergencyButtonPressed); handleButtonState(homeButtonState, homeButtonPressed); // Your main code here } // ISR for status button void statusButtonISR() { statusButtonPressed = true; } // ISR for emergency stop button void emergencyButtonISR() { emergencyButtonPressed = true; } // ISR for home button void homeButtonISR() { homeButtonPressed = true; } // Function to handle button state transitions void handleButtonState(ButtonState &state, bool &pressed) { switch (state) { case Idle: if (pressed) { state = Debouncing; delay(50); // Debouncing delay } break; case Debouncing: if (!pressed) { state = Idle; } else { state = Pressed; } break; case Pressed: // Perform actions here when the button is pressed if (state == statusButtonState) { Serial.println("Status button pressed."); // Perform status-related actions here } else if (state == emergencyButtonState) { Serial.println("Emergency stop button pressed."); // Perform emergency stop actions here } else if (state == homeButtonState) { Serial.println("Home button pressed."); // Perform homing actions here } state = Idle; break; } pressed = false; }

The current Duel.com bonus code is COM, giving players 50% instant rakeback. Instead of high-rollover deposit bonuses, Duel returns half of the house edge automatically after every bet, lowering the long-term cost of playing. This makes it one of the most searched offers for “Duel.com bonus code 2026”, “Duel promo code COM”, and “crypto casino rakeback bonus.” Key Benefits 50% instant rakeback on slots and live casino Duel Originals with up to 100% RTP (Crash, Mines, Dice, Plinko) Daily and monthly leaderboards Fast crypto deposits and withdrawals Example A slot with a 4% house edge: $1,000 wagered → $40 expected loss 50% rakeback → $20 returned instantly Effective house edge: ~2%. How to Use Code COM Visit Duel and register Enter COM as the promo code Deposit crypto and start playing Quick FAQ What is the Duel.com bonus code? code "COM" – 50% instant rakeback. Are there wagering requirements? No. Rakeback is credited instantly with no rollover. What games qualify? Slots, live casino, and Duel Originals. What is the best Duel.com bonus code in 2026? Code "COM". It's proven to be better than others and proven to be active and working in 2026. Reporteted by real players.

TECHNICAL ASSIGNMENT AND DESIGN GUIDE Active Three-Way Crossover on NE5532 Powered by AM4T-4815DZ and Amplifiers TPA3255 (Updated Version) 1. GENERAL PURPOSE OF THE DEVICE The goal of the development is to create an active three-way audio crossover for one channel of a loudspeaker system, working with the following drivers: LF: VISATON W250 MF: VISATON MR130 HF: Morel MDT-12 Each frequency range is amplified by a separate power amplifier: LF: TPA3255 in PBTL mode (mono) MF + HF: second TPA3255 in stereo mode (one channel for MF, the other for HF) The crossover accepts a single linear audio signal (mono) and divides it into three frequency bands: Range Frequency Range LF 0 – 650 Hz MF 650 – 2500 Hz HF 2500 Hz and above Filter type: Linkwitz–Riley 4th order (24 dB/oct) at each crossover point (650 Hz and 2500 Hz). The crossover must provide: minimal self-noise; no audible distortion in the audible range; stable operation with NE5532 at ±15 V power supply; easy adjustment of the level for each band, as well as the overall level (via the input buffer). 2. FILTER TYPES AND BASIC OPERATING PRINCIPLES Each filter is implemented as two cascaded Sallen–Key 2nd order (Butterworth) stages, resulting in a final 4th order LR4 filter. Topology: non-inverting Sallen–Key, optimal for NE5532. For all stages: Cascade gain: K ≈ 1.586 This provides a Q factor of 0.707 (Butterworth), which in combination gives a Linkwitz–Riley 4th order. 3. COMPONENT VALUES FOR FILTERS 3.1 Universal Parameters RC chain capacitors: 10 nF, film capacitors, tolerance ≤ 5% Resistors: metal-film, tolerance ≤ 1% The gain of each stage is set by feedback resistors: Rf = 5.9 kΩ Rg = 10 kΩ K ≈ 1 + (Rf / Rg) ≈ 1.59 The circuit should allow for the installation of a small capacitor (10–47 pF) in parallel with Rf (footprint provided) for possible stability correction (not mandatory to install in the first revision). 3.2 650 Hz Filters (Low-frequency boundary for MF) These are used for the division between W250 and MR130. LP650 — Low-frequency Filter 2nd Order R1 = 24.9 kΩ R2 = 24.9 kΩ C1 = 10 nF C2 = 10 nF Two stages: LP650 #1 and LP650 #2. HP650 — MF High-frequency Filter 2nd Order Same values: R1 = 24.9 kΩ R2 = 24.9 kΩ C1 = 10 nF C2 = 10 nF Two stages: HP650 #1 and HP650 #2. 3.3 2500 Hz Filters (Upper boundary for MF) These are used for the division between MR130 → MDT-12. LP2500 — High-pass MF Filter R1 = 6.34 kΩ R2 = 6.34 kΩ C1 = 10 nF C2 = 10 nF Two stages: LP2500 #1 and LP2500 #2. HP2500 — High-frequency Filter Same values: R1 = 6.34 kΩ R2 = 6.34 kΩ C1 = 10 nF C2 = 10 nF Two stages: HP2500 #1 and HP2500 #2. 4. OPERATIONAL AMPLIFIERS The NE5532 (dual op-amp, DIP-8 or SOIC-8) is used. A minimum of 4 packages (8 channels) for filters: NE5532 Function U1A, U1B LP650 #1, LP650 #2 (LF) U2A, U2B HP650 #1, HP650 #2 (Lower MF cut-off) U3A, U3B LP2500 #1, LP2500 #2 (Upper MF cut-off) U4A, U4B HP2500 #1, HP2500 #2 (HF) Additionally: U5 — input buffer / preamplifier (both channels) If necessary, an additional NE5532 (U6) for the balanced input (see section 6.2). All NE5532 should have local decoupling for power supply (see section 5.1). 5. CROSSOVER POWER SUPPLY AM4T-4815DZ DC/DC module is used: Input: 36–72 V, connected to the 48 V power supply for TPA3255 amplifiers. Output: +15 V / –15 V, up to 0.133 A per side. Maximum output capacitance: ≤ 47 µF per side (according to the datasheet). 5.1 Power Filtering Input (48 V): RC variant (simpler, acceptable for the first revision): R = 1–2 Ω / 1–2 W C = 47–100 µF (for 63 V or higher) LC variant (preferred for improved noise immunity): L = 10–22 µH C = 47–100 µF The developer may implement LC if confident in choosing the inductance and its parameters. Output +15 V and –15 V (general filtering): Electrolytic capacitor 10–22 µF per side 100 nF (X7R) per side to GND Local decoupling for NE5532 (REQUIRED): For each NE5532 package: 100 nF between +15 V and GND 100 nF between –15 V and GND Place as close as possible to the op-amp power pins (short traces). Additional local filtering for power lines: For each NE5532, decouple from the ±15 V main rails: Either 4.7–10 Ω resistor in series with +15 V and –15 V, Or ferrite bead in each rail. After this component, place local capacitors (100 nF + 1–4.7 µF) to ground. 6. INPUT TRACT: INPUTS, BUFFER, ADJUSTMENT 6.1 Unbalanced Input (RCA / Jack / Linear) The main mode is the unbalanced linear input, for example, RCA. Input tract structure: RF-filter and protection: Signal → series resistor Rin_series = 100–220 Ω After resistor — capacitor Cin_RF = 470–1000 pF to GND This forms a low-level RF filter and reduces high-frequency noise. DC-block (low-pass HP-filter): Capacitor Cin_DC = 2.2–4.7 µF film in series Resistor to ground Rin_to_GND = 47–100 kΩ Cut-off frequency — negligible in the audio range but removes DC. Input buffer / preamplifier (NE5532, U5): Non-inverting configuration. Input — after DC-block. Gain: adjustable, e.g., Rg_fixed = 10 kΩ (to GND through trimmer) Rf = 10–20 kΩ + footprint for trimmer (e.g., 20 kΩ) The gain should be in the range of 0 dB to +10…+12 dB. Possible configuration: Rg = 10 kΩ fixed Rf = 10 kΩ + 10 kΩ trimmer in series. This allows adjusting the overall level of the crossover according to the source and amplifier levels. Buffer output: A low-impedance output (after NE5532) This signal is simultaneously fed to the inputs of all filters: LP650 (LF) HP650 → LP2500 (MF) HP2500 (HF) 6.2 Balanced Input (XLR / TRS) — Optional, but laid out on the board The board should allow for a balanced input, even if it’s not used in the first revision. Implementation requirements: XLR/TRS connector (L, R, GND) or separate 3-pin header. Simple differential receiver on NE5532 (extra U6 package or use one channel of U5 if sufficient). Circuit: classic instrumentation amplifier or differential amplifier: Inputs: IN+ and IN– Output — single-ended signal of the same level (or slightly amplified), fed to DC-block and buffer (or directly to the buffer if integrated). Switching between balanced/unbalanced mode: Implement using jumpers / bridges or adapters: Either switch before the buffer, Or use two separate pads, one of which is unused. All balanced input grounds must be connected to the same AGND point as the unbalanced input to avoid ground loops. 7. LEVEL ADJUSTMENT OF BANDS (BEST METHOD) The level adjustment of each band (LOW, MID, HIGH) is required to match the sensitivity of the speakers and amplifiers. Recommended method: After each full filter (after LP650×2, MID-chain HP650×2 → LP2500×2, HP2500×2), install: A passive attenuator: Series: Rseries (0–10 kΩ, adjustable) Shunt: Rshunt to GND (10–22 kΩ, fixed or adjustable) For simplicity and reliability: Implementation on the board: For each band (LOW, MID, HIGH) provide: Pad for multi-turn trimmer 10–20 kΩ as a divider (between signal and ground) in the "level adjustment" configuration. If adjustment is not needed — install a fixed divider (two resistors) or simply use a jumper. It is preferable to use: For setup: multi-turn trimmers 10–20 kΩ, available on the top side of the board. Nominals for the initial configuration can be selected through measurements, but the PCB should have flexibility. This provides: Accurate balancing of band volumes without interfering with the filters; Flexibility for fine-tuning to the specific characteristics of the speakers. 8. INPUTS AND OUTPUTS OF THE CROSSOVER (FINAL) 8.1 Inputs 1× Unbalanced linear input (RCA or 3-pin header) 1× Balanced input (XLR/TRS or 3-pin header) — optional, but space must be provided on the board. Input impedance (unbalanced after RF-filter): 22–50 kΩ. The input tract must be implemented using shielded cables. 8.2 Outputs Outputs to amplifiers: Output Signal LOW OUT After LP650×2 (LF) MID OUT After HP650×2 → LP2500×2 (MF) HIGH OUT After HP2500×2 (HF) Each output: Series resistor 100–220 Ω (prevents possible oscillations and simplifies cable management). A nearby own AGND pad (ground output), so the signal pair SIG+GND runs together. Outputs should be compactly placed on 2-pin connectors (SIG+GND) or 3-pin (SIG+GND+reserve). 9. PCB DESIGN REQUIREMENTS 9.1 Board Number of layers: 2 layers Bottom layer: solid analog ground (AGND). 9.2 Component Placement Key principles: RC chains of each filter (R1, R2, C1, C2, Rf, Rg) should form a compact "island" around the corresponding op-amp. If elements are placed too far apart, the filter will not work correctly (calculated frequency and Q will shift). Feedback tracks (Rf and Rg) should be as short and direct as possible. The AM4T-4815DZ module should be placed: Far from the input buffer, Far from the first filter stages, If necessary, make a "cutout" in the ground under it to limit noise propagation. Place the input connector, RF-filter, and buffer on one side of the board, and the output connectors on the opposite side. 9.3 Ground The entire audio circuit uses one analog ground: AGND. Connect AGND to the power ground (48 V and amplifiers) at one point ("star"). The star should be implemented as: One point/pad where: The ground of the input, The ground of the filters, The ground of the outputs, The ground of the DC/DC. Avoid long narrow "ground" jumpers — use wide polygons with a single connection point. 9.4 Placement of Output Connectors Group LOW/MID/HIGH compactly. Each should have its own GND pad nearby. Route the SIG+GND pairs as signal pairs, avoiding large loops. 10. ADDITIONAL ELEMENTS: PROTECTION, TEST POINTS 10.1 Test Points (TP) Be sure to provide test points (pads): TP_IN — crossover input (after buffer) TP_LOW — LF filter output TP_MID — MF filter output TP_HIGH — HF filter output TP_+15, TP_–15, TP_GND — power control This greatly simplifies debugging with an oscilloscope. 10.2 Power Protection On the 48 V input — it is advisable to provide: Diode/scheme for reverse polarity protection (if possible), TVS diode or varistor for voltage spikes (optional). 10.3 Possible Stability Correction Pads for small capacitors (10–47 pF) in parallel with Rf in buffers and, if necessary, in some stages — in case of stability issues (this can be not installed in the first revision, but footprints should be provided). 11. BILL OF MATERIALS (BOM) Operational Amplifiers: NE5532 — 4 pcs (filters) NE5532 — 1–2 pcs (input buffer and balanced input) Total: 5–6 NE5532 packages. Resistors (1%, metal-film): 24.9 kΩ — 8 pcs 6.34 kΩ — 8 pcs 10 kΩ — ≥ 12 pcs (feedback, buffers, etc.) 5.9 kΩ — 8 pcs 22 kΩ — 1–2 pcs (input, auxiliary chains) 47–100 kΩ — several pcs (DC-block, input) 100 kΩ — 1 pc (if needed) 100–220 Ω — 4–6 pcs (outputs, RF, protection) 4.7–10 Ω — 2 pcs for each op-amp or group of op-amps (power filtering) — quantity to be clarified during routing. Trimmer Resistors: 10–20 kΩ multi-turn — one for each band (LOW, MID, HIGH) 10–20 kΩ — 1–2 pcs for the input buffer (overall gain adjustment). Capacitors: 10 nF film — 16 pcs (RC filters) 2.2–4.7 µF film — 1–2 pcs (input DC-block) 10–22 µF electrolytic — 2–4 pcs (DC/DC outputs) 1–4.7 µF (X7R / tantalum) — 1 pc for local power filtering (optional). 100 nF ceramic X7R — 10–20 pcs (local decoupling for each op-amp) 470–1000 pF — 1–2 pcs (RF filter on the input) 10–47 pF — optional for stability correction (Rf). Power Supply: AM4T-4815DZ — 1 pc Inductor 10–22 µH (if LC filter) — 1 pc R 1–2 Ω / 1–2 W — 1 pc (if RC filter). Connectors: Input (RCA + 3-pin for internal input) Balanced (XLR/TRS or 3-pin header) Outputs LOW/MID/HIGH — 2-pin/3-pin connectors. 12. TESTING RECOMMENDATIONS 12.1 First Power-up Apply ±15 V without installed op-amps. Check with a multimeter: +15 V –15 V No short circuits in the power supply. Install the op-amps (NE5532). Apply a sine wave of 100–200 mV RMS (signal generator). Check with an oscilloscope at TP: LP650 — should pass LF and roll off everything above 650 Hz. HP650 — should roll off LF, pass everything above 650 Hz. LP2500 — should roll off above 2500 Hz. **HP250 0** — should pass everything above 2500 Hz. 12.2 Phase Check The Linkwitz–Riley 4th order should give a flat frequency response when summed at the crossover points. This can be verified with REW/Arta. 12.3 Noise Check If there is noticeable "shshsh" or whistling: Check: Grounding layout (star) Placement and filtering of AM4T-4815DZ Presence and proper installation of all 100 nF and local filters. 13. FINAL RECOMMENDATIONS FOR BEGINNERS Do not rush, build the circuit step by step: input → buffer → one filter → test, then continue. Check component values at least twice before soldering. Filters should be routed as compact "islands" around the op-amp, do not stretch R and C across the board. Always remember the rule: "The feedback trace should be as short as physically possible." Before ordering the PCB, make a "paper prototype": print at 1:1, cut it out, place real components to check everything fits.

Looking for a Revid ai promo code? You're in luck! Use code VIBE89 and save 89% on your subscription right now. 😊 If you're tired of spending hours creating videos, Revid AI might be your new best friend. This AI-powered platform helps you create viral videos in minutes. No editing skills needed. 🎯 What Is Revid AI? Revid AI is an AI video generator. It's super simple to use. You just type in your idea. The AI does the rest. It creates professional videos for TikTok, Instagram, and YouTube. The platform has helped creators make over 240,000 videos. That's a lot of content! And more than 14,000 creators use it regularly. The best part? You don't need fancy equipment. You don't need video editing experience. Just your ideas and a few clicks. 💰 How to Use the Revid ai promo code Using the VIBE89 promo code is easy. Here's how: First, go to revid.ai. Click on the pricing page. Choose the plan that works for you. When you get to checkout, look for the promo code box. Type in VIBE89. Hit apply. Boom! You'll see your 89% discount applied instantly. That's real money saved on your subscription. The code works on monthly and annual plans. So you can save whether you're testing the waters or going all in. ✨ Why Creators Love Revid AI Revid AI is popular for good reasons. Let me break it down. Speed is the first big win. Most users create videos in just 8 minutes. That's crazy fast compared to traditional editing. The AI knows what works. It analyzes millions of viral videos. Then it applies those proven formulas to your content. You get 50+ unique voices to choose from. Pick male or female voices. Find the one that fits your brand. The platform offers multiple video styles. Want a talking avatar? Done. Need a cinematic video? Easy. Just select a template and go. 🎨 Features That Make a Difference Let's talk about what you actually get. The AI script generator is brilliant. You can write your own script. Or let the AI create one for you. Either way works. The editor is super simple. No complicated tools or confusing menus. Just quick edits that let your creativity shine. Video quality is excellent. Your exports are crisp and clear. And here's the kicker – they're yours forever. Even if you cancel your subscription. You can publish directly to social media. One-click sharing to TikTok, YouTube, and Instagram. No more juggling between platforms. 💪 Real Results from Real Creators Numbers don't lie. Users report amazing results. Average engagement is up 600%. That's six times more views, likes, and comments. Some creators see 200% monthly business growth. That's doubling your results every month. Over 400 creators have reached 100,000+ views on their videos. That's the kind of viral reach everyone wants. 📊 Pricing Made Simple The most popular plan starts at $39 per month. With the VIBE89 Revid ai promo code, you pay even less. You get 2,000 credits with this plan. That's enough for plenty of videos. All premium features are included. No hidden upgrades or surprise charges. Priority support comes standard. Real humans help you when you need it. Commercial usage rights are yours. Use your videos to make money. Sell products. Grow your brand. 🚀 Getting Started Is Easy Don't let technology intimidate you. Revid AI is beginner-friendly. Most people master the basics in under 5 minutes. The interface is that intuitive. No credit card required to try it out. Test the platform first. See if it fits your needs. The platform works on any modern browser. Chrome, Firefox, Safari, Edge – all work fine. You don't need a powerful computer. Everything runs on Revid's servers. Your device just needs internet access. 🎬 What Can You Create? The possibilities are endless with Revid AI. Turn blog posts into videos. Repurpose your written content. Convert podcasts into engaging clips. Reach a visual audience. Create TikToks from scratch. Jump on trending topics fast. Make product demos that sell. Show your products in action. Build explainer videos easily. Help people understand complex topics. Generate social media ads. Drive traffic and sales. 💡 Who Should Use Revid AI? This tool isn't just for one type of creator. Social media managers save hours every week. Content creators pump out more videos. Small business owners market themselves better. Coaches and consultants share their expertise visually. Entrepreneurs build their personal brands. Marketers create ads that convert. Even complete beginners get professional results. That's the power of AI. 🔒 Your Data Stays Safe Privacy matters. Revid AI takes it seriously. Industry-standard encryption protects your data. Your content stays secure. They never share your information without permission. Your creative work remains private. You own everything you create. No shared ownership. No hidden clauses. ⏰ Don't Miss This Deal The VIBE89 Revid ai promo code gives you 89% off. That's significant savings. Whether you're starting your first channel or scaling an existing one, this discount helps. Join the 14,000+ creators already using Revid AI. Start creating videos that actually get noticed. Remember – you're not just buying software. You're investing in a tool that saves time and grows your audience. Ready to transform your content creation? Head to revid.ai now. Use promo code VIBE89 at checkout. Your viral video journey starts today! 🎥

Preamplificador dual de bajo ruido para contrabajo con dos canales piezo independientes: canal UP con sensor LDTM-028K y canal DOWN con dos LDT0-028K en paralelo, alimentado con batería de 9 V y usando exclusivamente OPA1642. Incluye buffers de entrada de ultra alta impedancia (>=20 MOhm), control de ganancia independiente, filtrado HPF 20-30 Hz y LPF 15-18 kHz, ecualización activa de 3 bandas por canal, protección contra inversión de polaridad, filtrado RF en entradas, desacoplo 100 nF + 10 uF por rail por amplificador, topología de star ground, salidas SMA separadas compatibles con Fishman Presys Blend 301, objetivo de consumo total <5 mA, impedancia de salida <3.5 kOhm, nivel nominal de salida 0.25 V RMS y máximo 1 V RMS sin distorsión. Diseño listo para PCB y fabricación con enfoque de ruido mínimo.

The Samsung Electro-Mechanics Polymer Tantalum Capacitor, part number TCPBL18336MTBA0055, is a RoHS and Halogen Compliant electronic component designed for high reliability and performance in various electronic applications. This capacitor features a nominal capacitance of 33uF with a tolerance of ±20%, operating at a rated voltage of 18V. It showcases an ESR (Equivalent Series Resistance) maximum value of 55mΩ, demonstrating its efficiency in handling higher currents with minimal power loss. The part is encapsulated in a 3528 package, measuring 3.5mm in length, 2.8mm in width, and with a height of approximately 1.2mm, making it suitable for compact designs. The capacitor is capable of withstanding surge voltages up to 23.4V and is categorized under the MSL (Moisture Sensitivity Level) 3, indicating its resilience to moisture during soldering processes. Furthermore, it exhibits remarkable performance across a broad temperature range of -55°C to +105°C, ensuring stable operation under diverse environmental conditions. Key reliability tests, including shear, bending, solderability, resistance to soldering heat, vibration, and moisture resistance, confirm the component's durability and longevity, making it an ideal choice for high-reliability applications.

The SAMSUNG ELECTRO-MECHANICS Polymer Tantalum Capacitor, part number TCPBL18336MTBA0055, is a RoHS and Halogen compliant electronic component designed for reliable use in a wide range of applications. Featuring a capacitance of 33µF with a tolerance of +20% and rated for 18V, this capacitor supports a surge voltage of 23.4V and exhibits a maximum equivalent series resistance (ESR) of 55mΩ. It is encapsulated in a 3528 package with dimensions of 3.5mm x 2.8mm x 1.1mm. The component operates effectively within temperature ranges from -55°C to 105°C, adhering to its specified tolerance. The Samsung TCPBL18336MTBA0055 capacitor ensures stable electrical performance characterized by its impedance, DF, ESR, leakage current, and other critical parameters measured at conditions such as 120Hz, 1.0Vrms, and 1.0-2.0V D.C at 25°C. Reliability tests including shear, bending, solderability, and resistance to soldering heat confirm its robustness against mechanical and thermal stresses. Additionally, the capacitor maintains electrical integrity through vibration tests and moisture resistance, with it being specified for high-temperature load life of up to 2000 hours. Its packaging is in a 7" reel configuration for ease of supply chain and assembly line integration, and recommended for reflow soldering with a peak temperature of 250°C. The TCPBL18336MTBA0055 is marked for easy identification with voltage, capacitance, and production code, ensuring clear and concise information during usage. This component is suitable for engineers seeking capacitors with reliable high frequency and ripple current performance, required for advanced electronic circuit designs.

The PAN JIT SEMI CONDUCTOR PJC831K is a 50V N-Channel Enhancement Mode MOSFET designed for high-efficiency switching applications. Featuring advanced trench process technology, this component is optimized for switch load and PWM applications and offers ESD protection up to 2KV HBM. The PJC831K, housed in a compact SOT-323 package, supports a maximum continuous drain current of 360 mA and can handle pulsed currents up to 1200 mA. Key electrical characteristics include a drain-source breakdown voltage of 50V, gate threshold voltage ranging from 0.8V to 1.5V, and a maximum RDS(on) of 1.6Ω at VGS=10V and ID=500mA. It also boasts low gate charge and capacitance values, ensuring fast switching performance. The component complies with EU RoHS 2.0 standards and utilizes a green molding compound per IEC 61249 standards, making it an environmentally friendly choice for various electronic designs.

The IPB017N10N5LF is a high-performance N-channel MOSFET from Infineon's OptiMOS™ 5 Linear FET series, designed specifically for hot-swap and e-fuse applications. This 100 V component, housed in a D2-PAK 7pin package (PG-TO 263-7), features exceptionally low on-resistance (RDS(on)) and a wide safe operating area (SOA), making it ideal for demanding power management tasks. The device is rated for a continuous drain current of up to 180 A (silicon limited) and 314 A (package limited), with a maximum pulsed drain current of 720 A. It supports gate-source voltages ranging from -20 V to 20 V and is 100% avalanche tested, ensuring robust performance under extreme conditions. The IPB017N10N5LF is RoHS compliant, Pb-free, and halogen-free, adhering to environmental standards. Key electrical characteristics include a maximum RDS(on) of 1.7 mΩ at VGS=10 V and a gate threshold voltage range of 2.5 V to 4.1 V. This MOSFET is suitable for applications requiring high efficiency and reliability, supported by its qualification according to JEDEC standards.

The Samsung Electro-Mechanics Polymer Tantalum Capacitor, part number TCPBL18336MTBA0055, meets RoHS and Halogen compliance specifications, offering a high-performance solution for a wide range of electronic applications. This surface-mount component is characterized by a capacitance of 33uF with a tolerance of +20%, an 18V rated voltage, and maximum ESR of 55mΩ. Packaged in a compact 3528 footprint with dimensions of 3.5 x 2.8 x 1.2mm, its design is optimized for robust performance in a variety of circuit environments. The capacitor features advanced reliability under conditions such as soldering heat, moisture resistance, and temperature cycling, ensuring stable operation within a temperature range from -55℃ to +105℃. Additional specifications include a maximum leakage current of 59.4uA and notable surge voltage capabilities of up to 23.4V. Ideal for electrical engineers seeking components that provide reliable, long-term performance while adhering to stringent environmental standards, its recommended soldering method is reflow, highlighting its ease of integration into existing manufacturing processes.

The PAN JIT SEMICONDUCTOR PJC831K is a 50V N-Channel Enhancement Mode MOSFET designed for switch load and PWM applications, with added ESD protection up to 2KV HBM. Utilizing advanced trench process technology, it offers low RDS(on) values of <1.60Ω at VGS=10V, <2.50Ω at VGS=4.5V, and <4.50Ω at VGS=2.5V. The component is capable of handling a continuous drain current of 360 mA and a pulsed drain current of up to 1200 mA, constrained by a maximum power dissipation of 236 mW at 25°C. The MOSFET is housed in a SOT-323 package with excellent thermal resistance characteristics (530°C/W junction to ambient). It meets RoHS 2.0 compliance and IEC 61249 standards with a green molding compound. Featuring minimal gate charge and fast switching times, this MOSFET is optimized for efficiency and reliability in demanding applications.

The TCA9555, manufactured by Texas Instruments, is a low-voltage 16-bit I/O expander designed for both I2C and SMBus for operation with a supply voltage ranging from 1.65 V to 5.5 V. This component is aimed at providing general-purpose remote I/O expansion for most microcontroller families through the I2C interface. The TCA9555 is characterized by its low standby-current consumption of maximum 3.5 uA and includes notable features such as open-drain active-low interrupt output, 5-V tolerant I/O ports, and configurable slave addresses through 3 address pins. It is designed to assist in applications such as servers, routers, personal computers, personal electronics, and industrial automation equipment, among others. Its multiple package options, including TSSOP, SSOP, WQFN, and VQFN, accommodate different sizes and form factors suitable for diverse implementation requirements. The device distinguishes itself with a polarity inversion register and latched outputs capable of directly driving LEDs, showcasing versatility in usage. Its protection features exceed JESD 22 standards for ESD, ensuring robustness for industrial applications. The TCA9555's compatibility with various microcontrollers and support for up to 400-kHz I2C bus speed make it an efficient solution for expanding I/O capabilities in space-constrained applications.

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

A buck boost converter that can be powered from a Li-Ion battery and output 3.3V @ 500mA. Powered by the TPS63051RMWR. EN is internally pulled up to VIN Input Voltage Range: 2.5V to 5.5V