Nice — you can do a clean pulse + latch using a single quad Schmitt-NAND chip: 74HC132 (or 74LVC132 for 3.3 V systems). The HC132 contains four 2-input NAND gates with Schmitt inputs so you can both clean a noisy SYN480R DATA line and build an SR latch (NAND SR is active-LOW) inside one package. Only a few passives and a driver transistor are needed. Below is a ready-to-build recipe (parts, wiring, explanation, tuning tips, and an ASCII schematic) — no extra logic ICs required. Parts (per latch) 1 × 74HC132 (quad 2-input NAND with Schmitt inputs). If your system is 3.3 V use 74LVC132 / 74HC132 rated for 3.3 V. Rin = 47 kΩ (input series) Cfilter = 10 nF (input RC to ground) — tweak for debounce/clean time Rpulldown = 100 kΩ (pull-down at input node, optional) Rpullup = 100 kΩ (pull-up for active-LOW R input so reset is idle HIGH) Rbase = 10 kΩ, Q = 2N2222 (NPN) or small N-MOSFET (2N7002) to drive your load Diode for relay flyback (1N4001) if you drive a coil Optional small cap 0.1 µF decoupling at VCC of IC Concept / how it works (short) Use Gate1 (G1) of 74HC132 as a Schmitt inverter by tying its two inputs together and feeding a small RC filter from SYN480R.DATA. This removes HF noise and provides a clean logic transition. Because it's a NAND with tied inputs its function becomes an inverter with Schmitt behavior. Use G2 & G3 as the cross-coupled NAND pair forming an SR latch (active-LOW inputs S̄ and R̄). A low on S̄ sets Q = HIGH. A low on R̄ resets Q = LOW. Wire the cleaned/inverted output of G1 to S̄. A valid received pulse (DATA high) produces a clean LOW on S̄ (because G1 inverts), setting the latch reliably even if the pulse is brief. R̄ is your reset input (pushbutton, HT12D VT, MCU line, etc.) — idle pulled HIGH. Q drives an NPN/MOSFET to switch your load (relay, LED, etc.). Recommended wiring (pin mapping, assume one chip; use datasheet pin numbers) I’ll refer to the 4 gates as G1, G2, G3, G4. Use G4 optionally for additional conditioning or to build a toggler later. SYN480R.DATA --- Rin (47k) ---+--- Node A ---||--- Cfilter (10nF) --- GND | Rpulldown (100k) --- GND (optional, keeps node low) Node A -> both inputs of G1 (tie inputs A and B of Gate1 together) G1 output -> S̄ (S_bar) (input1 of Gate2) Gate2 (G2): inputs = S̄ and Q̄ -> output = Q Gate3 (G3): inputs = R̄ and Q -> output = Q̄ R̄ --- Rpullup (100k) --- VCC (reset is idle HIGH; pull low to reset) (optional) R̄ can be wired to a reset pushbutton to GND or to an MCU pin Q -> Rbase (10k) -> base of 2N2222 (emitter GND; collector to one side of relay coil) Other side of relay coil -> +V (appropriate coil voltage) Diode across coil If you prefer MOSFET low side switching: Q -> gate resistor 100Ω -> gate of 2N7002 2N7002 source -> GND ; drain -> relay coil low side

The NTMFS4C024N is a high-performance N-Channel MOSFET manufactured by ON Semiconductor, designed for power applications such as CPU power delivery and DC-DC converters. This single MOSFET, housed in a SO-8 FL package, boasts a maximum drain-to-source voltage (VDSS) of 30 V and can handle continuous drain currents up to 78 A at 25°C. It features exceptionally low RDS(on) values of 2.8 mΩ at 10 V and 4.0 mΩ at 4.5 V, which minimizes conduction losses. Additionally, the device is optimized for low gate charge and capacitance to reduce driver and switching losses, enhancing overall efficiency. The NTMFS4C024N is Pb-Free, Halogen Free/BFR Free, and RoHS compliant, ensuring it meets modern environmental standards. With a maximum power dissipation of 33 W and thermal resistance junction-to-case of 3.8°C/W, it is well-suited for high-power applications requiring robust thermal performance.

The NTMFS4C03N, manufactured by ON Semiconductor, is a high-performance, single N-Channel MOSFET designed for power applications. Encased in a compact SO-8FL package, this component offers a maximum drain-to-source voltage (VDSS) of 30V and a continuous drain current (ID) of up to 136A at 25°C. With an exceptionally low RDS(on) of 2.1 mΩ at VGS of 10V, it minimizes conduction losses, making it ideal for high-efficiency power management. Additionally, the MOSFET features low gate charge (QG) and capacitance, reducing driver losses and enhancing overall system efficiency. The device is Pb-Free, Halogen Free/BFR Free, and RoHS compliant, ensuring adherence to environmental standards. It also boasts a robust thermal performance with a junction-to-case thermal resistance (RθJC) of 1.95°C/W, making it suitable for applications requiring efficient heat dissipation. The NTMFS4C03N is available in tape and reel packaging options, accommodating various manufacturing needs.

The NTK3134N from ON Semiconductor is a high-performance, single N-Channel MOSFET designed for power and interface switching applications in ultra-small portable electronics. Packaged in a compact SOT-723 form factor, which is 44% smaller in footprint and 38% thinner than the SC89, this MOSFET features a low RDS(on) for efficient load switching. It operates at low logic level gate drives, with a maximum drain-to-source voltage (VDSS) of 20V and a continuous drain current (ID) of up to 890mA at 25°C. The component supports pulsed drain currents up to 1.8A and boasts ESD protection. The NTK3134N is also Pb-Free, Halogen Free/BFR Free, and RoHS Compliant, making it an environmentally friendly choice for designers. Key applications include load/power switching, interface switching, logic level shifting, and battery management.

The NTMFS4C029N, manufactured by ON Semiconductor, is a high-performance, single N-channel MOSFET designed for power applications. This MOSFET features a low RDS(on) to minimize conduction losses, low capacitance to reduce driver losses, and an optimized gate charge to minimize switching losses. It is packaged in a compact SO-8 FL package, making it suitable for space-constrained designs. The component can handle a maximum drain-to-source voltage (VDSS) of 30 V and a continuous drain current (ID) of up to 46 A at 25°C. It is ideal for applications such as CPU power delivery and DC-DC converters. The NTMFS4C029N is Pb-free, halogen-free/BFR-free, and RoHS compliant, ensuring it meets modern environmental and safety standards.

The NTTFS4C06N, manufactured by ON Semiconductor, is a high-performance, single N-Channel Power MOSFET designed for applications requiring efficient switching and low conduction losses. This MOSFET is rated for a maximum drain-to-source voltage (VDSS) of 30 V and can handle continuous drain currents up to 67 A. Key features include a low RDS(on) of 4.2 mΩ at VGS = 10 V and 6.1 mΩ at VGS = 4.5 V, which minimizes conduction losses, and optimized gate charge characteristics that reduce switching losses. Additionally, the component boasts low capacitance to minimize driver losses, making it ideal for use in DC-DC converters, power load switches, and notebook battery management systems. The device is RoHS compliant, Pb-free, and halogen-free, ensuring environmentally friendly compliance. The NTTFS4C06N is available in a compact WDFN8 package, making it suitable for high-density circuit designs.