• PCB Business Card V2

    PCB Business Card V2

    Change History from V1: -13.56MHz tuning -larger instruction font -put some stuff on the back #template I wanted to create a business card that has some functionality and shows off a bit of my portfolio IRL: -NFC to my flux page -here's the [instructables](https://www.instructables.com/PCB-Business-Card-With-NFC-Make-Yours-With-NFC-QR-/) -Put a bunch of modules on it Find the BoM [here](https://www.digikey.com/short/2db2vnmp)

    markwuflux

    7 Comments

    37 Stars

  • The Green Dot 2040E5 Board

    The Green Dot 2040E5 Board

    The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #internetOfThings #smartHomeDevices #SeeedStudio #XIAO #LoRa #RP2040 #IoT

    seeedstudio

    &

    +2

    339 Comments

    35 Stars

  • ENVIRONMENTAL EXPOSURE RISK METER

    ENVIRONMENTAL EXPOSURE RISK METER

    Environmental exposure risk measuring device based on ESP32, ultraviolet light (UV) and CO2 gas sensor modules. It has a voltage booster based on MT3608 chip and a solar panel lithium battery charger with MPPT based on CN3791 chip.

    jr98

    1 Comment

    31 Stars

  • Audio Electronics | Copilot Preset

    Audio Electronics | Copilot Preset

    Servo Control Module with Battery Protection and UI for 100×60×50 mm Enclosure

    nico

    13 Stars

  • PCB Business Card V2

    PCB Business Card V2

    Change History from V1: -13.56MHz tuning -larger instruction font -put some stuff on the back I wanted to create a business card that has some functionality and shows off a bit of my portfolio IRL: -NFC to my flux page -here's the awesome [instructables](https://www.instructables.com/PCB-Business-Card-With-NFC/) -Put a bunch of modules on it Find the BoM [here](https://www.digikey.com/short/2db2vnmp)

    nico

    3 Comments

    13 Stars

  • 16 channel relay module

    16 channel relay module

    16 channel relay that will allow you to control different types of electrical loads

    jharwinbarrozo

    211 Comments

    12 Stars

  • Pet Tracker Device

    Pet Tracker Device

    This is a Pet Tracker Reference Design based on STM32L4. Tracker connects with network by SIM800L module connected to the STM. Also MCU connected to the GPS by uart and send data to server #STM32 #GPS #G4 #G3 #LTE #IoT #Tracker #smartHomeDevices #referenceDesign #edge-computing #edgeComputing #stm #template #referenceDesign

    vasyl

    &

    63 Comments

    12 Stars

  • AvocAudio: A tinyML community board v1

    AvocAudio: A tinyML community board v1

    AvocAudio is a compact tinyML community board designed for extensive audio data collection for various tinyML applications. It leverages the Raspberry Pi RP2040 and integrates a LoRa-E5 LoRaWAN Transceiver Module for connectivity. Equipped with an SD card slot for local data storage, the board ensures efficient data collection. The board operates on solar power or a lithium-ion battery, ensuring flexible and efficient energy use. #audioDevices #raspberryPi #rp2040 #lorawan #iot #solar

    collinsemasi

    &

    210 Comments

    10 Stars

  • Guitar Pedal Template

    Guitar Pedal Template

    Compact USB-C Rechargeable 9V/1A Guitar Pedal Power Supply Module with 18650 Battery

    jwwitherspoon

    9 Stars

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design.

    vasy_skral

    &

    146 Comments

    8 Stars

  • Scale Snap 3D

    Scale Snap 3D

    3D Camera Module is a scalable SPI enabled 4 camera array pinout for 3D photogrammetry reconstruction which uses I2C to connect between each module to expand camera capacity while keeping capture sequences in sync. It uses ATMega32U4 with its built in USB 2.0 for data transfer and camera array adjustments and capture as well as a micro SD card slot for local image storage. An interrupt logic pinout should be used on the SPI master module as capture command. Each module is powered via USB-C (5V) or barrel jack (12V regulated to 5V).

    cwong7

    &

    96 Comments

    6 Stars

  • buffered-mult

    buffered-mult

    A simple 1-to-3 buffered mult - Eurorack-talk for an audio/CV distributor The board itself is a 3U 4hp rack-mountable module This circuit was designed by https://www.skullandcircuits.com/utilities-buffered-multiple/ and their T&Cs apply to commercial use (I built these for myself)

    dominic-dev

    &

    36 Comments

    6 Stars

  • Buck Boost 3.3V 500mA Physical Module

    Buck Boost 3.3V 500mA Physical Module

    A buck boost converter that can be powered from a Li-Ion battery and output 3.3V @ 500mA. Powered by the TPS63051YFFR and in the same package as a standard Adafruit buck converter. Expect to squeeze around 5-10% SoC from a typical Li-Ion battery. Input Voltage Range: 2.5V to 5.5V Assembled at pcbway.com

    markwuflux

    5 Stars

  • Grove Vision AI Module V2 schematics alpha v0.2

    Grove Vision AI Module V2 schematics alpha v0.2

    Here is the schematic of grove vision ai v2. with this you can edit and customize your vision sensor to incorporate with you own projects

    seeedstudio

    &

    5 Stars

  • Particle Argon Robotic arm

    Particle Argon Robotic arm

    This is a board for a robotic arm controlled by Particle Argon. Settings can be made using a display module that connects to the board. You can teach him to draw or cook. Just use your imagination!

    vasyl

    23 Comments

    4 Stars

  • i.MX RT1010 LoRa Logger

    i.MX RT1010 LoRa Logger

    This project is a LoRa data logger implementing the i.MX RT1010 microcontroller. It collects and logs data through the LoRa-E5 module and stores the data via a TF card. Capacitors and resistors are used to construct the necessary circuits, ensuring proper functionality. This system is ideal for long-distance, low-power IoT applications. #project #LoRa #RT1010 #SDCARD

    nico

    12 Comments

    4 Stars

  • buffered-mult restored

    buffered-mult restored

    A simple 1-to-3 buffered mult - Eurorack-talk for an audio/CV distributor The board itself is a 3U 4hp rack-mountable module This circuit was designed by https://www.skullandcircuits.com/utilities-buffered-multiple/ and their T&Cs apply to commercial use (I built these for myself)

    dominic-user-14

    &

    1 Comment

    4 Stars

  • buffered-mult restored pLVs

    buffered-mult restored pLVs

    A simple 1-to-3 buffered mult - Eurorack-talk for an audio/CV distributor The board itself is a 3U 4hp rack-mountable module This circuit was designed by https://www.skullandcircuits.com/utilities-buffered-multiple/ and their T&Cs apply to commercial use (I built these for myself)

    dominic-user-14

    &

    1 Comment

    4 Stars

  • General Purpose Alarm Device

    General Purpose Alarm Device

    This General-Purpose- Alarm-Device repository defines a 'General Purpose Alarm Device' aka, GPAD module. This module has an enclosure and inside is an embedded microcontroller system. #internetOfThings #smartHomeDevices

    jecstronic

    &

    4 Stars

  • PCB Business Card for Flux

    PCB Business Card for Flux

    I wanted to create a business card that has some functionality and shows off a bit of my portfolio IRL: -NFC to my flux page -here's the awesome [instructables](https://www.instructables.com/PCB-Business-Card-With-NFC/) -Put a bunch of modules on it Find the BoM [here](https://www.digikey.com/short/2db2vnmp)

    markwuflux

    5 Comments

    4 Stars

  • ESP32-H2 Relay Board

    ESP32-H2 Relay Board

    This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

    vasyl

    &

    98 Comments

    3 Stars

  • LoST 3296 Board

    LoST 3296 Board

    The LoST 3296 board features an Low Power STM32, an RFM95 Module for LoRA connectivity and a connector to interface different sensors. You can hook up a UART module, I2C module and a module using the RS485. The board is powered by the USB-C port

    emasicollins

    66 Comments

    3 Stars

  • ESP32 RS485 (Modbus) Controller Reference Design

    ESP32 RS485 (Modbus) Controller Reference Design

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation, and headers for connecting sensors and actuators. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated #reference-design #polygon

    vasy_skral

    22 Comments

    3 Stars

  • Modular PSU

    Modular PSU

    Super duper cool Module PSU Assembly: just plug it in

    natarius

    2 Comments

    3 Stars

  • 2-channel relay module

    2-channel relay module

    2 channel relay module for arduino

    vasyl

    1 Comment

    2 Stars