100 W, 7–55 MHz Broadband Class‑AB RF Power Amplifier for Yaesu FT‑818 with 50 Ω I/O, 13.8 V/15 A Supply, Relay T/R Switching, PTT/ALC Interface, Selectable 5th‑Order Chebyshev LPF Bank, and Overtemperature‑Controlled Fan Support

Fully integrated Arduino Uno shield with 13.56 MHz RFID reader, microSD card interface, isolated relay output for a 120 VAC signal circuit, and 28 VDC to 5 V buck power input.

Single-project implementation of the Blue Ant AMP Architecture Rev2 using one shared schematic with six logical board partitions: PCB-01 phono stage, PCB-02 input selector and relay attenuator interface, PCB-03 balanced driver and RCA-to-balanced conversion interface, PCB-04 dual logical power amplifier channels, PCB-05 multi-rail power supply, and PCB-06 isolated control and display. Explicit inter-partition connector interfaces and named nets preserve balanced signal handling after RCA conversion, distinct rail domains (+63V, -63V, +15V, -15V, +5V, +3.3V), and documented hard constraints including low-noise analog isolation and high-voltage domain separation.

Reusable ESP32-WROOM golf ball dispenser interface board with protected 12V to 24V input power, one conditioned coin pulse input, SPDT relay dry-contact output, open-collector output, Bluetooth pulse generation, screw-terminal field wiring, and optional UART programming access.

Industrial 415V 3-phase motor control interface with STM32 command logic, SIMCom A7672S 4G SMS control, isolated relay driver, 12V input power, and 150x100mm 2-layer PCB constraints.

UK Smart Wall Switch Back Board: 802.3af PoE-powered 65x65mm relay and energy-monitoring back board with RJ45, isolated 5V/3.3V rails, W5500 Ethernet, BL0942 metering, touch ICs, and 12-pin pogo interface.

Project Title: Plant Monitoring and Irrigation System Overview: This system is based on the ESP32-S3 and is designed to manage irrigation for a multi-floor building. Key Features: Multi-Floor Operation: The system controls three separate floors. Each floor's irrigation can be managed independently. Irrigation and Pump Control: Each floor uses a solenoid valve to regulate water flow. The solenoid valves are operated via MOSFETs. A relay engages an AC water pump when a MOSFET triggers a solenoid valve. Hardware Interconnects: Screw Terminal connectors are added for connecting the solenoid valves and the motor pump. A DC Jack is included to supply power to the system. User Interface & Connectivity: Two JST connectors are provided for integrating an OLED display, a rotary encoder, and a pushbutton. Future enhancements may include the addition of soil moisture sensors. Remote Control: The system is designed for future integration with Blynk IoT. Blynk IoT will offer both manual control and timer-based irrigation modes for each floor.