An ATtiny13 is more than sufficient to control almost any number of NeoPixels via an IR remote. The NeoController was originally developed as a tester for 800kHz NeoPixel strips. Since there was still so much flash left in the ATtiny13, an IR receiver was integrated so that some parameters can be controlled with an IR remote control. In this way, it is also suitable as a simple and cheap remote-controlled control unit for NeoPixels. Due to its small size (21.6mm x 11.4mm), it can be soldered directly to the LED strip without any problems. The power supply via a USB-C connection enables currents of up to 3A. There is still more than a third of the flash memory left for additional ideas.

This circuit drives 10 LEDs making them flash to the rhythm of the music (using a TIP31C transistor to act as a voltage-controlled switch) Credit: https://www.youtube.com/watch?v=3qZ3uA8hDmE

This bee hotel version is an intermediary version that implements some featuresets. The main feature that we are leaving out is Matter support over Zigbee (for a wider range in the backyard). In this version, we are implmenting: -Legacy WiFi/BT connectivity. -Camera with flash capability -Solar Charging -Energy Storage -Humidity and Temp Sensor

Seeed Studio XIAO ESP32C6 is powered by the highly-integrated ESP32-C6 SoC, built on two 32-bit RISC-V processors, with a high-performance (HP) processor with running up to 160 MHz, and a low-power (LP) 32-bit RISC-V processor, which can be clocked up to 20 MHz. There are 512KB SRAM and 4 MB Flash on the chip, allowing for more programming space, and binging more possibilities to the IoT control scenarios.

NAND programmer based on STM32 processor. It supports parallel NAND and SPI flash programming.

Welcome to your new project. Imagine what you can build here.

AvocAudio is a compact tinyML community board designed for extensive audio data collection for various tinyML applications. It leverages the Raspberry Pi RP2040 and integrates a LoRa-E5 LoRaWAN Transceiver Module for connectivity. Equipped with an SD card slot for local data storage, the board ensures efficient data collection. The board operates on solar power or a lithium-ion battery, ensuring flexible and efficient energy use. #audioDevices #raspberryPi #rp2040 #lorawan #iot #solar

Welcome to your new project. Imagine what you can build here.

The semgdaq board is a wearable 6 channel data acquisition unit for capturing surface electromyographic (sEMG) signals from human arm muscles using SJ2-3593D jack connectors while conditioning, digitizing, processing and feature extracting them then transmitting the feature data as vectors to an external AI accelerated board through an SM12B-SRSS IDC connector using 12C and UART communication protocals where AI models are run for various applications including robotic control, muscle signals medical assessment and gesture recognition. The feature vectors are comprised of onset detection, slope sign changes, autoregression coefficients and Short Time Fourier Transform magnitude spectrum data for each segment or window of the signals in real time. This vectors can be used as the basis for further feature extraction on more computationally resourceful hardware where machine learning algorthms can be employed for descision making in the applications mentioned earlier. The board leverages INA125P instrumentation amplifiers together with filter stages utilizing LM324QT op-amps for conditioning and an STM32G4A1VET6 microcontroller for the digitization, processing, feature extraction and data transmission. Since AI models can only be as good as the data, the design of such a DAQ is necessary to ensure clean, reliable and real-time data for AI applications requiring sEMG feature data. The board also has USB-FS and JTAG to cater for debugging and external flash memory to extend its data storage and processing capability. The power (5V) is fed through a screw terminal and is regulated by two LDK320AM LDO regulators to offer 5V, 3.3V and 1.8V to meet the requirements of various components on the board.

The Arduino MKR MEM shield will allow you to add more flash memory and storage. It provides 2-megabytes of flash memory. #example

Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

The Arduino MKR MEM shield will allow you to add more flash memory and storage. It provides 2-megabytes of flash memory.

This project is a template for projects involving RP2040. It consists of the chip, the decoupling capacitors, the crystal oscillator and the flash memory. #raspberryPi #rp2040 #template

This circuit drives 10 LEDs making them flash to the rhythm of the music (using a TIP31C transistor to act as a voltage-controlled switch) Credit: https://www.youtube.com/watch?v=3qZ3uA8hDmE

Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

Seeed Studio XIAO ESP32C6 is powered by the highly-integrated ESP32-C6 SoC, built on two 32-bit RISC-V processors, with a high-performance (HP) processor with running up to 160 MHz, and a low-power (LP) 32-bit RISC-V processor, which can be clocked up to 20 MHz. There are 512KB SRAM and 4 MB Flash on the chip, allowing for more programming space, and binging more possibilities to the IoT control scenarios.

Seeed Studio XIAO ESP32S3 leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB FLASH, and external SD card slot. All of these make it suitable for embedded ML, like intelligent voice and vision AI. #SeeedStudio #xiao

This circuit drives 10 LEDs making them flash to the rhythm of the music (using a TIP31C transistor to act as a voltage-controlled switch) Credit: https://www.youtube.com/watch?v=3qZ3uA8hDmE

The Arduino MKR MEM shield will allow you to add more flash memory and storage. It provides 2-megabytes of flash memory.

8KB 51Series FLASH DFN-8-EP(3x3) Microcontroller Units (MCUs/MPUs/SOCs) ROHS

ESP32-C6-DevKitM-1 is an entry-level development board based on ESP32-C6-MINI-1(U), a general-purpose module with a 4 MB SPI flash. This board integrates complete Wi-Fi, Bluetooth LE, Zigbee, and Thread functions.

PIC series Microcontroller IC 8-Bit 48MHz 32KB (16K x 16) FLASH 40-PDIP #CommonPartsLibrary #IntegratedCircuits #Microcontrollers #PIC18F4550

Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX #wemos #esp8266 #project-template #template

This circuit drives 10 LEDs making them flash to the rhythm of the music (using a TIP31C transistor to act as a voltage-controlled switch) Credit: https://www.youtube.com/watch?v=3qZ3uA8hDmE

Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

Lethal Company Pro Flashlight Broken Features: - U2M cannot be line powered from this circuit so the LED driver does not regulate. [Find the acompanying button board here](https://www.flux.ai/markwuflux/lethal-company-pro-flashlight-button-board) -Ultra bright -Makes click noise from speaker -Wirelessly transmits battery life (maybe use Ubo to receive this) -Drive a SST-40 Chinese LED I want this thing to be super bright! The brighter the better, but keep it simple. These LEDs will draw a lot of power, so we need some sort of CC source. It doesn't have to have high bandwidth. I am thinking about a DIY microcontroller buck converter with PID duty cycle control. Mistakes in this V1 design: - No pullup resistor on PG of Module1

It's dangerous to go alone... take this!

Designing a Tractive System Active light(TSAL) circuit for an Electric Vehicle which does the following operations 1. The TSAL itself must have a red light, flashing continuously with a frequency between 2 Hz and 5 Hz and a duty cycle of 50%, active if and only if the LVS is active and the voltage across DC-link capacitors exceeds half the nominal TS voltage 2. The TSAL itself must have a green light, continuously on, active if and only if the LVS is active and ALL of the following conditions are true: ● All AIRs are opened. ● The pre-charge relay is opened. ● The voltage at the vehicle side of the AIRs inside the TSAC does not exceed 60 VDC or 50 VAC RMS. This schematic will include only the Green Light logic. We have to take proper care of High voltage and Low voltage isolation in this schematic because it will have to be implemented on the PCB as well.

This project is a WiFi-enabled door and window sensor using the ESP8684-WROOM-02C module from Espressif Systems. It includes a triple-color LED indicator, Reed switch for detection, a 3.3V Regulatory mechanism, and USB C for firmware flashing. It's powered by a regular non-rechargeable AAA battery. #WiFi #MCU #ReferenceDesign #project #ESP8684 #referenceDesign #simple-embedded #espressif

Cost-Effective USB-C 2S Li-Ion Charger with Integrated 1W LED Flashlight - Fully Discrete, Generic Components, Minimalist Design

Hand-sized pumpkin PCB The copper has been removed at the eyes and mouth so light can shine through from the back! 555 Timer has been selected to provide LED flashing at 0.5Hz Adjust R2 for differing speed!

Welcome to your new project. Imagine what you can build here.

IC FLASH 256MBIT SPI

Welcome to your new project. Imagine what you can build here.

Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

This bee hotel version is an intermediary version that implements some featuresets. The main feature that we are leaving out is Matter support over Zigbee (for a wider range in the backyard). In this version, we are implmenting: -Legacy WiFi/BT connectivity. -Camera with flash capability -Solar Charging -Energy Storage -Humidity and Temp Sensor

Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX #wemos #esp8266 #project-template #template

Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

µGame is a game console that is programmable with Python. To get a fully functional device, you will need to compile and flash the UF2 bootloader and the special CircuitPython firmware. Instructions for that will be posted separately.

Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX #wemos #esp8266 #project-template #template

Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR