Coin, 12.5mm Lithium Manganese Dioxide 3V Battery Non-Rechargeable

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

To optimize your 6-layer board manufacturing process with Seeed Studio Fusion, utilize this comprehensive template. It incorporates a majority of the essential manufacturing constraints as global rules, ensuring a smoother and more efficient production workflow. #project-template #template #manufacturer-design-rules

A tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's our lowest-cost arduino-IDE programmable board!

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

A sublayout based on AMS1117-3.3 with all of its needed filtering capacitors.

This LTC3401-based reference design is a boost converter, transforming a lower input voltage into a stable 3V3 output. Perfect for applications that need a regulated 3V3 power source. #referenceDesign #project #boostConverter #voltageRegulator #3V3 #LTC3401 #referenceDesign #powermanagement #analogdevices #template #reference-design #polygon

This is the MGM240P template with minimal configuration for operation. There is a 3.3V regulator, a connector for UART and SWD #MGM240P #IoT #template #uart #3V3 #arduino-matter

Typical Application Circuit for RT6150B-33GQW, 1 Positive Fixed Output 3.3V 800mA. Input voltage 6V max. With JST connectors(Vin and +3V3) and with block terminal connectors(Vin and +3V3) #project-template #voltageregulator #switchingregulator #BuckBoost #project

3.3 V-powered pH and ORP probe interface using an ADS1115 module, MCP6002 through-hole buffers, and DS18B20 temperature sensing. External ESP32 connection is through one 5-pin header carrying 3V3, GND, SDA, SCL, and DQ; ADS1115 ADDR is fixed locally and ALERT is unused.

TPS62130 Is a Texas instrument Buck Converter IC in the TPS family of power devices. This converter has a maximum input range of...

Welcome to your new project. Imagine what you can build here.

Compact Li-Po powered ESP32 wearable vibration alert prototype for construction worker safety monitoring, using a relay module to directly switch a 3V coin vibration motor with beginner-friendly soldering and labeled PCB wiring.

800-mA Linear Charger for 1- to 4-Cell Supercapacitor, 40-V load-dump tolerant to support charging backup supercapacitor, 3-V to 18-V operating Integrated fault protection – 18-V IN overvoltage protection – 1000-mA overcurrent protection – 125°C thermal regulation; 150°C thermal shutdown protection – ISET pin short protection

The TPSM64404, TPSM64406, and TPSM64406E from Texas Instruments are highly integrated synchronous buck power modules designed for high power density and low EMI performance. These modules feature integrated MOSFETs, inductors, and controllers within a compact 6.5mm × 7.0mm × 2mm overmolded package, making them ideal for space-constrained applications. They support a wide input voltage range of 3V to 36V and deliver adjustable output voltages from 0.8V to 16V. The TPSM64404 offers dual 2A outputs or a stackable 4A output, while the TPSM64406 and TPSM64406E provide dual 3A outputs or a stackable 6A output, with the TPSM64406E rated for extended temperature ranges down to -55℃. These modules achieve peak efficiencies exceeding 93.5% and feature ultra-low quiescent current, making them suitable for battery-powered applications. Designed to meet stringent EMI standards, the modules include features such as dual input paths, integrated capacitors, spread spectrum modulation, and low-noise packaging. Additional functionalities include precision enable inputs, power-good indicators, overcurrent protection, thermal shutdown, and the ability to configure for multiphase operation up to 18A. The TPSM6440xx series is optimized for test and measurement, aerospace, defense, and factory automation applications.

Texas Instruments' TPSM6440xx series, including the TPSM64404, TPSM64406, and TPSM64406E, are highly integrated synchronous buck power modules designed for applications requiring high power density and low EMI. These modules support dual output or multiphase single output configurations, operating over a wide input voltage range from 3V to 36V and delivering adjustable output voltages from 0.8V to 16V. Encased in a compact 6.5mm x 7.0mm x 2mm overmolded package, they feature integrated MOSFETs, inductors, and controllers, ensuring ease of design and high efficiency with peak performance exceeding 93.5%. The TPSM6440xx modules are optimized for low noise and EMI, meeting CISPR 11 and 32 Class B emissions standards. They include robust protection features like precision enable inputs, power good indicators, overcurrent, and thermal shutdown protections, making them suitable for demanding applications in test and measurement, aerospace, defense, and factory automation. With a flexible design approach, these modules can be easily configured using Texas Instruments' WEBENCH® Power Designer tool.

The RMLV0808BGSB, manufactured by Renesas, is an 8-Mbit static RAM organized as 1,048,576 words by 8 bits, utilizing Renesas's advanced LPSRAM technology to deliver higher density, enhanced performance, and reduced power consumption. Operating with a single 3V supply voltage range of 2.4V to 3.6V, this component features access times of 45ns for voltages between 2.7V and 3.6V, and 55ns for voltages between 2.4V and 2.7V. It boasts a low standby power dissipation of 0.45µA (typical), making it ideal for battery backup systems. The RMLV0808BGSB is encapsulated in a 44-pin TSOP (II) package, offering equal access and cycle times, common data input/output with three-state output, and direct TTL compatibility for all inputs and outputs. Additional features include battery backup operation and a wide operating temperature range of -40°C to +85°C, ensuring reliability in various applications.

The FDV301N from ON Semiconductor® is an N-Channel logic level enhancement mode field effect transistor (FET), designed using ON Semiconductor's proprietary, high cell density, DMOS technology. This component is optimized for low voltage applications, offering a compact and efficient alternative to traditional digital transistors. It boasts a drain-source voltage (VDS) of 25V, a continuous drain current of 0.22A, and a peak drain current of 0.5A. The FDV301N features very low gate drive requirements, making it suitable for direct operation in 3V circuits, with a gate threshold voltage (VGS(th)) of less than 1.06V. The device also includes a gate-source Zener diode for enhanced ESD ruggedness, rated at over 6kV Human Body Model. With a maximum RDS(ON) of 5Ω at VGS=2.7V and 4Ω at VGS=4.5V, this FET is ideal for applications requiring minimal on-state resistance. The FDV301N is available in various packages including SOT-23, SuperSOT™-6, and SuperSOT™-8, providing flexibility for different design requirements.

USB-C Receptacle with built-in ESD Protection and 3V3 LDO Voltage Regulator

USB-C Receptacle with built-in ESD Protection and 3V3 LDO Voltage Regulator

USB-C Receptacle with built-in ESD Protection and 3V3 LDO Voltage Regulator

USB-C Receptacle with built-in ESD Protection and 3V3 LDO Voltage Regulator

USB-C Receptacle with built-in ESD Protection and 3V3 LDO Voltage Regulator

USB-C Receptacle with built-in ESD Protection and 3V3 LDO Voltage Regulator

USB-C Receptacle with built-in ESD Protection and 3V3 LDO Voltage Regulator