This is a reference design of a buck converter based on LTC3406 with 1.2V 0.6A output #referenceDesign #powermanagement #analogdevices #template

A circuit for a gps tracker using stm32f103c8t6 and sim 808, that acquires and sends gps coordinates to a separate interfaced application. The circuit will be powered by a 12v dc battery so there a need for power regulation. there is a USB type micro B for code uploading.

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This is a power management board which supports solar (4.4V - 6V), USB (5V) and Battery (3.2 - 4.2V) Supports battery recharging by either the solar or USB. The output should be 3.3V at 1A, 5V at 600mA and 12V at 500mA The project uses switching regulators and has 3 independent rails for the 3 outputs. #templates #iot #powermanagement

This is a reference design of step-up converter based on ADP1618 with 5V input and 12V output #dcdc #5V #12V #power#referenceDesign #powermanagement #analogdevices #template

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This is a power management board which supports solar (4.4V - 6V), USB (5V) and Battery (3.2 - 4.2V) Supports battery recharging by either the solar or USB. The output should be 3.3V at 1A, 5V at 600mA and 12V at 500mA The project uses switching regulators and has 3 independent rails for the 3 outputs. #templates #iot #powermanagement

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

The EMF30N02J from Excelliance MOS Corporation is an N-Channel Logic Level Enhancement Mode Field Effect Transistor designed for high efficiency and performance in a compact SOT-23 package. With a maximum Drain-Source voltage (BVDSS) of 20V and a maximum Drain current (ID) of 5A at 25°C, this MOSFET is ideal for low-voltage switching applications. It features a low maximum Drain-Source On-State Resistance (RDSON) of 30mΩ at a Gate-Source voltage (VGS) of 4.5V, ensuring minimal power dissipation. The component supports a Gate-Source voltage (VGS) up to +12V and operates within a temperature range of -55°C to 150°C. The EMF30N02J is also Pb-Free, Halogen-Free, and classified as a GP Green Product, making it environmentally friendly. Key electrical characteristics include a Gate Threshold Voltage (VGS(th)) between 0.45V and 1.2V, a maximum Gate-Body Leakage (IGSS) of 100nA, and a typical Forward Transconductance (gfs) of 7S. Additionally, the MOSFET exhibits excellent dynamic performance with a total Gate Charge (Qg) of 6.2nC, making it suitable for high-speed switching applications. The thermal resistance is rated at 100°C/W from junction-to-ambient and 55°C/W from junction-to-lead, ensuring efficient thermal management.

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

A PCB for a power supply with a 5V, a 12V and an adjustable voltage terminal

This is a module boost DC-DC Regulator with 12V 0.3A(1.2A) output and 5V input voltage for LEDs #ti #ledpower #led #boost #referenceDesign #powermanagement #texas-instruments #template #reference-design

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

An Expansion board for Arduino Nano and compatible boards. It hosts an L293D Motor driver IC to control 2 DC motors independently. Has provision to add HC-05 / HC-06 Bluetooth Module. All free GPIO pins are easily accessible. Operates on 7.4 - 12V Battery.

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

+12V ---- VCC (TL494) GND ---- GND (TL494) |---- RT (10kΩ) |---- CT (0.01uF) CT --| | OSC OUT ---------- DTC ---------- GND (conectar a tierra) FEEDBACK ---|--(Divisor Resistor o Capacitor) | |--------------(Entrada de Audio) OUT_A ------------- GATE Q1 (IRF540N) OUT_B ------------- GATE Q2 (IRF540N) Q1 (D) --- L ------------------- Speaker Q2 (D) --- GND Capacitor de acoplamiento y desacoplamiento

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

3D Camera Module is a scalable SPI enabled 4 camera array pinout for 3D photogrammetry reconstruction which uses I2C to connect between each module to expand camera capacity while keeping capture sequences in sync. It uses ATMega32U4 with its built in USB 2.0 for data transfer and camera array adjustments and capture as well as a micro SD card slot for local image storage. An interrupt logic pinout should be used on the SPI master module as capture command. Each module is powered via USB-C (5V) or barrel jack (12V regulated to 5V).

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

The AO3422 from Alpha & Omega Semiconductor is a high-performance, N-Channel Enhancement Mode Field Effect Transistor (FET) that leverages advanced trench technology to achieve outstanding RDS(ON) and low gate charge. Designed for efficient power conversion and load switching applications, this component operates effectively across a wide gate drive range of 2.5V to 12V. The AO3422 is characterized by a drain-source voltage (VDS) of 55V and a continuous drain current (ID) of 2.1A at a gate-source voltage (VGS) of 4.5V. Its RDS(ON) is impressively low, coming in at less than 160mΩ at VGS of 4.5V, making it suitable for a variety of power management tasks. The device is encapsulated in a compact SOT23 package, offering a robust solution for space-constrained applications. Additional features include a maximum junction temperature of 150°C, high forward transconductance, and fast switching characteristics that support efficient and reliable operation in high-performance circuit designs.

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This is a power module based on a TPS61085 voltage booster IC with an output voltage of 12V 3A(max) #boost #power #dcdc #ti #referenceDesign #powermanagement #texas-instruments #template #reference-design

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

This is a reference design of step-up converter based on ADP1618 with 5V input and 12V output #dcdc #5V #12V #power#referenceDesign #powermanagement #analogdevices #template #reference-design

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications from 4V to 5V Input. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. USB INPUT: 5V Solar INPUT: 4V - 6V Battery Input: 3.6V - 4.2V OUTPUTs: 12V, 5V, and 3.3V #IoT #power #management #usb

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template