• Patient Ivory Interocitor

    Patient Ivory Interocitor

    Introducing our innovative modular, AI-powered DIY laptop carrier board project! This design focuses on a step-by-step approach, starting with a solid architectural scaffold that lays the groundwork for a high-performance system. The project is built around a hierarchical schematic structure including: • A Top Sheet outlining the system overview and power tree • SoM Connectors organized into three 100-pin assemblies (two CM4/5-compatible and one dedicated to high-speed operation) • Dedicated Power/PD management • An M.2 A+E interface for the Coral TPU (PCIe x1 from PORT0) • An M.2 M-key interface for an NVMe SSD (PCIe x2 from PORT1) • Comprehensive USB & Hub configurations • A microSD integration module • Supervisory and Reset controls The design aligns with cost-effective 4-layer board stackup practices (JLCPCB friendly) while following best high-speed design guidelines for USB/PCIe integrity. The integrated silkscreen placeholders feature custom sci-fi fonts for a unique, personal branding touch. Key routing notes include precise PCIe lane mappings based on the Orange Pi CM5 manual, ensuring clean ground return paths, effective decoupling, and proper AC-coupling placement. With paired USB hubs optimized for minimal depth and latency and robust power sequencing strategies, this project is poised to evolve into a high-speed, scalable prototype. #DIYElectronics #ModularDesign #PCBDesign #EmbeddedSystems #PCIe #USBDesign #OrangePiCM5 #TechInnovation #HighSpeedElectronics

    zero122

    zero122

    +

    sponjebob
    deku122
    bakugo122
    +2

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    tomiltonian

    tomiltonian

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    jeffhuang

    jeffhuang

    0 Uses

    0 Comments

    0 Stars

  • ESP32-H2-WROOM-03 Reference Design 55C9

    ESP32-H2-WROOM-03 Reference Design 55C9

    This project is an IoT development board based on the ESP32-H2-WROOM-03 module, featuring USB-C connectivity for power and communication. The board also includes two buttons, several decoupling capacitors, and a couple of connectors for peripheral connections. The onboard USB-to-UART bridge facilitates communication with a host device. #referenceDesign #esp32 #iot #esp32-h2 #project #template #reference-design

    snaiperspam

    snaiperspam

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    alcccosta

    alcccosta

    0 Uses

    0 Comments

    0 Stars

  • STM32G4 Digital CC-CV Buck Converter

    STM32G4 Digital CC-CV Buck Converter

    Digitally controlled 24 V to 0-12 V 1 A buck converter with STM32G4 MCU, CC/CV regulation, SWD debug, SPI expansion connectors, and placeholder power I/O connectors.

    akashghosh931

    akashghosh931

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    anmolkingk

    anmolkingk

    0 Uses

    0 Comments

    0 Stars

  • ESP32-C3-WROOM-02U Reference Design dsMU

    ESP32-C3-WROOM-02U Reference Design dsMU

    This is a ESP32-C3-WROOM-02U reference design based on the manufacturer's recommendations. On board we have an ESP module, USB C for firmware, 2 connectors with IOs and RGB LED #ESP32 #WiFi #LED #IoT #BLE #ARM #referenceDesign #simple-embedded #espressif #template

    barracuda474

    barracuda474

    0 Uses

    0 Comments

    0 Stars

  • ESP32-C3-WROOM-02U Reference Design dsMU

    ESP32-C3-WROOM-02U Reference Design dsMU

    This is a ESP32-C3-WROOM-02U reference design based on the manufacturer's recommendations. On board we have an ESP module, USB C for firmware, 2 connectors with IOs and RGB LED #ESP32 #WiFi #LED #IoT #BLE #ARM #referenceDesign #simple-embedded #espressif #template

    sklgz

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    hemanths28

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    drart

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design 9bff

    ESP32-S3-WROOM-1 Reference Design 9bff

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    diparoba5

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    ghostspectre

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design 88qg

    ESP32-S3-WROOM-1 Reference Design 88qg

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    mindstorms6

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    mindstorms6

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    9ahsa0

    0 Uses

    0 Comments

    0 Stars

  • LTR-390UV-01 Reference Design

    LTR-390UV-01 Reference Design

    This project is a design for a UV sensor circuit based on the Lite-On LTR-390UV-01. Key components include a voltage regulator (AP2112K-3.3TRG1), level-shifting N-channel MOSFETs (BSS138), resistors, and capacitors. The circuit interface includes I2C communication and power connections, facilitated through JST connectors. #referenceDesign #industrialsensing #liteon #template #reference-design

    luc

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-MINI-1U Reference Design 5vYz

    ESP32-S3-MINI-1U Reference Design 5vYz

    This project is a reference project for ESP32-S3-MINI-1U to develop your IoT ideas. The board has RGB LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template

    brodaquinfumfa

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-MINI-1 Reference Design

    ESP32-S3-MINI-1 Reference Design

    This project is a reference project for ESP32-S3-MINI-1 to develop your IoT ideas. The board has RGB LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    420elonsdoin69

    0 Uses

    0 Comments

    0 Stars

  • iot plant monitoring system

    iot plant monitoring system

    Project Title: Plant Monitoring and Irrigation System Overview: This system is based on the ESP32-S3 and is designed to manage irrigation for a multi-floor building. Key Features: Multi-Floor Operation: The system controls three separate floors. Each floor's irrigation can be managed independently. Irrigation and Pump Control: Each floor uses a solenoid valve to regulate water flow. The solenoid valves are operated via MOSFETs. A relay engages an AC water pump when a MOSFET triggers a solenoid valve. Hardware Interconnects: Screw Terminal connectors are added for connecting the solenoid valves and the motor pump. A DC Jack is included to supply power to the system. User Interface & Connectivity: Two JST connectors are provided for integrating an OLED display, a rotary encoder, and a pushbutton. Future enhancements may include the addition of soil moisture sensors. Remote Control: The system is designed for future integration with Blynk IoT. Blynk IoT will offer both manual control and timer-based irrigation modes for each floor.

    hemchand2025

    +

    0 Uses

    0 Comments

    0 Stars

  • Polygon showcase – Switched-Mode Power Supply (SMPS)

    Polygon showcase – Switched-Mode Power Supply (SMPS)

    This project is a Switched-Mode Power Supply (SMPS) design. The design incorporates an AC DC Converter (NCP1203D100R2), polarized capacitors, resistors, diodes, connectors, a transistor, a transformer and an integrated circuit. #AC #DC #POWER #NCP1203 #project

    giulioz

    0 Uses

    0 Comments

    0 Stars

  • ESP32-C3-WROOM-02U Reference Design

    ESP32-C3-WROOM-02U Reference Design

    This is a ESP32-C3-WROOM-02U reference design based on the manufacturer's recommendations. On board we have an ESP module, USB C for firmware, 2 connectors with IOs and RGB LED #ESP32 #WiFi #LED #IoT #BLE #ARM #referenceDesign #simple-embedded #espressif #template

    emitoldi

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design hdTm

    ESP32-S3-WROOM-1 Reference Design hdTm

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    brihamza

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    curtis

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    synduality

    0 Uses

    0 Comments

    0 Stars

  • Xeric Blue Lightcycle

    Xeric Blue Lightcycle

    This project is an innovative audio amplifier design focused on delivering high-quality sound and performance for commercial applications. The design features a robust 220V AC input that undergoes careful transformation, rectification, and regulation to provide a stable power supply. Central to the project is an audio amplifier circuit engineered to deliver a reliable 20W output, ensuring optimal sound clarity and efficiency. To enhance usability and connectivity, the design incorporates premium audio connectors for seamless input and output integration. This project prioritizes safety, efficiency, and scalability, positioning it as an ideal solution for fairs, events, and other commercial audio applications. #AudioAmplifier #220VAC #20WOutput #AudioConnectors #CommercialAudio #HighFidelitySound

    daitodll

    0 Uses

    0 Comments

    0 Stars

  • TP4056 Reference Design

    TP4056 Reference Design

    Reference design for Li-ion single cell charger based on TP4056 IC. Rprog setting output current to 900mA. VIN and BAT connector are block terminal connectors. #project #Template #referenceDesign #charger #TP4056 #referenceDesign #batterycharger #template #bms #reference-design

    000100

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    ergun

    0 Uses

    0 Comments

    0 Stars

  • TP4056 Reference Design

    TP4056 Reference Design

    Reference design for Li-ion single cell charger based on TP4056 IC. Rprog setting output current to 900mA. VIN and BAT connector are block terminal connectors. #project #Template #referenceDesign #charger #TP4056 #referenceDesign #batterycharger #template #bms #reference-design

    cheesusreal

    0 Uses

    0 Comments

    0 Stars

  • Climate Control System Reference Design ae07

    Climate Control System Reference Design ae07

    This is a climate control system reference design with a STM32WB5 microcontroller, power manager IC, USB Type-C, JST connectors, and an LCD driver. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #control #BLE #reference-design

    tyeth

    0 Uses

    0 Comments

    0 Stars

  • ESP32-C6-WROOM-1U Reference Design kd8r

    ESP32-C6-WROOM-1U Reference Design kd8r

    This is a ESP32-C6-WROOM-1U reference design built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

    harryet

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    jamesprakash

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design xhdX

    ESP32-S3-WROOM-1 Reference Design xhdX

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    sugarsd

    0 Uses

    0 Comments

    0 Stars

  • ESP32-C3-MINI-1 Reference Design

    ESP32-C3-MINI-1 Reference Design

    This is a reference design of ESP32-C3-MINI-1 based on the manufacturer's recommendations. On board we have an ESP module, USB C for firmware, 2 connectors with IOs and RGB LED #ESP32 #WiFi #LED #IoT #BLE #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

    jayabeer

    0 Uses

    0 Comments

    0 Stars

  • TMF8801 Time-of-Flight SensorBoard

    TMF8801 Time-of-Flight SensorBoard

    TMF8801-1BM time-of-flight (ToF) sensor from ams-OSRAM. It comprises electronic components such as resistors, capacitors, voltage regulators, and GPIO connectors. The logic signals are managed via Mosfets BSS138 while the Sensor IC is powered & controlled by a 3.3V AP2112K Voltage Regulator.

    michaelcox

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    readingseller

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design 1e6d

    ESP32-S3-WROOM-1 Reference Design 1e6d

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    calmarquez

    0 Uses

    0 Comments

    0 Stars

  • XIAO nRF52840 ESP32-S3 ESP32-C3 compact breakout board

    XIAO nRF52840 ESP32-S3 ESP32-C3 compact breakout board

    This is a compact breakout board with battery connectors, compatible with various Seeed boards such as the XIAO nRF52840, ESP32-S3, and ESP32-C3, designed for compact prototyping and integration.

    eliasho

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    poojithhg1

    0 Uses

    0 Comments

    0 Stars

  • WiFi Gesture Light Switch Reference Design 7sqg

    WiFi Gesture Light Switch Reference Design 7sqg

    This project is a WiFi Gesture Light Switch controlled by an ESP32 microcontroller. It leverages APDS-9960 and CH340C ICs for gesture recognition and USB communication respectively. Essential components include diodes for voltage protection, LEDs for status indication, and an AMS1117 voltage regulator to ensure a stable power supply. Connectors like USB Type-C are used for power and data transfers. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

    esqueva-dev

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design 4nh8

    ESP32-S3-WROOM-1 Reference Design 4nh8

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    datt

    0 Uses

    0 Comments

    0 Stars

  • TP4056 Module

    TP4056 Module

    Reference design for Li-ion single cell charger based on TP4056 IC. Rprog setting output current to 900mA. VIN and BAT connector are block terminal connectors. #Template #module #referenceDesign #charger #TP4056 #reusable #module #batterycharger #sublayout

    dinhhau

    0 Uses

    0 Comments

    0 Stars

  • ESP32-C6-WROOM-1U Reference Design

    ESP32-C6-WROOM-1U Reference Design

    This is a ESP32-C6-WROOM-1U reference design built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

    haouechiheb

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design 52b2

    ESP32-S3-WROOM-1 Reference Design 52b2

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    fabianu2t

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design aAg6

    ESP32-S3-WROOM-1 Reference Design aAg6

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    shiivammmm

    0 Uses

    0 Comments

    0 Stars

  • ESP32-S3-WROOM-1 Reference Design rXeX

    ESP32-S3-WROOM-1 Reference Design rXeX

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    pesgard

    0 Uses

    0 Comments

    0 Stars

  • ESP32-C6-WROOM-1 Reference Design eva3 uvfC

    ESP32-C6-WROOM-1 Reference Design eva3 uvfC

    This is a ESP32-C6-WROOM-1 reference design built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

    motamman

    0 Uses

    0 Comments

    0 Stars

  • ESP32-C6-MINI-1U Reference Design

    ESP32-C6-MINI-1U Reference Design

    This is a ESP32-C6-MINI-1U reference design built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

    vasyl

    0 Uses

    0 Comments

    0 Stars

  • DC-005-5A-3.0-BUG

    DC-005-5A-3.0-BUG

    DC Power Receptacle 3mm 6.2mm 5A 24V Plugin AC/DC Power Connectors ROHS

    vasyl

    0 Uses

    0 Comments

    0 Stars

  • presence-sensing-esp32-c3

    presence-sensing-esp32-c3

    A presence sensing device powered by a mean well AC DC converter with a ESP32 C3 for it's brain plus a ld2410 mmwave module. the relay can be used to switch mains power. the ld2410 is connected through the terminal connectors.

    d4zenl

    0 Uses

    0 Comments

    0 Stars