USB-C powered ESP32 WiFi water flow meter interface for a 3/4 inch PVC ultrasonic RS485 flow sensor, including 12V sensor power, 3.3V logic power, protection, status LEDs, and programming/reset support.
Wi-Fi LED strip controller made with few goals:
Dual voltage support 12V and 24V
2 independent channels for color temperature adjustments
No high pitch noise in all modes
Powerful enough to handle current up to 17.5A (in total, limited by connectors)
Control buttons on the device body
Connectors for external buttons
Can be used with already installed LED strips
Support of open source firmware, like https://esphome.io/
This is a WiFi to Infrared (IR) gateway reference design leveraging an ESP32-S3 microcontroller for WiFi connectivity. It also incorporates a Type-C USB interface for data and power, 3 LEDs (red, green, & IR), and voltage regulation. It facilitates wireless control of IR devices, suitable for home automation projects.
#referenceDesign #edge-computing #espressif #template #IR #project #reference-design
This is a WiFi to Infrared (IR) gateway reference design leveraging an ESP32-S3 microcontroller for WiFi connectivity. It also incorporates a Type-C USB interface for data and power, 3 LEDs (red, green, & IR), and voltage regulation. It facilitates wireless control of IR devices, suitable for home automation projects.
#referenceDesign #edge-computing #espressif #template #IR #project #reference-design
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This is a WiFi to Infrared (IR) gateway reference design leveraging an ESP32-S3 microcontroller for WiFi connectivity. It also incorporates a Type-C USB interface for data and power, 3 LEDs (red, green, & IR), and voltage regulation. It facilitates wireless control of IR devices, suitable for home automation projects.
#referenceDesign #edge-computing #espressif #template #IR #project #reference-design
This is a reference design WiFi remote control utilizing an ESP32-PICO. It includes a battery circuit, a buzzer, and multiple control buttons for inputs.
#referenceDesign #simple-embedded #espressif #project #button #esp #template #reference-design
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini.
A mini wifi board with 4MB flash based on ESP-8266EX
#wemos #esp8266 #project-template #template
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This project is a WiFi RF-ID Lock, which uses a Espressif ESP-8684 microcontroller for WiFi connectivity and a Handson Technology RC522 for RF-ID functionality. It also includes an OLED display and user control via a switch. A step-up power converter ensures consistent 3.3V power.
#WiFi #MCU #ReferenceDesign #project #ESP8684 #lock #OLED #referenceDesign #simple-embedded #espressif #template #reference-design
Consumer USB-C powered low-power environmental sensor node using a Wi-Fi + Bluetooth LE MCU module, digital temperature/humidity sensor, USB-C 5 V input, and protected 3.3 V power architecture sized for 0.5–3 A USB-C sources.
Consumer USB-C environmental sensor node using a low-power Wi-Fi + Bluetooth MCU and digital temperature/humidity sensor. Powered from 5 V USB-C sink input with input protection including reverse blocking, OVP, UVLO, and overcurrent limiting, then regulated to 3.3 V for the radio and sensor.
Low-power consumer environmental sensor node with USB-C 5V input, Wi-Fi + Bluetooth connectivity, digital temperature/humidity sensing, and protected 5V-to-3.3V power architecture including reverse, OVP, UVLO, and OCP considerations.
Low-power consumer temperature/humidity sensor node powered from USB-C 5V, using a Wi-Fi + BLE 5.x MCU, digital T/RH sensor, USB-C sink configuration, protected 5V input path, and efficient 3.3V regulation.
Low-power USB-C 5V environmental temperature/humidity sensor node with Wi-Fi 2.4GHz b/g/n and BLE 5.x connectivity, protected 5V input, and 3.3V digital sensor/MCU rail.
Termostato da incasso con NodeMCU ESP8266, sensore DS18B20, alimentazione isolata 230 Vac, uscita relè SPDT a contatto pulito per caldaia e controllo via pagina web Wi-Fi.
This project is a WiFi RF-ID Lock, which uses a Espressif ESP-8684 microcontroller for WiFi connectivity and a Handson Technology RC522 for RF-ID functionality. It also includes an OLED display and user control via a switch. A step-up power converter ensures consistent 3.3V power.
#WiFi #MCU #ReferenceDesign #project #ESP8684 #lock #OLED #referenceDesign #simple-embedded #espressif #template #reference-design
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This is a WiFi to Infrared (IR) gateway reference design leveraging an ESP32-S3 microcontroller for WiFi connectivity. It also incorporates a Type-C USB interface for data and power, 3 LEDs (red, green, & IR), and voltage regulation. It facilitates wireless control of IR devices, suitable for home automation projects.
#referenceDesign #edge-computing #espressif #template #IR #project #reference-design
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This project uses an ESP32 microcontroller and OV2640 camera to create a WiFi-enabled digital camera. It uses AMS1117 voltage regulators to provide regulated power, a CH340C for USB communication, and includes capacitors and resistors for circuit balance. Ideal for IoT and edge computing tasks. #referenceDesign #project #ESP32 #ESP32WROVER #RF #WIFI #MCU #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This is a WiFi RF-ID Reader Template based on ESP32-S2-mini module and RC522 is a 13.56MHz RFID module #smartHome #ESP32S2 #ESP32 #Thread #Zigbee #BMD340 #wifi #gateway #referenceDesign #project #template #hub
This is a WiFi to Infrared (IR) gateway reference design leveraging an ESP32-S3 microcontroller for WiFi connectivity. It also incorporates a Type-C USB interface for data and power, 3 LEDs (red, green, & IR), and voltage regulation. It facilitates wireless control of IR devices, suitable for home automation projects.
#referenceDesign #edge-computing #espressif #template #IR #project #reference-design
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This is a WiFi to Infrared (IR) gateway reference design leveraging an ESP32-S3 microcontroller for WiFi connectivity. It also incorporates a Type-C USB interface for data and power, 3 LEDs (red, green, & IR), and voltage regulation. It facilitates wireless control of IR devices, suitable for home automation projects.
#referenceDesign #edge-computing #espressif #template #IR #project #reference-design
This is a WiFi RF-ID Reader Template based on ESP32-S2-mini module and RC522 is a 13.56MHz RFID module #smartHome #ESP32S2 #ESP32 #Thread #Zigbee #BMD340 #wifi #gateway #referenceDesign #project #template #hub
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This project is a WiFi RF-ID Lock, which uses a Espressif ESP-8684 microcontroller for WiFi connectivity and a Handson Technology RC522 for RF-ID functionality. It also includes an OLED display and user control via a switch. A step-up power converter ensures consistent 3.3V power.
#WiFi #MCU #ReferenceDesign #project #ESP8684 #lock #OLED #referenceDesign #simple-embedded #espressif #template #reference-design
This is a WiFi RF-ID Reader Template based on ESP32-S2-mini module and RC522 is a 13.56MHz RFID module #smartHome #ESP32S2 #ESP32 #Thread #Zigbee #BMD340 #wifi #gateway #referenceDesign #project #template #hub
This is a Thread to WiFi Gateway Template based on BMD-340-A-R Transceiver Module and ESP32-S2-mini module #smartHome #ESP32S2 #ESP32 #Thread #Zigbee #BMD340 #wifi #gateway #referenceDesign #project #template #hub
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
This project is a WiFi RF-ID Lock, which uses a Espressif ESP-8684 microcontroller for WiFi connectivity and a Handson Technology RC522 for RF-ID functionality. It also includes an OLED display and user control via a switch. A step-up power converter ensures consistent 3.3V power.
#WiFi #MCU #ReferenceDesign #project #ESP8684 #lock #OLED #referenceDesign #simple-embedded #espressif #template #reference-design
This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control.
#WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design
