• Arduino Nano RP2040

    Arduino Nano RP2040

    Arduino Nano RP2040 Connect with Headers - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #template #part

    qwertyglitch

    qwertyglitch

    1 Comment

  • Arduino Nano RP2040 o1Tg

    Arduino Nano RP2040 o1Tg

    Arduino Nano RP2040 Connect with Headers - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #template #part

    yodogimbored

    yodogimbored

    1 Comment

  • Arduino Nano RP2040

    Arduino Nano RP2040

    Arduino Nano RP2040 Connect with Headers - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #template #part

    yodogimbored

    yodogimbored

    1 Comment

  • Arduino Nano RP2040 e6Sn

    Arduino Nano RP2040 e6Sn

    Arduino Nano RP2040 Connect with Headers - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #template #part

    shashwath

    shashwath

    1 Comment

  • Guitar Pedal Template oSBz

    Guitar Pedal Template oSBz

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply, a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. size is a good default size for a 125B enclosure. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. Meant to be used with the 3PDT Breakout Board on my profile. #template

    sepukkake

    sepukkake

    1 Comment

  • Guitar Pedal Template

    Guitar Pedal Template

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply, a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. size is a good default size for a 125B enclosure. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. Meant to be used with the 3PDT Breakout Board on my profile. #template

    krux12

    krux12

    1 Comment

  • Arduino Nano RP2040

    Arduino Nano RP2040

    Arduino Nano RP2040 Connect with Headers - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #template #part

    pavlo77

    pavlo77

    1 Comment

  • WiFi Camera with Motion Detection Reference Design b8QC

    WiFi Camera with Motion Detection Reference Design b8QC

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    darkwolf7980

    darkwolf7980

    1 Comment

  • Random Transistor Overdrive

    Random Transistor Overdrive

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply (including LED), a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. #template

    puig

    puig

    1 Comment

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    itsspoo18

    itsspoo18

    1 Comment

  • Guitar Pedal Template 5x5c

    Guitar Pedal Template 5x5c

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply, a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. size is a good default size for a 125B enclosure. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. Meant to be used with the 3PDT Breakout Board on my profile. #template

    mikefox

    1 Comment

  • Random Transistor Overdrive

    Random Transistor Overdrive

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply (including LED), a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. #template

    nickelthrower

    1 Comment

  • Testing guides on large docs

    Testing guides on large docs

    The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Arduino combination with various headers and connections, eliminating the need to stack multiple shields.

    jatin-test

    1 Comment

  • Arduino Nano RP2040 hozT

    Arduino Nano RP2040 hozT

    Arduino Nano RP2040 Connect with Headers - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #template #part

    axquique12

    1 Comment

  • Arduino Nano RP2040 s2Vf

    Arduino Nano RP2040 s2Vf

    Arduino Nano RP2040 Connect with Headers - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #template #part

    gerald1983

    1 Comment

  • Quadcopter-Naze-32

    Quadcopter-Naze-32

    Naze 32 Revision 6 Flight Controller Schematic At the heart of the Naze32 is a 32bit ST micro work horse of a processor, with untapped memory and cpu power and a host of equally impressive sensors. The Naze is also matched up with some of the nicest GUI programs and features to get the most out of your configuration. Naze32 rev6 Features: USB on right side PPM/PWM input as through-hole 3.3V, I2C on standard-size headers Fully pinout compatible with rev5 accessories (OSDoge etc) SBUS Inverter Spectrum satellite MPU6500 Sonar pads w/resistors added for direct connection to 5V sonar All extra pads (FT, GP, A5) on top, only sonar on bottom BMP280 barometer 16mbit flash Guide: https://www.dronetrest.com/t/naze-32-revision-6-flight-controller-guide/1605

    ihscielle

    1 Comment

  • Arduino Nano RP2040

    Arduino Nano RP2040

    Arduino Nano RP2040 Connect with Headers - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #template #part

    elecr0cris

    1 Comment

  • Guitar Pedal Template

    Guitar Pedal Template

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply, a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. size is a good default size for a 125B enclosure. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. Meant to be used with the 3PDT Breakout Board on my profile. #template

    ettore2

    1 Comment

  • Arduino Nano RP2040

    Arduino Nano RP2040

    Arduino Nano RP2040 Connect with Headers - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #template #part

    axquique12

    1 Comment

  • Arduino Nano RP2040

    Arduino Nano RP2040

    Arduino Nano RP2040 Connect with Headers - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #template #part

    jnonymous2

    1 Comment

  • NINA-W102, RP2040 Template

    NINA-W102, RP2040 Template

    NINA-W102, RP2040 Arduino Nano RP2040 Connect with Headers series ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #NINA-W102 #RP2040 #Arduino #EvaluationBoard #template #project

    jecstronic

    1 Comment

  • ESP32 RS485 (Modbus) Controller Reference Design ibga

    ESP32 RS485 (Modbus) Controller Reference Design ibga

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation, and headers for connecting sensors and actuators. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated #reference-design

    emryou42

    1 Comment

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    degamisu

    1 Comment

  • Arduino Nano RP2040

    Arduino Nano RP2040

    Arduino Nano RP2040 Connect with Headers - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #template #part

    reneca2004

    1 Comment

  • Arduino Nano RP2040

    Arduino Nano RP2040

    Arduino Nano RP2040 Connect with Headers - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #template #part

    onur

    1 Comment

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    0vervoltage

    1 Comment

  • Guitar Pedal Template gPyB

    Guitar Pedal Template gPyB

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply (including LED), a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. #template

    pitervera

    1 Comment

  • Arduino Nano RP2040

    Arduino Nano RP2040

    Arduino Nano RP2040 Connect with Headers - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #template #part

    sun2024

    1 Comment

  • SparkFun Redbot Mainboard Dev Board

    SparkFun Redbot Mainboard Dev Board

    The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Arduino combination with various headers and connections, eliminating the need to stack multiple shields.

    chris

    1 Comment

  • Guitar Pedal Template

    Guitar Pedal Template

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply, a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. size is a good default size for a 125B enclosure. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. Meant to be used with the 3PDT Breakout Board on my profile. #template

    ljes

    1 Comment

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    diego6857432

    1 Comment

  • Jiji v3

    Jiji v3

    ESP32-S3 CAM Audio-Visual Controller with I2S MEMS Microphone, Class-D Amplifier, SPI Display, Servos, Capacitive Touch and Integrated USB-C Power-Only Sink (VBUS via J6 -> 5V_IN -> SW1:P1 -> 5V_SW, CC1/CC2 5.1 kOhm to GND, VBUS TVS Surge Protection) + Added optional bulk electrolytic caps on 5V_SW near servo headers

    summerexe

  • Continuous Fuchsia P.K.E. Meter

    Continuous Fuchsia P.K.E. Meter

    Universal 12V ESP32 Automation Motherboard with MOSFET Outputs, A4988 Stepper Socket, LM2596 5V Regulator & Expansion Headers

    zubieboards

  • Dominant Plum Speeder Bike

    Dominant Plum Speeder Bike

    3.3V ESP32-S3 Dual 6V Rail MOSFET Board with MCP23017 I2C Expanders, Option C Gate Network, SW2 DPST Rail-Interlock, 2S LiFePO4 Charger/BMS (BQ24618 + BQ29209) with Series Battery Wiring and Charge Integration, and 2×10 RA Headers (#MCP23017_3V3 #OptionC #GateNetwork #RailInterlock #Dual6V #BQ24618 #BQ29209 #2S #LiFePO4 #SeriesBattery #ChargeIntegration #RAHeaders)

    mikep6345

  • WiFi Camera with Motion Detection Reference Design dff9

    WiFi Camera with Motion Detection Reference Design dff9

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    danilo23

  • WiFi Camera with Motion Detection Reference Design 0a56

    WiFi Camera with Motion Detection Reference Design 0a56

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    danilo23

  • Guitar Pedal Template aynn

    Guitar Pedal Template aynn

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply (including LED), a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. #template

    devins666

  • Guitar Pedal Template

    Guitar Pedal Template

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply (including LED), a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. #template

    devins666

  • Guitar Pedal Template

    Guitar Pedal Template

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply, a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. size is a good default size for a 125B enclosure. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. Meant to be used with the 3PDT Breakout Board on my profile. #template

    dacre

  • Guitar Pedal Template

    Guitar Pedal Template

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply, a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. size is a good default size for a 125B enclosure. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. Meant to be used with the 3PDT Breakout Board on my profile. #template

    earwvrm

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    theadk

  • Guitar Pedal Template

    Guitar Pedal Template

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply, a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. size is a good default size for a 125B enclosure. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. Meant to be used with the 3PDT Breakout Board on my profile. #template

    henrique

  • Guitar Pedal Template

    Guitar Pedal Template

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply, a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. size is a good default size for a 125B enclosure. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. Meant to be used with the 3PDT Breakout Board on my profile. #template

    drinkbepis

  • Guitar Pedal Template

    Guitar Pedal Template

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply, a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. size is a good default size for a 125B enclosure. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. Meant to be used with the 3PDT Breakout Board on my profile. #template

    gorgathious

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    ricra

  • ESP32 RS485 (Modbus) Controller Reference Design

    ESP32 RS485 (Modbus) Controller Reference Design

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation, and headers for connecting sensors and actuators. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated #reference-design

    pabloa2008

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    pabloa2008

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    codygermany

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    jordanlow

  • Guitar Pedal Template

    Guitar Pedal Template

    Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply, a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. size is a good default size for a 125B enclosure. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. Meant to be used with the 3PDT Breakout Board on my profile. #template

    strat