This is a ESP32-H2-MINI-1 module built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #reusable #module #simple-embedded #espressif #sublayout

Firefly Board is part of a smart network designed for wireless control of light, water and other parts of the house in locations where GSM communication and WiFi are not available. #LoRa #smart #IoT #power #led #arm #stm32

BGA289C80P17X17_1400X1400X132N NXP Semiconductors SOC i.MX 6ULL ARM Cortex A7 CMOS 289-Pin LFBGA Tray https://pricing.snapeda.com/search/part/MCIMX6Y0CVM05AB/?ref=eda None MCIMX6Y0CVM05AB In Stock None Aliases: undefined

This is example board for creating cool projects with stm32 (this board based on STM32F031F6P6) #stm32 #arm #f0 #module

This HAT will provide your project with energy not only DC but also AC. Also, the Nucleo-32(Nano) form factor expands the horizon of creative ideas #mppt #ARM #energy #stm32 #solar #dc #ac

This is a ESP32-C3-WROOM-02 reference design based on the manufacturer's recommendations. On board we have an ESP module, USB C for firmware, 2 connectors with IOs and RGB LED #ESP32 #WiFi #LED #IoT #BLE #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

BGA289C80P17X17_1400X1400X132N None None Not in stock SOC i.MX 6ULL ARM Cortex A7 CMOS 289-Pin LFBGA Tray MCIMX6Y0CVM05AB NXP Semiconductors Aliases: undefined

This is a ESP32-C6-WROOM-1 reference design built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

This is example board for creating cool projects with stm32 (this board based on STM32F031F6P6) #stm32 #arm #f0 #module

This is a reference design of ESP32-C3-MINI-1 based on the manufacturer's recommendations. On board we have an ESP module, USB C for firmware, 2 connectors with IOs and RGB LED #ESP32 #WiFi #LED #IoT #BLE #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

BGA289C80P17X17_1400X1400X132N NXP Semiconductors SOC i.MX 6ULL ARM Cortex A7 CMOS 289-Pin LFBGA Tray https://pricing.snapeda.com/search/part/MCIMX6Y0CVM05AB/?ref=eda None MCIMX6Y0CVM05AB In Stock None Aliases: undefined

This is a ESP32-H2-MINI-1 module built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #reusable #module #simple-embedded #espressif #sublayout

This is the general design of the R7FA4M1AB3CFM with the minimum configuration for its operation and USB C with LDO and SD card #arm #M4 #IoT #referenceDesign #mcu #renesas #template #reference-design

Minimal components Sub Layout for STM32F030 Value Line ARM Cortex-M0 MCU with crystal

Dual core, Wi-Fi: 2.4 GHz up to 150 Mbits/s,BLE (Bluetooth Low Energy) and legacy Bluetooth, 32 bits, Up to 240 MHz #esp32 #ble #wifi #arm

Minimal components Sub Layout for STM32F030 Value Line ARM Cortex-M0 MCU with crystal

Minimal components Sub Layout for STM32F030 Value Line ARM Cortex-M0 MCU with crystal

Dual core, Wi-Fi: 2.4 GHz up to 150 Mbits/s,BLE (Bluetooth Low Energy) and legacy Bluetooth, 32 bits, Up to 240 MHz #esp32 #ble #wifi #arm

Minimal components Sub Layout for STM32F030 Value Line ARM Cortex-M0 MCU with crystal

Minimal components Sub Layout for STM32F030 Value Line ARM Cortex-M0 MCU with crystal

A simple template to easily create your XIAO SAMD21 shield #ARM #SAMD21 #Arduino #template

Dual core, Wi-Fi: 2.4 GHz up to 150 Mbits/s,BLE (Bluetooth Low Energy) and legacy Bluetooth, 32 bits, Up to 240 MHz #esp32 #ble #wifi #arm

This is the general design of the R7FA4M1AB3CFM with the minimum configuration for its operation and USB C with LDO and SD card #arm #M4 #IoT #referenceDesign #mcu #renesas #template #reference-design

Minimal components Sub Layout for STM32F030 Value Line ARM Cortex-M0 MCU with crystal

sEMG-DAQ is a wearable 6 channel data acquisition unit for capturing surface electromyographic (sEMG) signals from human arm muscles using SJ2-3593D jack connectors while conditioning, digitizing, processing and transmitting them as sEMG data to an external AI accelerated board through an SM12B-SRSS IDC connector where AI models are run for various applications including robotic control, muscle signals medical assessment and gesture recognition. The board leverages an INA125P instrumentation amplifier together with filter stages utilizing LM324QT op-amps for conditioning and an STM32G4A1VET6 microcontroller for the digitization, processing and data transmission of the signals. Since AI models can only be as good as the data, the design of such a DAQ is necessary to ensure clean, reliable and real-time data for AI applications requiring sEMG data. The board also has USB-FS and JTAG to cater for debugging. The power (5V) is fed through a screw terminal and is regulated by two LDK320AM LDO regulators to offer 5V, 3.3V and 1.8V to meet the requirements of various components on the board.

Firefly Board is part of a smart network designed for wireless control of light, water and other parts of the house in locations where GSM communication and WiFi are not available. #LoRa #smart #IoT #power #led #arm #stm32

This is example board for creating cool projects with stm32 (this board based on STM32F031F6P6) #stm32 #arm #f0 #module

This is a ESP32-C6-MINI-1 reference design built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

This is a reference design of ESP32-C3-MINI-1 based on the manufacturer's recommendations. On board we have an ESP module, USB C for firmware, 2 connectors with IOs and RGB LED #ESP32 #WiFi #LED #IoT #BLE #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

Nirikshan AI Smart Glass - Temple Arm HDI PCB

This is the general design of the R7FA4M1AB3CFM with the minimum configuration for its operation and USB C with LDO and SD card #arm #M4 #IoT #referenceDesign #mcu #renesas #template #reference-design

Robust MCU-Based Control Board for Safety-Critical Robotic Kitchen Arm with Advanced Power Management, Sensor I/O, and Multi-Protocol Connectivity

This is example board for creating cool projects with stm32 (this board based on STM32F031F6P6) #stm32 #arm #f0 #module

This is a ESP32-C3-WROOM-02U reference design based on the manufacturer's recommendations. On board we have an ESP module, USB C for firmware, 2 connectors with IOs and RGB LED #ESP32 #WiFi #LED #IoT #BLE #ARM #referenceDesign #simple-embedded #espressif #template

This is a ESP32-C3-WROOM-02U reference design based on the manufacturer's recommendations. On board we have an ESP module, USB C for firmware, 2 connectors with IOs and RGB LED #ESP32 #WiFi #LED #IoT #BLE #ARM #referenceDesign #simple-embedded #espressif #template

Dual core, Wi-Fi: 2.4 GHz up to 150 Mbits/s,BLE (Bluetooth Low Energy) and legacy Bluetooth, 32 bits, Up to 240 MHz #esp32 #ble #wifi #arm

This is example board for creating cool projects with stm32 (this board based on STM32F031F6P6) #stm32 #arm #f0 #module

This is example board for creating cool projects with stm32 (this board based on STM32F031F6P6) #stm32 #arm #f0 #module

Dual core, Wi-Fi: 2.4 GHz up to 150 Mbits/s,BLE (Bluetooth Low Energy) and legacy Bluetooth, 32 bits, Up to 240 MHz #esp32 #ble #wifi #arm

This is a ESP32-C3-WROOM-02U reference design based on the manufacturer's recommendations. On board we have an ESP module, USB C for firmware, 2 connectors with IOs and RGB LED #ESP32 #WiFi #LED #IoT #BLE #ARM #referenceDesign #simple-embedded #espressif #template

This project is a LoRa-based leak sensor reference design. It incorporates an STM32 MCU and a RFM95W LoRa module #LoRa #STM32 #ARM #referenceDesign #simple-embedded #raspberrypi #template #reference-design

This project is a LoRa-based leak sensor reference design. It incorporates an STM32 MCU and a RFM95W LoRa module #LoRa #STM32 #ARM #referenceDesign #simple-embedded #raspberrypi #template #reference-design

This project is a LoRa-based leak sensor reference design. It incorporates an STM32 MCU and a RFM95W LoRa module #LoRa #STM32 #ARM #referenceDesign #simple-embedded #raspberrypi #template #reference-design

This project involves designing a complete schematic for a robotic arm controller based on the ESP32-C3 microcontroller, specifically using the ESP32-C3-MINI-1-N4 module. The design features a dual power input system and comprehensive power management, motor control, I/O interfaces, and status indicators—all implemented on a 2-layer PCB. Key Specifications: Microcontroller: • ESP32-C3-MINI-1-N4 module operating at 3.3V. • Integrated USB programming connections with reset and boot mode buttons. Power System: • Dual power inputs with automatic source selection: USB-C port (5V input) and barrel jack (6-12V input). • Power management using LM74610 smart diode controllers for power source OR-ing. • AMS1117-3.3 voltage regulator to deliver a stable 3.3V supply to the microcontroller. • Filter capacitors (10μF electrolytic and 100nF ceramic) at the input and output of the regulators. • Protection features including USBLC6-2SC6 for USB ESD protection and TVS diodes for barrel jack overvoltage protection. Motor Control: • Incorporates an Omron G5LE relay with a PC817 optocoupler and BC547 transistor driver. • Provides dedicated header pins for servo motors with PWM outputs. • Flyback diode protection implemented for relay safety. I/O Connections: • Header pins exposing ESP32-C3 GPIOs: Digital I/O (IO0-IO10, IO18, IO19) and serial communication lines (TXD0, RXD0), plus an enable pin. • Each I/O pin includes appropriate 10kΩ pull-up/pull-down resistors to ensure reliable performance. Status Indicators: • A power status LED with a current-limiting resistor. • A user-controllable LED connected to one of the GPIO pins. PCB Layout Requirements: • 2-layer PCB design with separate ground planes for digital and power sections. • Placement of decoupling capacitors close to power pins to reduce noise. • Adequate trace width for power lines to ensure efficient current flow. • Inclusion of mounting holes at the board corners for secure installation. • All components are properly labeled with correct values for resistors, capacitors, and other passive elements, following standard design practices for noise reduction, stability, and reliability. #RoboticArmController #ESP32C3 #SchematicDesign #PCBDesign #ElectronicsDesign #PowerManagement #MotorControl #EmbeddedSystems #IoT

XIAO MG24 Sense is an ultra-low-power wireless development board based on Silicon Labs' EFR32MG24 SoC, featuring a high-performance 78MHz ARM Cortex®-M33 core. It‘s Matter® native over Thread® and Bluetooth® Low Energy 5.3, all supported by the Arduino® Core. With 4MB Flash onboard, 19 GPIOs, LED, and charging circuit onboard, it boasts extremely low operating current and ultra-low-power modes, making it an ideal choice for IoT applications, especially battery-powered projects utilizing Matter® protocols. Additionally, the onboard analog microphone and six-axis IMU sensors make XIAO MG24 Sense a great fit for TinyML applications such as posture detection

This is example board for creating cool projects with stm32 (this board based on STM32F031F6P6) #stm32 #arm #f0 #module

This is a ESP32-C6-WROOM-1U reference design built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

Dual core, Wi-Fi: 2.4 GHz up to 150 Mbits/s,BLE (Bluetooth Low Energy) and legacy Bluetooth, 32 bits, Up to 240 MHz #esp32 #ble #wifi #arm

Dual core, Wi-Fi: 2.4 GHz up to 150 Mbits/s,BLE (Bluetooth Low Energy) and legacy Bluetooth, 32 bits, Up to 240 MHz #esp32 #ble #wifi #arm

This is a reference design of ESP32-C3-MINI-1 based on the manufacturer's recommendations. On board we have an ESP module, USB C for firmware, 2 connectors with IOs and RGB LED #ESP32 #WiFi #LED #IoT #BLE #ARM #referenceDesign #simple-embedded #espressif #template #reference-design