Haptic Glove Controller Board NUCLEO-F411RE based Fixed Servo Connections to match standard servo wiring Revised footprint of 2n3904s transistors since base and emitter footprint were swapped Larger power traces Swapped SDO and SDI of SPI Lines to the FPC connector so it matches with peripheral.

RP2040 is a low-cost, high-performance microcontroller device with flexible digital interfaces. Key features: • Dual Cortex M0+ processor cores, up to 133 MHz • 264 kB of embedded SRAM in 6 banks • 30 multifunction GPIO • 6 dedicated IO for SPI Flash (supporting XIP) • Dedicated hardware for commonly used peripherals • Programmable IO for extended peripheral support • 4 channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion • USB 1.1 Host/Device

10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

3D Camera Module is a scalable SPI enabled 4 camera array pinout for 3D photogrammetry reconstruction which uses I2C to connect between each module to expand camera capacity while keeping capture sequences in sync. It uses ATMega32U4 with its built in USB 2.0 for data transfer and camera array adjustments and capture as well as a micro SD card slot for local image storage. An interrupt logic pinout should be used on the SPI master module as capture command. Each module is powered via USB-C (5V) or barrel jack (12V regulated to 5V).

10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

This is a LoRa remote control project built around a Raspberry Pi RP2040 SoC and the RFM95W LoRa module. The design includes user interface features such as multiple buttons and LEDs, power management components, and a temperature sensor. The project utilizes SPI, I2C, and USB interfaces for communication and control. #referenceDesign #simple-embedded #raspberrypi #lora #template #reference-design

10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer. This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. There's an address selection pin so you can have two accelerometers share an I2C bus

Accelerometer, Gyroscope, Magnetometer, 9 Axis Sensor I²C, SPI Output

10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

Humidity Temperature Sensor 0 ~ 100% RH I²C, SPI ±3% with 4 pins

Reusable ESP32-WROOM golf ball dispenser interface board with protected 12V to 24V input power, one conditioned coin pulse input, SPDT relay dry-contact output, open-collector output, Bluetooth pulse generation, screw-terminal field wiring, and optional UART programming access.

Modular ESP32 dev-board smart photobioreactor controller with 12 V input protection, 5 V buck conversion, 3.3 V regulation, connectorized sensors and actuators, I2C LCD and RTC, SPI SD logging, GPIO breakout, test points, and prototype-friendly high-power/low-power partitioning.

4-layer marine GPS timing and communication device using nRF52840, u-blox ZED-F9P GNSS with external active antenna via u.FL, 915 MHz LoRa radio, Li-ion battery with USB-C charging, separate clean GNSS LDO and digital 3.3V rail, SPI memory LCD, RGB LEDs, buzzer, and 6-axis IMU. PCB target is a 70 mm circular layout with strict RF zoning, dedicated ground plane, 50 ohm RF traces, physical separation between GNSS and LoRa, and low-noise placement suitable for harsh marine environments.

Glove interface board using Seeed Studio XIAO ESP32S3. Manufacturing path updated for partial assembly: preserve existing glove interface circuitry (FSR inputs on J3-J7, I2C on J8, SPI on J9, pull resistors R1-R7, decoupling C1) and source U1 separately because JLCPCB stock for MPN 113991114 is unavailable. Assemble all other parts normally, leave U1 for customer-supplied/manual installation, and do not substitute U1 unless a verified XIAO-format pin-compatible replacement is explicitly approved.

FlowState Headband EVT1 — 4-Channel EEG Calibration Device Closed-loop EEG neurofeedback headband for theta/beta baseline calibration. 4-layer mixed-signal PCB, 40x30mm. Core ICs: - ADS1299-4PAG (TI) — 4-channel 24-bit EEG analog front end, SPI interface, 250 SPS - nRF5340 (Nordic) — Dual-core BLE 5.3 SoC, 128 MHz app core + 64 MHz network core Key requirements: - Separate analog and digital power domains (dual LDO: LP5907 for AVDD, AP2112 for DVDD) - Split analog/digital ground planes with single-point connection - 6 electrode inputs (4 active + 1 reference + 1 DRL) with individual TVS ESD protection on each - LIS2DH12 accelerometer (I2C) for motion artifact detection - MCP73831 USB-C battery charging (300-500 mAh LiPo) - 2.4 GHz chip antenna or PCB trace antenna at board edge with 10mm keepout - Conformal coating for sweat/moisture protection Reference designs: - Analog front-end: TI ADS1299 EVM (SBAS499) - Digital/BLE: Nordic nRF5340 DK reference schematic Critical constraint: Microvolt-level EEG signals — analog input routing and power supply filtering are the highest-priority layout concerns.

Termostato da incasso con NodeMCU ESP8266, sensore DS18B20, alimentazione isolata 230 Vac, uscita relè SPDT a contatto pulito per caldaia e controllo via pagina web Wi-Fi.

Production-defensible Rev B ear tag tracker using nRF9151 with separate LTE and GNSS antennas, solar-assisted LiPo charging, battery protection, SPI NOR flash, NFC, eSIM, I2C sensors, Tag-Connect SWD, grouped EVT test points, and RF/power zoning on a 40 mm x 24 mm 4-layer PCB.

Misty Pink Replicator schematic finalized for layout handoff with ESP32-S3, USB-C battery charging, T5838 always-on wake microphone, CI1302 backup ASR analog microphone front end, HTEW0154T8 SPI e-ink display, standardized power/test nets, and final ERC-clean baseline.

Ultra-Compact 2-Layer PCB Redesign with Preserved Stackup and Net Classes (SPI / Analog / Power)

New users at Temu receive a 40% Off discount on orders over 40% Off Use the code ["acx420275" or "acr841270"] during checkout to get Temu Discount 40% off For New Users. You can save 40% Off off your first order with the Promo Code available for a limited time only. Extra 30% off for new and existing customers + Up to $40 Off % off & more. Temu Promo Codes for New users-["ACX420275" or "acx420275"] Temu discount code for New customers- ["ACX420275" or "acx420275"] Temu $40 Off Promo Code- ["ACX420275" or "acx420275"] what are Temu codes- "ACX420275" or "acx420275" does Temu give you $40 Off - ["ACX420275" or "acx420275"] Yes Verified Temu New customer offer {"ACX420275" or "acx420275"} Temu discount code 2026 {"ACX420275" or "acx420275"} 100 off Promo Code Temu {"ACX420275" or "acx420275"} Temu 100% off any order {"ACX420275" or "acx420275"} 100 dollar off Temu code {"ACX420275" or "acx420275"} Temu coupon $40 Off off for New customers There are a number of discounts and deals shoppers n take advantage of with the Teemu Coupon Bundle ["ACX420275" or "acx420275"]. Temu coupon $40 Off off for New customers ["ACX420275" or "acx420275"] will save you $40 Off on your order. To get a discount, click on the item to purchase and enter the code. You n think of it as a supercharged savings pack for all your shopping needs Temu Promo Code 80% off – ["ACX420275" or "acx420275"] Free Temu codes 50% off – ["ACX420275" or "acx420275"] Temu coupon $40 Off off – ["ACX420275" or "acx420275"] Temu buy to get ₱39 – ["ACX420275" or "acx420275"] Yes, Temu offers 40% off coupon code [{"acx420275" or "acr841270"}] for first-time users. You can get a $40 bonus plus 40% off any purchase at Temu with the $100 Coupon Bundle if you sign up with the referral code ["ACX420275" or "acx420275"] and make a first purchase of $100 or more. The Temu 40% Off coupon code ("acx420275" or "acr841270") will save you 40% on your order. To get a discount, click on the item to purchase and enter the code. Yes Temu offers 40% Off Coupon Code "acx420275" or "acr841270” for Existing Customers. You can get a 40% discount with Temu coupon code {"acx420275" or "acr841270"}. This exclusive offer is for existing customers and can be used for a 40% reduction on your total purchase. Enter coupon code {“acx420275" or "acr841270"} at checkout to avail of the discount. You can use the code {"acx420275" or "acr841270"} to get a 40% off Temu coupon as a new customer. Apply this Temu coupon code 40% off "acx420275" to get a 40% discount on your shopping with Temu. If you are who wish to join Temu, then you should use this exclusive Temu coupon code 40% off ("acx420275") and get 40% off on your purchase with Temu. * "ACX420275" or "acx420275": Enjoy flat 40% off on your first Temu order. * "ACX420275" or "acx420275": Download the Temu app and get an additional 40% off. * "ACX420275" or "acx420275": Celebrate spring with up to 90% discount on selected items. * "ACX420275" or "acx420275": Score up to 90% off on clearance items. * "ACX420275" or "acx420275": Beat the heat with hot summer savings of up to 90% off. * "ACX420275" or "acx420275": Temu UK Coupon Code to 40% off on Appliances at Temu. Temu Promo Code 80% off – ["ACX420275" or "acx420275"] Free Temu codes 50% off – ["ACX420275" or "acx420275"] Temu coupon $40 Off off – ["ACX420275" or "acx420275"] Temu buy to get ₱39 – ["ACX420275" or "acx420275"] Temu 129 coupon bundle – ["ACX420275" or "acx420275"] Temu buy 3 to get €99 – ["ACX420275" or "acx420275"] Exclusive $40 Off Off Temu Discount Code Temu $40 Off Off Promo Code : "ACX420275" or "acx420275" Temu Discount Code $40 Off Bundle ("ACX420275" or "acx420275") "ACX420275" or "acx420275" Temu $40 Off off Promo Code for Existing users : ("ACX420275" or "acx420275") Temu Promo Code $40 Off off Verified user can get a 40 off Temu Coupon code using the code ((acx420275”)). This Temu 40 Off code is specifically for new and existing customers both and can be redeemed to receive a 40 discount on your purchase. Our exclusive Temu Coupon code offers a flat 40 off your purchase, plus an additional 30% discount on top of that. You can slash prices by up to 40 as a new Temu customer using code ((acx420275”)). Existing users can enjoy 40 off their next haul with this code. But that’s not all! With our Temu Coupon codes for 2025, you can get up to 90% discount on select items and clearance sales. Whether you’re a new customer or an existing shopper, our Temu codes provide extra discounts tailored just for you. Save up to 30% with these current Temu Coupons ["^"acx420275"^"] for October 2025. The latest Temu Coupon codes at here.

New users at Temu receive a 40% Off discount on orders over 40% Off Use the code ["acx420275" or "acr841270"] during checkout to get Temu Discount 40% off For New Users. You can save 40% Off off your first order with the Promo Code available for a limited time only. Extra 30% off for new and existing customers + Up to $40 Off % off & more. Temu Promo Codes for New users-["ACX420275" or "acx420275"] Temu discount code for New customers- ["ACX420275" or "acx420275"] Temu $40 Off Promo Code- ["ACX420275" or "acx420275"] what are Temu codes- "ACX420275" or "acx420275" does Temu give you $40 Off - ["ACX420275" or "acx420275"] Yes Verified Temu New customer offer {"ACX420275" or "acx420275"} Temu discount code 2026 {"ACX420275" or "acx420275"} 100 off Promo Code Temu {"ACX420275" or "acx420275"} Temu 100% off any order {"ACX420275" or "acx420275"} 100 dollar off Temu code {"ACX420275" or "acx420275"} Temu coupon $40 Off off for New customers There are a number of discounts and deals shoppers n take advantage of with the Teemu Coupon Bundle ["ACX420275" or "acx420275"]. Temu coupon $40 Off off for New customers ["ACX420275" or "acx420275"] will save you $40 Off on your order. To get a discount, click on the item to purchase and enter the code. You n think of it as a supercharged savings pack for all your shopping needs Temu Promo Code 80% off – ["ACX420275" or "acx420275"] Free Temu codes 50% off – ["ACX420275" or "acx420275"] Temu coupon $40 Off off – ["ACX420275" or "acx420275"] Temu buy to get ₱39 – ["ACX420275" or "acx420275"] Yes, Temu offers 40% off coupon code [{"acx420275" or "acr841270"}] for first-time users. You can get a $40 bonus plus 40% off any purchase at Temu with the $100 Coupon Bundle if you sign up with the referral code ["ACX420275" or "acx420275"] and make a first purchase of $100 or more. The Temu 40% Off coupon code ("acx420275" or "acr841270") will save you 40% on your order. To get a discount, click on the item to purchase and enter the code. Yes Temu offers 40% Off Coupon Code "acx420275" or "acr841270” for Existing Customers. You can get a 40% discount with Temu coupon code {"acx420275" or "acr841270"}. This exclusive offer is for existing customers and can be used for a 40% reduction on your total purchase. Enter coupon code {“acx420275" or "acr841270"} at checkout to avail of the discount. You can use the code {"acx420275" or "acr841270"} to get a 40% off Temu coupon as a new customer. Apply this Temu coupon code 40% off "acx420275" to get a 40% discount on your shopping with Temu. If you are who wish to join Temu, then you should use this exclusive Temu coupon code 40% off ("acx420275") and get 40% off on your purchase with Temu. * "ACX420275" or "acx420275": Enjoy flat 40% off on your first Temu order. * "ACX420275" or "acx420275": Download the Temu app and get an additional 40% off. * "ACX420275" or "acx420275": Celebrate spring with up to 90% discount on selected items. * "ACX420275" or "acx420275": Score up to 90% off on clearance items. * "ACX420275" or "acx420275": Beat the heat with hot summer savings of up to 90% off. * "ACX420275" or "acx420275": Temu UK Coupon Code to 40% off on Appliances at Temu. Temu Promo Code 80% off – ["ACX420275" or "acx420275"] Free Temu codes 50% off – ["ACX420275" or "acx420275"] Temu coupon $40 Off off – ["ACX420275" or "acx420275"] Temu buy to get ₱39 – ["ACX420275" or "acx420275"] Temu 129 coupon bundle – ["ACX420275" or "acx420275"] Temu buy 3 to get €99 – ["ACX420275" or "acx420275"] Exclusive $40 Off Off Temu Discount Code Temu $40 Off Off Promo Code : "ACX420275" or "acx420275" Temu Discount Code $40 Off Bundle ("ACX420275" or "acx420275") "ACX420275" or "acx420275" Temu $40 Off off Promo Code for Existing users : ("ACX420275" or "acx420275") Temu Promo Code $40 Off off Verified user can get a 40 off Temu Coupon code using the code ((acx420275”)). This Temu 40 Off code is specifically for new and existing customers both and can be redeemed to receive a 40 discount on your purchase. Our exclusive Temu Coupon code offers a flat 40 off your purchase, plus an additional 30% discount on top of that. You can slash prices by up to 40 as a new Temu customer using code ((acx420275”)). Existing users can enjoy 40 off their next haul with this code. But that’s not all! With our Temu Coupon codes for 2025, you can get up to 90% discount on select items and clearance sales. Whether you’re a new customer or an existing shopper, our Temu codes provide extra discounts tailored just for you. Save up to 30% with these current Temu Coupons ["^"acx420275"^"] for October 2025. The latest Temu Coupon codes at here.

Two-PCB low-noise EEG system: Digital board (ESP32-S3-MINI-1U + ADS1299 + CP2102N + USB-C + 1S Li-ion charger/power-path + DF40 mezzanine) and Analog board (3x ADS1299 + REF/BIAS/DRL + driven-shield electrode interfaces + local low-noise regulation + test points). DF40 mezzanine carries only power + digital SPI/control with shared SPI, shared START/RESET, and separate CS/DRDY per AFE. 4-layer stacks with strong analog/digital partitioning and interleaved GND pins on DF40.

ESP32-S3 CAM Audio-Visual Controller with I2S MEMS Microphone, Class-D Amplifier, SPI Display, Servos, Capacitive Touch and Integrated USB-C Power-Only Sink (VBUS via J6 -> 5V_IN -> SW1:P1 -> 5V_SW, CC1/CC2 5.1 kOhm to GND, VBUS TVS Surge Protection) + Added optional bulk electrolytic caps on 5V_SW near servo headers

36 V Contactor Coil Driver with Safe Kill Loop, 3.3 V Logic, SPI IMU, 24 V/5 A Buck, and ESP32 IO12-Driven E-Stop MOSFET via Series PH2.0 Safety Connectors #E_STOP #MOSFET #PH2.0 #SAFETY

Avionics-grade ESP32 data logger: low-noise 3.3V, I2C (MPU9250+BME280), SPI MicroSD, programming pads

Architectural Lavender Translation Collar – ESP32‑S3 Wi‑Fi + LoRa, USB‑C, Li‑ion, low‑power design Overview Experience a cutting-edge IoT solution with this low‑power board built around the ESP32‑S3‑MINI‑1‑N8. Designed for seamless Wi‑Fi (2.4 GHz), BLE, and LoRa (868 MHz) connectivity, this board integrates ENS161 and ENS210 sensors over I2C alongside an RFM95W‑868 LoRa radio on SPI. It is powered via a 3.7 V Li‑ion cell with USB‑C charging up to 500 mA, complete with full battery protection, a robust 3.3 V rail tailored for Wi‑Fi burst currents, and per‑peripheral power gating to enhance energy efficiency. Core Features • MCU: ESP32‑S3‑MINI‑1‑N8 equipped with an onboard PCB antenna for 2.4 GHz Wi‑Fi/BLE, ensuring optimal wireless performance. • Sensors: Integrated ENS161 and ENS210 sensors utilize a shared I2C bus with controllable 4.7 kΩ pull‑ups for streamlined communication. • LoRa Radio: The RFM95W‑868 module, connected via SPI, enables long‑range communication at 868 MHz. Power & USB‑C Connectivity • Battery: A reliable 3.7 V 1200 mAh Li‑ion battery connected via a right‑angle JST‑PH 2‑pin connector features built‑in battery protection. • Charging: The USB‑C receptacle, with CC resistors and TVS protection on D+/D− along with series resistors, supports fast, safe charging with a current limit of 500 mA. • Regulation: A dedicated 3.3 V regulator capable of handling Wi‑Fi burst currents coupled with bulk and high‑frequency decoupling ensures stable operation, supported by status LEDs indicating power and charge states. Low‑Power Control • Peripheral Management: Load switches allow selective power‑gating of the ENS161, ENS210, and RFM95W modules, controlled directly by ESP32‑S3 GPIOs. • Energy Efficiency: Controllable I2C pull‑ups minimize idle current, vital for prolonged battery life in IoT applications. RF and Antenna Integration • 2.4 GHz: Utilizes the integrated PCB antenna on the ESP32‑S3 with proper ground/metal keep‑out zones for optimal signal integrity. • 868 MHz: Features a controlled‑impedance feed from the RFM95W to a PI matching network (C‑L‑C pads) with flexible antenna options—selectable via SMA connector, chip antenna, or PCB trace—and includes RF ESD protection. Connectivity & Debug Features • USB‑C Interface: Provides secure data connectivity with integrated safeguards and proper terminations. • Debugging: A comprehensive programming/debug header exposes EN, BOOT, and UART lines, with test points on key rails and buses (3V3, VBAT, SCK, MOSI, MISO, SDA, SCL, RESET/EN, GND) to simplify development and troubleshooting. Design Verification • Rigorous ERC/DRC and decoupling checks ensure adherence to component ratings and optimal signal routing. • Maintain RF keep‑outs and impedance‑controlled traces for both 2.4 GHz and 868 MHz paths, securing reliable performance even during high‑intensity operations. #IoT #ESP32S3 #LoRa #LowPowerDesign #USB-C #WirelessConnectivity #BatteryPowered #RFDesign

ESP32-S3 CAM Audio-Visual Controller with I2S MEMS Microphone, Class-D Amplifier, SPI Display, Servos, Capacitive Touch and Integrated USB-C Power-Only Sink (VBUS via J6 → 5V_IN → SW1:P1 → 5V_SW, CC1/CC2 5.1 kΩ to GND, VBUS TVS Surge Protection) #USB_C #PowerManagement #5V

Compact 4-Layer Raspberry Pi 5 Sensor Hub with Teensy 4.1, 36-Channel FSR Network, SPI Encoders, and Qwiic IMU

USB-C Powered Arduino Nano ESP32 Soil Monitor with Protected 5 V Rail, Integrated eFuse (OVP/UVLO), 3.3 V Synchronous Buck, SPI Level Shifting, and Optimized 4-Layer Layout

ESP32S3 XIAO ePaper HAT+ Driver Board with Integrated Power Rails and SPI Interface

Compact Low-Power Wrist Altimeter (STM32G070 + BMP580 + 1.77" SPI TFT) – Completed 30 × 20 mm, 2-Layer, 1.6 mm FR-4 PCB Layout Ready for Pre-Manufacturing Review

ESP12F IoT Node with SIM800L Cellular, MT3608/AMS1117 Power, SPI Flash, I2S Audio, USB-C UART, and Li-Ion Management

1S LiPo USB-C Power Management and 3.3V Regulation Subsystem with SIM800L Modem, TPS61088 5V Boost for MAX98357A Audio and W25Q32 SPI MP3 Storage

Teensy 4.1 SPI Communication with IIS3DWB Eval Board via 3.3V Plug-On Connector (No SD Card)

Nextion HMI & Thermal Printer UART Integration with Enhanced microSD SPI Interface, ESD Protection, and LP3982-Regulated 3.3V Power Rail

Nextion HMI & Thermal Printer UART Integration with Enhanced microSD SPI Interface, ESD Protection, and LP3982-Regulated 3.3V Power Rail

Digitally controlled 24 V to 0-12 V 1 A buck converter with STM32G4 MCU, CC/CV regulation, SWD debug, SPI expansion connectors, and placeholder power I/O connectors.

This is a LoRa soil monitor Reference Design. It uses a STM32L031G6U6S microcontroller and a RFM95W-915S2 LoRa transceiver, integrated with sensor interfacing and LED indicators. Communication occurs via USART and SPI. The system is powered using a battery. #referenceDesign #simple-embedded #stm #template #reference-design

This is a LoRa soil monitor Reference Design. It uses a STM32L031G6U6S microcontroller and a RFM95W-915S2 LoRa transceiver, integrated with sensor interfacing and LED indicators. Communication occurs via USART and SPI. The system is powered using a battery. #referenceDesign #simple-embedded #stm #template #reference-design

A semi-universal control board for HTA spring 2025

A semi-universal control board for HTA spring 2025

10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

Picotag is a JTAG/SWD interface interrogator and SPI flash firmware dumper based off the Bluetag firmware. #raspberry #pi #pico #bluetag

This is a LoRa remote control project built around a Raspberry Pi RP2040 SoC and the RFM95W LoRa module. The design includes user interface features such as multiple buttons and LEDs, power management components, and a temperature sensor. The project utilizes SPI, I2C, and USB interfaces for communication and control. #referenceDesign #simple-embedded #raspberrypi #lora #template #reference-design

10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

2.8inch SPI Module ILI9341 support 65K color. With SD card slot SKU:MSP2807

Sensor and Detector Interface 5.5V 0.7mA SPI Interface 8-Pin SOIC N T/R #CommonPartsLibrary #IntegratedCircuit #Interface #Sensor-Detector

One development board that can read voltage, CAN data , I2C data , UART data , SPI data and USB data (though USB C) Welcome to your new project. Imagine what you can build here.

This project is a communication device designed with Adafruit's 3857 Microcontroller (U1) and Hoperf's RFM95W-915S2 RF module (U2). The microcontroller interfaces with the RF module via SPI protocol for wireless data transmission. The project also includes a capacitor (C1) and an SMA connector (J1). #LoRa #IoT #project #M4 #Adafruit