This project is a reference design based on the BQ25895, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ25895 #ReferenceDesign #charger #BatteryManagemen #referenceDesign #bms #texas-instruments #template #reference-design

This Weather Station Logger project employs the versatile ESP32 microcontroller board, integrated with an SD card slot for data storage. It features a USB interface for easy programming and is efficiently powered by a single 18650 battery, complete with a protection circuit for safe operation. #iot #esp32 #lora #weather #edgecomputing

This is a reference design WiFi remote control utilizing an ESP32-PICO. It includes a battery circuit, a buzzer, and multiple control buttons for inputs. #referenceDesign #simple-embedded #espressif #project #button #esp #template #reference-design

A Buck boost converter that can be powered from Li-ion battery and the output 3.3V @ 500mA. Powered by the TPS63051YFFR and in the same package as a standard Adarfruit buck converter. input Voltage Range: 2.5V to 5.5V

This project is an RFID lock circuit, complete with microcontroller (MCU). It features an RC522 RFID reader for identification, controlled by an STM32F103C8T6 MCU. The structure also includes an OLED display, lock circuit, and user interface switches. Designed to operate with a AAA battery power source. #MCU #referenceDesign #simpleEmbedded #stm #project #STM32 #lock #OLED #template #reference-design

This project is a Battery Management System (BMS) built around STMicroelectronics' STC3115AIQT battery monitor IC. It uses I2C for communication, features alarm management, and supports battery charging. The power supply, battery connection points, and debug interface are facilitated through connectors. #project #Template #charger #referenceDesign #batterycharger #template #bms #monitor #STC3115 #stm #reference-design #polygon

Battery base 2032 BH810 EEMB #BatteryHolder #2032 #SMD

3.7V Lipo Charger. Interfaces with MT3608 Boost Converter to convert 3.7V to 5V. Slot on top of your Arduino and charge your battery while the Arduino is plugged in. Or run your Arduino portably using the battery.

An Expansion board for Arduino Nano and compatible boards. It hosts an L293D Motor driver IC to control 2 DC motors independently. Has provision to add HC-05 / HC-06 Bluetooth Module. All free GPIO pins are easily accessible. Operates on 7.4 - 12V Battery.

A buck boost converter that can be powered from a Li-ion battery and output 3.3V @ 500mA. Powered by the TPS63051 YFFR and inn hte same package as a standard Adafruit buck converter. Input Voltage Range: 2.5V to 5.5V

AvocAudio is a compact tinyML community board designed for extensive audio data collection for various tinyML applications. It leverages the Raspberry Pi RP2040 and integrates a LoRa-E5 LoRaWAN Transceiver Module for connectivity. Equipped with an SD card slot for local data storage, the board ensures efficient data collection. The board operates on solar power or a lithium-ion battery, ensuring flexible and efficient energy use. #raspberryPi #rp2040 #lorawan #iot #solar

A buck boost converter that can be powered from a Li-Ion battery and output 3.3V @ 500mA. Powered by the TPS63051YFFR and in the same package as a standard Adafruit buck converter. Expect to squeeze around 5-10% SoC from a typical Li-Ion battery. Input Voltage Range: 2.5V to 5.5V

The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

Environmental exposure risk measuring device based on ESP32, ultraviolet light (UV) and CO2 gas sensor modules. It has a voltage booster based on MT3608 chip and a solar panel lithium battery charger with MPPT based on CN3791 chip.

Arduino Uno shield used to monitor chimney smoke and provide feedback to stove. This shield powers the Arduino using TEGs and a battery. This shield provides power to an LED, fans, and a light sensor used to detect light intensity.

buck boost converter that can be powered by battery and outputs 3.3v 500mA. Input voltage range: 2.5V to 5.5V

Here’s a detailed project description prompt that you can use to generate the circuit: --- ### Project Description for Circuit Generation **Project Title**: Vehicle-to-Vehicle (V2V) Communication System for Preventing Dangerous Overtaking Maneuvers **Objective**: The prime objective of this project is to develop and implement a Vehicle-to-Vehicle (V2V) communication system that enhances road safety by preventing dangerous overtaking maneuvers. This system will provide real-time alerts to drivers about the presence and intentions of nearby vehicles, reducing the risk of collisions and improving overall traffic flow on highways. **Components**: 1. **Microcontroller (e.g., Arduino)** 2. **GPS Module (NEO-6M)** 3. **LoRa Module (SX1272)** 4. **Audio/Visual Alert Systems (e.g., Buzzer, LEDs)** 5. **SD Card Module** 6. **LM7805 Voltage Regulator** 7. **9V Battery** **Connections**: 1. **Power Supply**: - **9V Battery**: - Positive to **LM7805 Voltage Regulator Input** - Negative to **Common Ground** - **LM7805 Voltage Regulator**: - Output to **5V Rail (VCC)** - Ground to **Common Ground** 2. **Microcontroller (e.g., Arduino)**: - **Power**: - VCC to **5V Rail (VCC)** - GND to **Common Ground** 3. **GPS Module (NEO-6M)**: - **Power**: - VCC to **5V Rail (VCC)** - GND to **Common Ground** - **Communication**: - TX to **RX (Digital Pin) of Microcontroller** - RX to **TX (Digital Pin) of Microcontroller** (if needed) 4. **LoRa Module (SX1272)**: - **Power**: - VCC to **3.3V or 5V (based on module specification)** - GND to **Common Ground** - **SPI Communication**: - MOSI to **MOSI (Digital Pin) of Microcontroller** - MISO to **MISO (Digital Pin) of Microcontroller** - SCK to **SCK (Digital Pin) of Microcontroller** - NSS to **CS (Digital Pin) of Microcontroller** 5. **Audio/Visual Alert System (Buzzer, LEDs)**: - **Buzzer**: - Positive to **Digital Output Pin** of Microcontroller through a resistor - Negative to **Common Ground** - **LEDs**: - Anode (Positive) to **Digital Output Pin** of Microcontroller through a resistor - Cathode (Negative) to **Common Ground** 6. **SD Card Module**: - **Power**: - VCC to **3.3V or 5V (based on module specification)** - GND to **Common Ground** - **SPI Communication**: - MOSI to **MOSI (Digital Pin) of Microcontroller** - MISO to **MISO (Digital Pin) of Microcontroller** - SCK to **SCK (Digital Pin) of Microcontroller** - CS to **Digital Pin of Microcontroller** **System Functionality**: - **System Initialization and Configuration**: Ensure the microcontroller and communication modules are correctly initialized and configured for optimal performance. - **GPS Signal Acquisition and Data Parsing**: Accurately acquire and parse GPS data to determine the vehicle's current location and speed. - **Vehicle Position and Speed Calculation**: Calculate precise vehicle position and speed in real-time to provide accurate data for communication. - **V2V Communication Establishment**: Establish a reliable communication link between vehicles using the LoRa module to transmit and receive data. - **Overtaking Intention Detection and Signal Transmission**: Detect overtaking intentions and transmit this information to nearby vehicles to alert them of potential hazards. - **Signal Reception and Processing by Nearby Vehicles**: Ensure nearby vehicles can receive and process overtaking signals to determine the position and speed of the overtaking vehicle. - **Driver Alert Generation**: Generate audio and visual alerts to inform drivers of the presence and intentions of nearby vehicles, especially during overtaking. - **Continuous Monitoring and Data Logging**: Continuously monitor the system's performance and log relevant data for analysis and future improvements.

The RMLV0808BGSB, manufactured by Renesas, is an 8-Mbit static RAM organized as 1,048,576 words by 8 bits, utilizing Renesas's advanced LPSRAM technology to deliver higher density, enhanced performance, and reduced power consumption. Operating with a single 3V supply voltage range of 2.4V to 3.6V, this component features access times of 45ns for voltages between 2.7V and 3.6V, and 55ns for voltages between 2.4V and 2.7V. It boasts a low standby power dissipation of 0.45µA (typical), making it ideal for battery backup systems. The RMLV0808BGSB is encapsulated in a 44-pin TSOP (II) package, offering equal access and cycle times, common data input/output with three-state output, and direct TTL compatibility for all inputs and outputs. Additional features include battery backup operation and a wide operating temperature range of -40°C to +85°C, ensuring reliability in various applications.

This project is a battery charging circuit utilizing a MAX1555 chip. It features a USB and DC power input, with LED status indicators. The design is outfitted with necessary decoupling capacitors and resistors to ensure smooth operation. #project #Template #charger #referenceDesign #batterycharger #MAX1555 #template #bms #analog #reference-design #polygon

R2 changes: -Moving to Letter Modules for ease of design -Adding ESP32 for WiFi On/Off and intensity control -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template

A solar charging PCB for a 13S 5P lithium-ion battery pack. Charging design parameters: - Input voltage range: 40V to 56V - Battery voltage range: 39V to 54.6V - Input current limit: 12 A - Fast-charge current limit: 10 A - Switching frequency: 350kHz

This Power Supply Template project takes input from USB, Battery and Solar and then charges the battery and and has a 3.3V ouput #template #power #solar

This project is a reference design based on the BQ24230, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ24230 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #texas-instruments #template #reference-design #polygon .

This is a dual voltage input circuit for a NRF battery application.

This project is a Lithium-ion battery charger circuit based on LTC4007 IC. The design incorporates n-channel power MOSFETs and extensive protection features for overcurrent, overvoltage, undervoltage, and overtemperature conditions. It is ideal for portable, battery-powered systems. #project #LTC4007 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #analog #template #reference-design #polygon