Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

Welcome to your new project. Imagine what you can build here.

Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

Designing a Tractive System Active light(TSAL) circuit for an Electric Vehicle which does the following operations 1. The TSAL itself must have a red light, flashing continuously with a frequency between 2 Hz and 5 Hz and a duty cycle of 50%, active if and only if the LVS is active and the voltage across DC-link capacitors exceeds half the nominal TS voltage 2. The TSAL itself must have a green light, continuously on, active if and only if the LVS is active and ALL of the following conditions are true: ● All AIRs are opened. ● The pre-charge relay is opened. ● The voltage at the vehicle side of the AIRs inside the TSAC does not exceed 60 VDC or 50 VAC RMS. This schematic will include only the Green Light logic. We have to take proper care of High voltage and Low voltage isolation in this schematic because it will have to be implemented on the PCB as well.

Design a circuit that detects the presence of the infrared signal. The circuit should light a red LED when infrared signal is detected otherwise it should light a green LED. You may use NPN transistors, IR LED, Photodiode, Red LED, Green LED and a rectifier diode.

This project involves designing a PCB for the lid assembly of an open-source laptop. The design integrates various sensors, including a microphone, camera, and ambient light sensor, ensuring precise alignment with the display glass. It features touch sensors to control LED lighting, spring-loaded contacts for touch-key interaction, and 3D-printed light diffusers for efficient lighting. Additionally, the PCB includes a power management system with status LEDs and a PFC for connecting to the external laptop PCB. The goal is to create a versatile, upgradeable, and user-friendly component for the laptop's lid. Specific parts of the project include 1. Microphone - Audio input capture 2. Ambient Light Sensor Module - Light intensity measurement 3. Camera - Video capture 4. LDO Regulators (3 TLV74 Series) - Voltage regulation for different components 5. Crystal - Clock generation 6. Touch Sensor Controller - Touch-key interaction 7. Flip-Flop - State keeping in logic circuits 8. LEDs (LTRBR37G Series) - Lighting indication 9. FPC Connector - Interface with main laptop PCB

RGBW SMD,5x5mm Light Emitting Diodes (LED) ROHS #LED#Addressable

This circuit found detect when is someone present and is the night to turn on a light.

Arduino Uno shield used to monitor chimney smoke and provide feedback to stove. This shield powers the Arduino using TEGs and a battery. This shield provides power to an LED, fans, and a light sensor used to detect light intensity.

A semiconductor light source that emits light when current flows through it.

Plant monitoring HAT for Raspberry Pi 4 model B with light intensity, temperature, humidity, CO2 sensing, and camera attachment

Have you ever wanted to wake up to one of the most energizing scents? Have you ever wanted that cup of energy in your hands before you even slide out of your covers? Well want no further! Introducing the Coffee Waker; The knight of your nightstand, a coffee maker alarm clock with one soul purpose, to quickly and scrumptiously wake you up. This is the Coffee Waker Main board. It contains an ESP32-S3, 16 bit Load Cell ADC, 16 bit MP3 DAC, 120V heater cartridge relay, and 12C wakeup light convector.

Have you ever wanted to wake up to one of the most energizing scents? Have you ever wanted that cup of energy in your hands before you even slide out of your covers? Well want no further! Introducing the Coffee Waker; The knight of your nightstand, a coffee maker alarm clock with one soul purpose, to quickly and scrumptiously wake you up. This is the Coffee Waker Main board. It contains an ESP32-S3, 16 bit Load Cell ADC, 16 bit MP3 DAC, 120V heater cartridge relay, and 12C wakeup light convector.

Arduino Uno shield used to monitor chimney smoke and provide feedback to stove. This shield powers the Arduino using TEGs and a battery. This shield provides power to an LED, fans, and a light sensor used to detect light intensity.

Hand-sized pumpkin PCB The copper has been removed at the eyes and mouth so light can shine through from the back! 555 Timer has been selected to provide LED flashing at 0.5Hz Adjust R2 for differing speed!

Environmental exposure risk measuring device based on ESP32, ultraviolet light (UV) and CO2 gas sensor modules. It has a voltage booster based on MT3608 chip and a solar panel lithium battery charger with MPPT based on CN3791 chip.

Arduino Uno shield used to monitor chimney smoke and provide feedback to stove. This shield powers the Arduino using TEGs and a battery. This shield provides power to an LED, fans, and a light sensor used to detect light intensity.

Montaje de un circuito inversor de onda senoidal modificada.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.